Mesin pemotong laser

BODOR BODOR-3015-4020

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Lhedjw Df A Sspfx Ac Hoc Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 – 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Max. tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Lsdpfx Ajd Ev Upjc Hshc Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 47.000 h, daya laser: 2.000 W, gaya punching: 76 t, berat benda kerja (maks.): 120 kg, jangkauan kerja: 2.500 mm, Perlengkapan: penghadang cahaya keselamatan, unit pendingin, Special equipment: + Thread forming function with thread former breakage monitoring + MultiTool function + Marking/Fast Beading function + Secondary ram Lodpfxewcq Hgo Ac Hjhc + Sensor for parts chute Standard equipment: - Robust C-frame - Coordinate guidance with integrated linear magazine - 21 tool and clamp positions - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact extraction system - Rotatable tool holder - Automatic secondary ram with hold-down device - Automatic parts chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Punch spray lubrication - Second lubricant container - Scrap slug extraction - Chip bucket - Hydraulic quick disconnect - External control panel - 15" TFT color touchscreen - USB stick interface - 3.5" floppy disk drive - Safety devices - RJ45 network port - Network connectivity - Detailed operating instructions - Remote diagnostics system

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off Ledpfx Aced Iipmo Hohc 5. Raise frame just above the material 6. Vise opens

Kondisi: baru, Tahun pembuatan: 2025, de Lodpfx Acjhv U U Dj Hshc

Kondisi: baik (bekas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Ledpfx Acjd Tx Ahj Hohc

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Throat depth: 250 mm Lhjdpfx Ascxxx Hoc Hsc Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight approx.: 3.5 t

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Ledpfxohcnxre Ac Hshc Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been completely cleaned and inspected. The drilling machine features a numerically controlled drilling unit that moves in the longitudinal direction (X-axis), with an adjustment range of 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: - Profiled and flat steel support with guide rail and fixed table, total length 15 m - Mobile drilling unit for longitudinal positioning along the workpieces - Horizontal drill head with single spindle - Additional drill head storage in X-axis direction - Clamping device for securing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drill spindles: 1 pc - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Spindle speed: 180 - 3000 rpm Ljdpev Iamzofx Ac Hshc - Holder: HSK A80 - Tool changer: 1 x 6 For more information, please contact us.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, daya laser: 4.000 W, EN Ledpfx Acjuthz To Hjhc