Mesin Grafis FGT-DIE-CUTTING STREET

BOGRAMA DIE-CUTTING STREET

Tahun pembuatan: 2006, Kondisi: bekas, Cross Stacker Gaemmerler KL 540 with Integrated Blocker VM 500 The KL 540 Cross Stacker operates using the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and ready for operation Ndodpfx Abeh Nrh Ue Eed Technical Data: Cycle Time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo ejector (depending on product) Number of Pages: 4 – 96 (heatset / gravure) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal ejector) B: 140 – 500 mm D: max. 560 mm Layer Height: max. 200 mm Stack Height: max. 300 mm Weight: approx. 1,500 kg Blocker Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and a blocking time of 2 sec. The cycle time per package increases if the blocking time is increased or the package height is reduced. The cycle time is also heavily influenced by the ejection speed of the cross stacker and therefore by the product (surface, format). Formats: Width: 140 to 500 mm / 5.5" to 19.7" Length: 105 to 330 mm / 4.13" to 13" Stack Height: 55 to 400 mm / 2.16" to 15.7" Infeed Height: 890 mm / 35" Outfeed Height: 890 mm / 35" Connection Load: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air Requirement: 1000 Nl/min, 6 bar; non-lubricated, dry air Weight: approx. 500 kg

Tahun pembuatan: 2025, Kondisi: baru, SEMIAUTOMATISCHE KASCHIERMASCHINE Nodpfx Abegnlv De Eedd MODELL: MAGRAFKA-100 BAUJAHR: 2025

Kondisi: baik (bekas),

Kondisi: belum diuji (bekas), Hydraulic press for compacting paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Ndedpfx Aboh Nyfyo Eed Length: 4850 mm, width: 1370 mm, height: 3000 mm (can be reduced to 2300 mm). Weight approx. 3500 – 4000 kg. For further information, please contact: +48 539 660 495.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, MBO K 800.2/6 SKTL AUT with pallet feeder and including ASP 66 ME delivery unit Parallel fold section with automated pocket (6 units) and roller adjustment MBO knife shaft cassette Cross and three-fold section with pneumatic knife control + pocket is fully automated (can be rotated 180° in just a few steps) Ndjdporwzmwsfx Ab Eod Knife folding unit with rotatable three-fold knife on LEFT and RIGHT side plus Parallel fold pocket in the knife folding unit on BOTH LEFT and RIGHT sides The main computer, including the touch-screen monitor, was replaced in 2022!

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 894126H, Condition: Very good condition // fully overhauled – new heater Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Ndodperigyzofx Ab Eod

Kondisi: siap digunakan (bekas), Max. operating overpressure: 11 bar, motor speed: 2,945 rpm, rated power: 30 kW, operating hours: 67,212 h. Nsdpfx Ajl Eyq Rob Eodd

Tahun pembuatan: 2014, Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Nodpfxeh Eibaj Ab Eodd Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: siap digunakan (bekas),