Kepala penggulung benang

BWF RK 12-20

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), Connected load: 84 kVA, Length: 5,065 mm, Width: 1,100 mm, Height: 1,530 mm. Knjdpeg A Trgofx Aahof

Kondisi: baru, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD pipe deburring machines remove burrs from pipes after cutting. This machine simultaneously removes internal and external burrs from pipes and profiles without requiring rotation of the pipe material. Round, square, rectangular, and various other pipe and profile shapes can be deburred within just a few seconds. Kjdpfxod Ixbzj Aahsnf Thanks to the rotation of the brush, the operator does not need to rotate the pipe. The pipe clamping system allows for precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Knodeia Rtdepfx Aahjf Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: sangat baik (bekas), The SB-10 grinding machine enables flawless grinding of boring bars, threading tools, parting tools, or boring rods made from HSS or carbide, for use in jig boring machines or lathes. By adjusting the rake angle to match the material, you achieve optimal tool performance and extended tool life. Nowadays, these boring bars are still often ground manually before being used on high-quality machine tools. On the SB-10, the tools are ground using a profile wheel with a custom-shaped grinding wheel edge. The desired profile is easily achieved with a dressing diamond and a template mounted on the machine. For excellent stability and surface quality, the horizontal slide runs on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Ksdjfqicxepfx Aahonf Longitudinal travel: 130 mm Cross travel: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions WxDxH: approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Knodpfowl An Isx Aahef

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Knjdeiw Dlkjpfx Aahef Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.

Kondisi: baru, Tahun pembuatan: 2025, Heating output / nominal heat output: 21 kW For rooms of approx. 300 to 500 m³ (according to DIN 4108) Flue gas outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Knjdpfshvibzjx Aahsf Filling opening dimensions (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2 % Energy efficiency class: A+ The EWI-A 15G room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the emission limits specified in the 1st BImSchV (Federal Emission Control Ordinance).

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Knedeixntwopfx Aahsf Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Knoded N H A Nepfx Aahef Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Kodpfx Aajqzkdmjhjnf