Mesin Peledakan Tumblast

CETINGIL TK - 6 Ø: 1000 mm NEW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.851 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 500 kg, berat keseluruhan: 17.000 kg, kapasitas tangki oli: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Pressing force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific pressing force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 22 kW Total installed power: 65 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³ approx. 5.5 t/h - 50 kg/m³ approx. 7.5 t/h - 100 kg/m³ approx. 9.7 t/h Bale weights with a bale length of approx. 1.2 m: up to 500 kg (material dependent) PLC control: Siemens S7-1500 Operator panel: Schneider Harmony Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for processing loose bulk materials of small grain size - OptiCut XS system for reduced cutting force and increased throughput - Special press ram for compacting "difficult" materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive power: 4.0 kW Belt speed: approx. 0.3 m/s Feed belt length: 2,679 mm Inclined belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height (inclined belt): 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN quality N) Total height: 4,515 mm Transport dimensions (overall): 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling line: The entire plant is in very good condition due to its low operating time of only 1,851 pump hours and processing exclusively paper, cardboard, and film. Scope of delivery: - Avermann baler, model AVOS 1410 BS-22/50, incl. wire threading stations and bale chute - Avermann conveyor, model KGF GB 1500 - BOREMA personnel protection system, model APSS iBOR 22 Remarks: Complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors. Kjdpfju Thbxex Aayedw

Kondisi: sangat baik (bekas), MEMBRANE PRESS Kdsdjrwxz Repfx Aayjw For coating MDF-shaped panels with PVC, PP, and PET with VARIOPIN fully automatic substructure system Automatic front loading/unloading and preparation table (double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions mm: 1500 x 2800 mm Usable working dimensions mm: 1250 (or 2 x 600) x 2550 Front loading side from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programmer) SIEMENS SIMATIC Panel Touch Installed total power approx. 50 KW OPTION "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Y: 500 mm, rentang pengukuran sumbu Z: 300 mm, Visio 500 mesin ukur 3D optik/taktile Ruang gerak 453 (400 X, 500 Y, 300 Z) Perangkat lunak pengukuran: PC-DMIS CAD Versi 2015 Gudang pengganti probe 6 slot, dengan total 2 modul TESASTAR MP Silent PC Big Tower dengan Windows 7 (semua sudah terinstal dan siap pakai) Kamera dengan zoom optik 200x, pencahayaan cincin/koaksial dan transmisif (diascopic) Ksdpjiyymrsfx Aayodw Semua berfungsi penuh. Sumbu Y memiliki goresan ringan, sudah dihaluskan. Tidak mempengaruhi fungsi atau akurasi.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. Ksdpefg E Hpsfx Aayodw - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: sangat baik (bekas), Zeiss Model: EVO 50 The instruments of the EVO product family combine powerful scanning electron microscopy with an intuitive operating concept, making them equally well-suited for both experienced users and beginners. Thanks to its extensive range of options, the EVO can be precisely configured to meet your requirements—whether you work in the fields of life sciences, material sciences, or in routine industrial quality control and failure analysis. Scanning Electron Microscope EVO 50, EDS from Oxford Ultim Max 100 SDD Detector (09 / 2019) Dimensions (D x W x H): 930 x 1930 x 1600 mm Sensor Size: 100 mm² / 130,000 cps Weight: approx. 750 kg Condition: used Kdjdjvxubhepfx Aaysw (Specifications and technical data subject to change and errors excepted!) Please inquire about transport options before purchasing. We are happy to answer any further questions for you by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Pipe Ø: 25 – 60 mm Wall thickness: 1 – 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Kdodpfx Aaeuc Shuoysw Finished pipe length: 3,600 – 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Speed: max. 100 m/min Working direction: left → right Line configuration: - Decoiler - Shear (crop shear) - Welding table - Edge trimming shear with scrap cutter - Scrap conveyor - Strip edge preparation - Entry table - Forming unit - Internal/external scarfing tools - Cooling section - Sizing section - Testing unit and length measurement - Cut-to-length - Ejection station for reject pipes - Blow-out station - Oiling station - Bundling station - Strapping station - Bundle removal - Electrical system

Kondisi: baru, Tahun pembuatan: 2025, -Tfon Leveltech® TF M-5516 Mesin Perata Dirancang untuk perataan presisi, TF M-5516 mampu mengolah ketebalan material 1 hingga 15 mm secara efisien dengan fitur kontrol canggih untuk kinerja optimal dan kemudahan penggunaan. -Spesifikasi Utama Kdedpfx Aekyrqfjayew -Ketebalan Material: 1 – 15 mm -Lebar Material Maksimum: 1.600 mm -Panjang Material Minimum: 110 mm Sistem Ganti Cepat untuk Roller Perata: Standar Pengaturan Celah Perataan: Servo Hidrolik / Dikendalikan PC Perlindungan Overload: Standar Layar Kontrol: Layar Sentuh Ukuran Mesin (P × L × T): 3.500 × 2.905 × 1.950 mm Berat Total: 19.000 kg.

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Kdedpfx Ash Rdwxeayjw Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories - Quality Made in Germany The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Under-table press Pressing force: 300 kN Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Kodpfxskuz T Ue Aayedw Control: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Kondisi: baru, Tahun pembuatan: 2025, -TFON Leveltech® Richtmaschinen-Serie Modell: L-9060 Materialstärke: 1,0 mm – 30,0 mm Maximale Materialbreite: 600 mm Minimale Materiallänge: 145 mm Ebenenspaltverstellung: Servo-hydraulisch / SPS-gesteuert Überlastschutz: Standard Maschinengewicht: 26.000 kg Kodpjhwb U Tofx Aaysdw Maschinenabmessungen (L × B × H): 4.400 × 7.185 × 2.260 mm Modell: L-9011 Materialstärke: 1,0 mm – 30,0 mm Maximale Materialbreite: 1.100 mm Minimale Materiallänge: 145 mm Ebenenspaltverstellung: Servo-hydraulisch / SPS-gesteuert Überlastschutz: Standard Maschinengewicht: 31.000 kg Maschinenabmessungen (L × B × H): 4.600 × 7.185 × 2.260 mm Modell: L-9013 Materialstärke: 1,0 mm – 30,0 mm Maximale Materialbreite: 1.300 mm Minimale Materiallänge: 145 mm Ebenenspaltverstellung: Servo-hydraulisch / SPS-gesteuert Überlastschutz: Standard Maschinengewicht: 35.000 kg Maschinenabmessungen (L × B × H): 5.000 × 7.185 × 2.260 mm Modell: L-9016 Materialstärke: 1,0 mm – 30,0 mm Maximale Materialbreite: 1.500 mm Minimale Materiallänge: 145 mm Ebenenspaltverstellung: Servo-hydraulisch / SPS-gesteuert Überlastschutz: Standard Maschinengewicht: 40.000 kg Maschinenabmessungen (L × B × H): 5.200 × 7.185 × 2.260 mm Modell: L-9020 Materialstärke: 1,0 mm – 30,0 mm Maximale Materialbreite: 2.000 mm Minimale Materiallänge: 145 mm Ebenenspaltverstellung: Servo-hydraulisch / SPS-gesteuert Überlastschutz: Standard Maschinenabmessungen (L × B × H): 5.700 × 7.185 × 2.260 mm.