Pers keling

Carlo Salvi RF/635/SV

Kondisi: bekas, Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M20I/8324, Nomor Penawaran: M20I/8324 Jenis Mesin: Mesin Press Rivet Merek: Carlo Salvi Tipe: RF/635/SV Tahun Pembuatan: 1985 Rentang Diameter: 2-6,35 mm Panjang batang di bawah kepala: 70(65) mm Panjang potongan: 87 mm Iisdewi Udcspfx Akpsc Kapasitas unit/menit: 360(320) Lokasi: Di Jerman

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin Press Progresif SACMA SP260 5 Matrik - Seperti baru - Berfungsi sempurna Tersedia untuk semua pengujian di HBR srl. Sudah direkondisi total Informasi teknis: Jumlah matrik: 5 Tenaga pemukul: 800 KN Diameter cutoff maksimum 500N/mm²: 11,5 mm. Panjang cutoff maksimum: 85 mm. Maksimum langkah ejector pada matrik: 65 mm. Maksimum langkah ejector pada punch: 20 mm. Kecepatan: 275 pcs/menit Daya motor utama: 30 KW Diameter matrik: 54 mm. Panjang matrik: 90 mm. Diameter punch: 45 mm. Berat bersih: 11.300 kg. Berat kotor: 13.000 kg. Kami menanti Anda di HBR srl di Calolziocorte (LC) Isdpfewar Efsx Akpeic

Kondisi: bekas, Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M20L/9019, Nomor penawaran: M20L/9019 Jenis mesin: Mesin press riveting Merek: Carlo Salvi Tipe: RF/635/SV Iiodpox Edtcefx Akpec Tahun pembuatan: 1985 Rentang diameter: 3–6,35 mm Panjang batang di bawah kepala: 65 mm Panjang potongan: 87 mm Kapasitas unit/menit: 360 Lokasi: Tersedia di gudang kami

Kondisi: baru, Tahun pembuatan: 2024, panjang poros di bawah kepala: 80 mm, panjang ulir: 55 mm, kecepatan perjalanan (maks.): 480 mm/menit, EW MENN GW63 Flat Die Thread Rolling Machine Fully overhauled to as-new condition. Fitted with new guides, new vibrator, and new vibrating discharge chute. New electrical system with inverter and PLC. Thread size: M8 x 80/55 mm. Production rate: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Die length: 115 / 130 mm. Iiedpot Uucaefx Akpjc Available for inspection and testing at HBR srl - Calolziocorte (LC), Italy.

Tahun pembuatan: 1988, Kondisi: baik (bekas), Carlo Salvi, modelo 780/SV, cabezal de una matriz y dos golpes. Diámetro máximo de corte: 6,35 mm. Longitud máxima de corte: 97 mm. Longitud máxima de expulsión (lado de la matriz): 80 mm. Velocidad máxima: 360 piezas por minuto. Iijdpfx Akohrdmxspsc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, panjang poros di bawah kepala: 30 mm, panjang bagian (maks.): 52 mm, Hilgeland CH1 KHA Double-Action Press Iiedpfx Asur N Daokpjc Year of manufacture: 1970 The machine is ready for immediate use!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, STAR ECAS 12 CNC Swiss-Type Automatic Lathe TECHNICAL DATA Maximum machining diameter: 13 mm Max. headstock stroke: 205 mm Maximum drilling capacity (stationary tool): 10 mm Maximum drilling capacity (powered tool): 8 mm Maximum tapping capacity (stationary tool): M8 x P1.25 Maximum tapping capacity (powered tool): M6 x P1.0 Maximum milling capacity: 10 mm Maximum die cutting capacity: M8 x P1.25 Maximum slotting capacity: 1.5 x 4 mm Feed rates (Z1, X1, Y1, Z2, X2, Z3, X3, Y3): 18,000 mm/min C1, C2 axis feed rate: 194,400°/min Maximum turning feed rate (Z1, X1, Y1, Z2, X2, Z3, X3, Y3): 18,000 mm/min C1, C2 axis turning feed rate: 194,400°/min Iijdewf Aclepfx Akpsc Minimum programmable increment (X1, X2, X3): 0.001 mm Minimum programmable increment (Z1, Z2, Z3, Y1, Y3): 0.001 mm Minimum indexing increment (C1, C2): 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions (L x W x H): 2,588 x 1,150 x 1,765 mm Centre height: 1,040 mm Weight: 3,500 kg SCOPE OF DELIVERY Includes (selection not exhaustive): - Star ECAS 12 CNC Automatic Lathe - Coolant tank / Pump - High pressure unit - Transformer - Operating documentation Exact scope of delivery according to photo documentation No guarantee is given for the correctness, completeness, or currentness of the information provided.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Isdpfx Aouz If Nokpeic Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm FRONT TOOLPOST - Number of positions: 5 BACK WORKING STATION - Number of positions: 4 - Number of driven positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Spindle hours: 18,849 h ACCESSORIES - CNC control: Fanuc 31i-model A - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank Iisdpjuha Nwofx Akpoc * With high-pressure pump: 20 bar - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of driven tool holders: 5 - Double drilling/milling tool holder: 1

Tahun pembuatan: 1998, jam operasional: 64.082 h, Kondisi: baik (bekas), Extruder Cincinnati ini berada di gudang mesin Plastima Used Machinery. Mesin ini berasal dari tahun 1998. – Merek: Cincinnati – Model: Titan 45R-APC – Tahun pembuatan: 1998 – Extruder sekrup ganda kerucut Iiedpfsq Tr T Rex Akpsc – Diameter sekrup: 45 mm – Jam operasi: 64.082