Pompa vakum

Busch RA 302 D

Kondisi: diremajakan ulang (bekas), Busch vacuum pump RA302D, completely overhauled. 0.5 mbar, 300 m³/h, 5.5 kW. 2 units available from stock. Dodpfx Aewv Rc Ielyjkr

Tahun pembuatan: 2024, Kondisi: baru, Mesin pelabel otomatis FL-430 sangat cocok untuk pelabelan cepat dan otomatis pada produk datar. Melalui sistem pemisah gesekan, produk dengan ketebalan, dimensi, dan bahan yang berbeda dapat dipisahkan dengan mudah dan andal. - Layar LCD - Kecepatan standar hingga 30 m/menit, serta lebar label maksimum 140 mm jika dipadukan dengan sistem pemisah gesekan 400. Dkodpfx Aloickh Rjyjr - Versi yang ditingkatkan untuk memberikan label dengan kecepatan maksimum hingga 50 m/menit dan lebar maksimum hingga 260 mm. - Pelabelan transparan dimungkinkan.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 218 kg, panjang total: 962 mm, lebar total: 563 mm, tinggi total: 420 mm, laju aliran volumetrik: 360 m³/jam, daya: 75 kW (101,97 hp), frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: udara, kecepatan rotasi (maks.): 1.720 rpm, masa garansi: 12 bulan, jenis perlindungan (kode IP): IP55, kecepatan rotasi (min.): 1.420 rpm, bomba_vacio_mv_0300e Dkodpfx Aloftzv Ujyer

Kondisi: bekas, Rotary vane vacuum pump Manufacturer: Busch Model: R5 RA 302 D Dkjdpsdbbzisfx Alyor Voltage: 50/60Hz 400V Nominal suction capacity: 300 m³/h Ultimate pressure: less than 0.5 hPa (mbar) Condition: Fully overhauled Warranty: 12 months Included: New motor bearings, new paintwork, electrical inspection Delivery time: ex stock

Kondisi: seperti baru (mesin pameran), ATEX-CERTIFIED PUMP Dedpfeftzgxjx Alyjkr Oil-sealed rotary vane vacuum pump. Available in stock. Fully overhauled pump. Comes with warranty. Nominal flow rate: 30 m³/h at 50Hz. Ultimate vacuum: 1x10^-3 mbar abs. For any questions, please contact us.

Kondisi: baru, Tahun pembuatan: 2025, Bobot Berat kosong: 1.800 kg Fungsionalitas Penandaan CE: ya Kondisi Kondisi umum: sangat baik Kondisi teknis: sangat baik Kondisi visual: sangat baik Identifikasi Nomor referensi: 2 Dsdeq Ixuvepfx Alyokr Informasi lainnya Cocok untuk mesin berikut: 20-35 ton Ketentuan pengiriman: EXW Negara produksi: KR Informasi lebih lanjut Silakan hubungi Ö. Inalkac untuk informasi lebih lanjut.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. Djdpfxoqt Dmys Alyjkr According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Rotary vane vacuum pump with oil bath. Available in stock. Pump thoroughly overhauled. With warranty. Nominal flow rate: 300 m³/h Final vacuum: 0.1 mbar abs. For any inquiries, please contact us. Dkedpfjftzzgex Alysr

Kondisi: baru, nomor mesin/kendaraan: 246203 xxxx, Fungsionalitas: berfungsi sepenuhnya, Model Building Gantry Milling Machine – The Ideal Base for Constructing CNC Machines and Applications. Dkedpfjhqmamjx Alyjr The FB2 flat-bed unit is an excellent entry point into CNC technology and is perfectly suited for model building and hobby use. The FB2 is also frequently deployed in industry for measurement and dosing technology, as it offers extensive expansion options. Access to the isel modular system is also available with this unit. Various travel sizes, from 530 x 500 mm to 1030 x 1250 mm, as well as expansions like base frames and enclosures, are available and can be configured individually. IDEALLY SUITED FOR: • Perfectly suitable for laboratory, model building, and workshop environments • Assembly and mounting • Printing and engraving • Drilling and milling • Dosing and screwdriving • Shaping and modeling • Gluing and encapsulating • Soldering and welding • Measuring and testing • Sawing and cutting, and much more Z-clearance = 190 mm (Z-clearance = 300 and 500 mm available upon request!) FEATURES: • Durable stepper motors in the 200 W class • Equipped with reliable LES units driven by steel ball screws • Workpiece clamping with T-slot plate • Available with or without protective hood • Customizable gantry clearances, tailored to customer requirements OPTIONS: • iFM or UFM spindle motor • Coolant spray system • Cool-Min cold air cooling • Automatic tool length measurement • Rotary units • Workpiece clamping systems (lever clamps, vacuum tables, etc.) • Extraction systems • LED machine room lighting • RAL color selection • CAD/CAM software • Clearances of 190 mm, 300 mm, or 500 mm • High-performance 4-axis control controller • Base frame • Enclosure with sliding or folding doors

Kondisi: bekas, Tahun pembuatan: 1966, Max. pulling force 5 t, max. lift 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3–90 mm, bore diameter 13–500 mm, workpiece weight 6,000 kg, machine base depth below floor level 1,400 mm. Dksdpfx Ajcm Elnjlyjr