Pusat penggilingan

Chiron FZ 12 KW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 320 mm, jarak gerak sumbu Z: 360 mm, beban meja: 500 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 5.000 g, jumlah sumbu: 3, This 3-axis vertical machining center CHIRON FZ 12 KW was manufactured in 2012. It is equipped with a high-speed spindle offering a maximum speed of 12,000 rpm, and rapid traverse speed of up to 60 m/min on the Z-axis. The machine features an automatic tool changer with 24 positions and can handle a table load of up to 500 kg. Ideally suited for precision machining tasks. Please contact us for more information about this machine. Machine Advantages Technical Machine Advantages • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12,000 rpm in 0.6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in St 60: Ø 16 mm • Tapping: M 16 • Milling capacity in St 60: 80 cm³/min • Acceleration: X & Y axis 0.7 g, Z axis 1.0 g Additional Information Movement Range and speed of axis movement: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Permissible load moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum speed J1: 195°/s J2: 175°/s Hnodpfx Alex Nr I Ejcsl J3: 180°/s J4 and J5: 400°/s J6: 600°/s Permissible load moment J4 and J5: 7.7 Nm J6: 9.8 Nm Tools Automatic tool changer: Tool pockets: 24 Tool change time: approx. 0.9 s Chip-to-chip time: approx. 2.4 s Workpieces are fed automatically through a loading system and are sequentially loaded into the Chiron machining centers by two Fanuc industrial robots. After completion of the machining processes, they are removed. The robots then transfer the components to a transfer system, which conveys them to a subsequent cleaning facility. The integrated wash line ensures reliable cleaning of the components according to defined cleanliness standards. After the washing process, two synchronously operating Fanuc robots pick up the cleaned parts in the rear section of the plant. Depending on process requirements, these are either automatically palletized or further processed in a subsequent step, for example by riveting. The entire system operates fully automatically.

Kondisi: bekas, Tahun pembuatan: 2003, de-to-hu-it-lt Hnjdpfx Aljvuun Tjcel

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die von Hand gezeigten Teile sind nicht enthalten. Technische Details siehe Abbildung. Hjdpfx Asrpn Dvjlcenl

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control system: Heidenhain Mill Plus V600 Machine weight: approx. 7000 kg 24,000 rpm 16x HSK63A tool changer 40 bar internal coolant supply 250 liter coolant tank Hnsdpjwgi Drefx Alcjl Chip conveyor

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Hedpfjcxxx Rex Alconl Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 3.900 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 610 mm, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 3.900 h, Kami menawarkan Hurco VMX30 HSi dalam kondisi sangat baik dengan spindle HSK-A63 dan putaran 18.000 RPM. Perjalanan sumbu X: 762mm Perjalanan sumbu Y: 508mm Perjalanan sumbu Z: 610mm Mesin dilengkapi dengan opsi berikut: Pendingin internal 20 bar Pengganti alat 40 posisi Spindle HSK-A63 18.000 RPM Skala linear Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Perangkat lunak Ultimotion Perangkat lunak optimasi pergantian alat Hnodpfox N E H Usx Alcol Catatan: Ragum tidak termasuk dalam penjualan mesin.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah alat 5 sumbu dalam kondisi sangat baik, dijual karena tidak terpakai! Hnodpjxw Sxkofx Alcjl

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Hnedpfslz Rvljx Alcol Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Bagian yang diperlihatkan dengan tangan tidak disertakan. Dengan mesin sudah termasuk dudukan alat SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 rpm. Heidenhain iTNC 530. Tempat penyimpanan alat 40 posisi, SK 40. Hjdpfslpcdwsx Alcsnl

Kondisi: bekas, Chiron FZ18W Magnum Rotary pallet Year: 1999 CNC Siemens 840D Travel: X 630 / Y 400 / Z 425 mm Tables (2): 850 x 450 mm 20 tools ISO 40 spindle / 18 kW / 140 Nm Rapid traverse: 40 m/min HAWE hydraulics Automatic doors Chip conveyor Weight: 6 tons Hodpfxshkkwbo Alcjnl Dimensions: 3.6 x 2.25 x 2.85 m The machine can be inspected under power at our warehouse Mimu Machine Tools (Italy)