Trailer kuda

Cheval Liberté Pferdeanhänger GOLD Origins Sattelkammer grau

Kondisi: baru, berat kosong: 520 kg, berat muatan maksimum: 2.180 kg, berat keseluruhan: 2.700 kg, panjang ruang muatan: 4.050 mm, lebar ruang muat: 2.000 mm, ukuran ban: 185/60R12,

Kondisi: bekas, Fungsionalitas: tidak berfungsi, Tahun pembuatan: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the rear ramp of the vehicles, which allowed the military to transport a truck or other military equipment. The XV following LARC indicates the maximum transportable weight: 15 tonnes. The vehicles are constructed from aluminium and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each producing 300 hp. This enabled the vehicles to achieve a top speed of 48 km/h on land and 9.5 knots on water, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tonnes. The maximum permissible weight is 35.5 tonnes. The previous owner intended to convert the boats to a fully electric drive system to organise sightseeing tours on the Wadden Sea. Nsdpfx Aoxcgy Hjhwewc Approximately €200,000 was invested, however the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 80/45 Tech Clamp force: 45 tons, tie-bar-less Screw diameter: 22 mm Year of manufacture: 2004 Nodpoh Rawbefx Ahwewc Control unit: CC 200

Kondisi: baik (bekas), Vertical Turning Lathe SC33 CNC Produsen: TITAN (Rumania) Tahun Pembuatan: 1986 Nodpfow Eplasx Ahwewc Revisi total mesin pada tahun 2005 Data teknis utama: CNC Siemens 802D Diameter meja putar: 3000 mm Diameter pembubutan maks: 3300 mm Tinggi kerja maks: 3000 mm Berat benda kerja maks: 18000 kg Rentang kecepatan meja: 1,02-92 RPM Rentang kecepatan pemakanan: 0,05-5 mm/putaran Daya motor utama: 55 kW Dimensi keseluruhan: 5600 x 5300 x 5400 mm Berat: 47350 kg Mesin dalam kondisi teraliri listrik.

Tahun pembuatan: 2017, Kondisi: hampir baru (bekas), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine Ideal for operations without a power supply (e.g. roadside assistance service vehicles or mobile tyre service) This compressor is used, built in 2017, and has 50 operating hours. The robust, petrol-driven piston compressors offer you – in addition to the well-known RENNER system advantages – especially flexible compressed air supply on construction sites, in service vehicles, and many other applications 'off the grid'. They ensure a constant supply of compressed air, regardless of location. The small version is mobile and can be quickly relocated thanks to the ergonomic handle, while the larger version, due to its compact design, can be easily moved with a pallet jack or forklift and loaded onto vehicles. VE = Electric Start. Please note: Supplied without battery. Technical data: - Intake capacity: 550 l/min - Effective delivery: 400 l/min - Petrol engine: 3.6 kW Honda unit with 4.8 HP - Max. pressure: 10 bar - Cylinders/stages: 2/1 Nwodpod H Dr Ssfx Ahwsc - Speed: 1,400 rpm - Sound level: 98 dB(A) - Air receiver: 50 l - Dimensions (L x W x H): 810 x 460 x 830 mm - Weight: 70 kg Visit our showroom in Erlangen. We offer a large selection of new and used compressors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, kapasitas angkut: 5 kg, jangkauan lengan: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Njdpfoqgck Djx Ahwjwc Country of origin: Japan Year: 2007 Controller: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Kondisi: baru, berat keseluruhan: 2.600 kg,

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 923912978, Gasparin GI1111C K2 Mobile Impact Crusher on Crawler Tracks. Crushing plant with impact mill, especially suitable for the production of fine grain sizes. It is capable of achieving high production outputs of up to 360 t/h. It can be equipped with a recirculating screening system in a closed circuit, allowing for precise calibration of the final product. Praised for the excellent quality of the crushed material, it also delivers outstanding operational efficiency. Production output: approx. 360 TPH Proportional valve with load sensing for optimized system performance and a fuel consumption reduction of approx. 30%. Crusher gap hydraulically adjustable, even during crushing operations. Quick locking system with wedges and folding cylinders. Dust extraction system. Tank pump. Magnetic separator. 1-year warranty up to a maximum number of operating hours from the commissioning of the plant. Technical Data: Impact crusher type M x 800 mm Crusher gap from 30 to 130 mm Feed hopper 5 m³ – 2000 x 3970 mm Grizzly feeder 970 x 3600 mm Main conveyor 1000 x 11250 mm 4-cylinder diesel engine with constant speed, 82 HP/60 KW, emission stage V Control panel Track drive 450 x 3800 mm Weight: kg Transport length: 13,820 mm Transport width: 2,550 mm Transport height: 3,400 mm Further information: Intended use: Construction Unladen weight: kg Nwsdjhd I Udspfx Ahwec Overall condition: very good Technical condition: very good Optical condition: very good Transport dimensions (L x W x H): 13.8 x 2.55 x 3.40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, berat keseluruhan: 87 kg, kapasitas angkut: 6 kg, jangkauan lengan: 706 mm, KUKA 5-Axis Robot KR6 fivve Maximum reach: 706.7 mm Maximum payload: 6 kg Position repeatability (ISO 9283): ±0.03 mm Number of axes: 5 Mounting position: Floor-mounted Footprint: 320 mm x 320 mm Weight: approx. 48 kg Axis Data - Range of Motion: A1: ±170° A2: -190° / 22.6° A3: 5° / 156° Nwedpfxsqy E Rpo Ahwjc A4: - A5: -117.6° / 90° A6: ±350° Operating Conditions: Ambient temperature during operation: 5°C to 45°C (278 K to 318 K) Protection rating: IP54 (robot body), IP54 (wrist) Controller: KR C4 compact Teach pendant: KUKA smartPAD Included: - Schunk gripper, including connecting cables - Profinet, EtherCAT, X11 interfaces - Includes Murr MVP12 and IFM PQ7834 pressure sensor

Kondisi: baru, EN-ELMAG GBM 4/40 SGA TOUCH Gear-driven Column Drilling Machine Vario – stepless speed adjustment The models in the GBM SGA TOUCH series are the perfect option for all types of workshops, whether for maintenance purposes or production. These robust drilling machines are equipped with a touchscreen control display, which assists the operator in selecting optimal machining parameters. The spindle speed can be continuously adjusted, and the quill feed features a heavy-duty gear transmission. The clamping table can be motorized for height adjustment, simplifying the handling of heavy workpieces. These machines are ideal for single-part and small-series production, as well as for use in maintenance and steel or structural engineering. ADVANTAGES • Control panel with touchscreen and additional functions • Automatic feed with a robust gear transmission • Stepless speed adjustment • Motorized table height adjustment • Tilting and rotating worktable TECHNICAL DATA Njdpfx Aet Ed A Rjhwjwc Drilling capacity in steel: 40 mm Thread cutting capacity: M24 Spindle taper (rotary spindle): MT 4 Speed range: 60 – 2,600 rpm Speed settings: stepless Quill stroke: 190 mm Quill feed levels: 4 Column diameter: 140 mm Quill feed: 0.1/0.2/0.3/0.4 mm/rev T-slot width: 14 mm Table lift: 540 mm Spindle overhang: 340 mm Worktable tilting range: ± 50° Worktable rotating range: ± 50° Distance spindle to table: 595 mm Worktable surface: 540 x 440 mm Motor power: 2,000 W Power supply: 400 V / 50-60 Hz Overall dimensions (LxWxH): 880 x 640 x 2,230 mm Height (total): 2,230 mm Weight: 565 kg