Geser pelat - hidrolik

BAYKAL HGL 3100 x 6

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Nodpfx Ajh Hvk Ajn Uecu Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Nsdpfx Ascc D Ddon Uocu Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: sangat baik (bekas), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment / Accessories: - Aktiv digital display, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and is horizontally extendable by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication - Machine vise - Various toolholders/collets/tools Ncjdpfeyll A Tex An Ueu Dimensions (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Videos demonstrating geometry can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout, horizontal spindle: 0.001 mm Runout, vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X axis: 0.01 mm (measuring length 300 mm) Videos of the geometry measuring process can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New way cover on Z axis + various mounting parts - Machine overhauled - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Functional test performed

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. Nodpfxjrfx Uto An Uscu If you have any further questions, we would be happy to answer them.

Kondisi: baik (bekas), NHH lathe Swing over bed: 260 mm Nsdpfjmw Ukcjx An Uocu Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Spindle speed: 2,000 rpm Dimensions: 150x85x155 cm (LxWxH)

Kondisi: bekas, Tahun pembuatan: 1993, 610cae60-d4cd-4390-8b48-41f7cbf6147d Ncodpfxsu Rni Hs An Uju

Kondisi: baru, Turning diameter: 400 mm Turning length: 1000 mm Nsdpfxod Eaukj An Uecu Speed range: 70 - 2,000 rpm Weight approx.: 500 kg Description: - Lead and feed screw lathe featuring a robust design and straightforward operation. TM 4010D with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of headstock housing due to heavily ribbed GG25 cast iron - Hardened and ground face spindle ensures outstanding accuracy and durability - High material removal during roughing operations allows for fine surface finishes and tight tolerances - Wide range of threads and feeds without having to change gears in the gear train - Bed guideways hardened and precision-ground - Precisely running main spindle mounted in precision ball bearings - Mechanical longitudinal feed disengagement on the carriage with four adjustable eccentrics - Electronic main spindle brake - All control elements (electrical) are easily accessible from a central location - 4-position longitudinal stop - Quick change tool post SWH 3 TM 4010D – Digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed, and glare-free - Increased working accuracy - Error rate is reduced - X, Y, Z0, Z axes with 8-digit display each - Glass scales Equipment details: Feed gearbox – all gears made of steel - hardened and ground - Shafts run on needle bearings - all components lubricated in oil bath Apron – entirely sealed housing - With safety device against simultaneous operation of threading and feed mechanism Tailstock – hardened and ground quill - generously dimensioned - quill with scale Prismatic bed – heavily ribbed cast iron - high rigidity Machine lamp – complete illumination of work area Main spindle – precision running - high load capacity - mounted in precision taper roller bearings Machine base – pre-assembled Tool compartment Operator panel – user-friendly membrane keypad - machine lamp - coolant pump - direct drive - two-stage motor switch - emergency stop pushbutton Coolant tank – removable - level indicator - easy and complete drainage and cleaning Control cabinet – clearly arranged - 24V DC power supply - all contactors and relays from Schneider or Siemens Chip tray – foldable - easy chip removal Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6-MK 4 - Change gear set Technical Data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phases: 3 Current type: ~ Network frequency: 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar passage diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Centre distance: 1,000 mm Swing over bed: 400 mm (continues if required)

Kondisi: baik (bekas), Translation into English: Ncedpsxl E Syefx An Ueu x-travel: 400 mm y-travel: 375 mm z-travel: 250 mm Table size: 205 x 800 mm T-slots: 4 x 45 14 H7 Spindle speeds: 50 - 3150 rpm Tool holder: 40 ISO Quill stroke: 50.0 mm Feeds X + Z axis: 5.0 - 1000 mm/min Feed Y axis: 5.0 - 670 mm/min Rapid traverse: 2.4 / 1.6 m/min Control: Heidenhain Total power requirement: 5.1 kW Weight: 950 kg Dimensions (LxWxH): 1860 x 1790 x 1750 mm From a training workshop (vocational school) Well-maintained condition (!!) Equipment/Features: - MAHO universal milling/drilling machine - HEIDENHAIN positioning/contouring control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Practical and simple operation - Electro-mechanical feeds on all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swiveling milling head, adjustable to both sides - Tiltable universal T-slot table - Vertical clamping area - Infinitely variable speed adjustment - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping - Coolant system - Front coolant drip tray - Operating manual

Kondisi: baru, Tahun pembuatan: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1,750 rpm Table size 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space required approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations, equipped with DPA 31 Plus 3-axis digital position display Description: - Heavy, robust construction made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground, hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precisely ground surface with T-slots and adjustable gibs - Milling head tiltable ± 45° - Forward and reverse rotation - X-axis can be moved either by handwheel or via the table feed device Njdpfx Anjtv Riaj Uocu - Automatic end stop for the X-axis - Height-adjustable safety screen with microswitch for protection against flying chips and parts, offering maximum operator safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Drill chuck arbor ISO40 / B18 - Horizontal milling spindle with counter bearing, disc cutter arbor Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal operation - T-slot nuts - Drift - Operating tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, 300 mm turning diameter Turning length 1700 mm Swing diameter over bed slide 600 mm Total power requirement 12.5 kW O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock without obligation: WEISSER HEILBRONN LZS Universal Lathe Type HEKTOR Year of manufacture 1980 _____ Centre height 300 mm Max. swing diameter over bed 600 mm Max. swing diameter over cross slide 390 mm Distance between centres 1,700 mm Spindle bore / Morse taper 5 88 mm 14 spindle speeds 18 – 900 RPM Longitudinal feeds 0.028 - 0.8 mm/rev Facing feeds 0.03 - 0.5 mm/rev 40 metric threads 0.4 – 14 mm/rev 38 Whitworth threads 2 – 72 TPI Spindle drive 12.5 kW Total drive 14 kW - 380 V - 50 Hz Weight 2,500 kg Accessories / Special features: • Hardened and ground guideways • Removable gap bridge for larger turning diameter • 3-axis HEIDENHAIN digital readout with tool memory function • Mounted FORKARDT 3-jaw chuck 315 mm Ø equipped with a robust chuck guard complying with CE regulations • Equipped with a 4-jaw chuck 315 mm Ø and a 3-jaw chuck 315 mm Ø, with an additional steady rest • Quick-change toolholder with 6 inserts • Rear chip guard wall with coolant system and separate chip tray • Drill chuck and thread cutting chuck, miscellaneous accessories, etc. Condition: good – ready for demonstration / Machine is ideal for the workshop Delivery: ex-stock, as inspected Payment: strictly net, upon collection after receipt of invoice We look forward to receiving your order. Further lathes of all sizes available in stock – please enquire. Nedpfsytg Uysx An Uocu