Pusat pemesinan vertikal

CHIRON FZ 18 L

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 427-13, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 425 mm, tinggi total: 3.000 mm, panjang total: 4.000 mm, lebar total: 3.050 mm, berat keseluruhan: 6.700 kg, kecepatan spindel (maks.): 10.500 rpm, penjepit spindle: MK 4, Perlengkapan: dokumentasi / manual, fungsi hidrolik ketiga, Spindel utama telah diperbarui sekitar 700 jam yang lalu! Mesin dapat diuji di lokasi. PERALATAN: Sistem pendingin dan pendinginan internal Prjdpfx Aqjz A U Rweveb Konveyor serpihan Unit hidrolik Rentang gerakan sumbu X: 2.000 mm Rentang gerakan sumbu Y: 400 mm Rentang gerakan sumbu Z: 425 mm Panjang meja: 2.280 mm Lebar meja: 450 mm Kecepatan putar spindel: 10.500 RPM Jumlah perkakas: 20 Sistem kontrol: SIEMENS SINUMERIK 810 M

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6LUD00308, jarak pergerakan sumbu X: 620 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 460 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, daya nominal (semu): 45 kVA, torsi: 180 Nm, produsen pengendali: Siemens, model controller: Sinumerik 840D, tinggi benda kerja (maks.): 430 mm, diameter benda kerja (maks.): 580 mm, berat benda kerja (maks.): 300 kg, tinggi total: 3.300 mm, panjang total: 3.225 mm, lebar total: 2.256 mm, beban meja: 300 kg, diameter meja putar: 500 mm, berat keseluruhan: 8.500 kg, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 40 h, pasokan pendingin: 42 batang, jarak dari tengah meja ke hidung spindel: 150 mm, daya motor spindle: 3.400 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, panjang alat: 250 mm, diameter alat: 127 mm, berat alat: 7.000 g, suplai pendingin melalui spindel: 42 batang, sudut putar sumbu B (min.): -50 °, sudut putar sumbu B (maks.): 110 °, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, 1 Prjdpjzdf Hvjfx Aqvjb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It offers an X-axis travel of 1270 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and features a chip conveyor, a coolant filtration system, and a fourth axis drive. If you are looking for high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center that we are offering for sale. Please contact us for further details. • Spindle nose to table (max): 742 mm • Spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes Prsdpfxeza A Eno Aqveb • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • Fourth axis drive and wiring: Included • Spindle air blast: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Work light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional Equipment • Chip conveyor: Auger type • HRT210 rotary table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility note: VF-4SS

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, TESA-MICROH-9633 Prodey Uvhyspfx Aqvsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 325 mm, lebar total: 185 mm, panjang total: 483 mm, berat keseluruhan: 16 kg, jenis pendinginan: air, sekring listrik: 16 A, arus pengelasan pada siklus tugas 100%: 175 A, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 250 A, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Set lengkap: Mesin las WIG LORCH T 250 DC Basic Plus dengan pendingin air WUK 7 dan aksesori Dijual sebuah mesin las industri profesional dari merek premium LORCH, tipe T 250 DC Basic Plus, yang dikombinasikan dengan unit pendingin sirkulasi air inovatif WUK 7. Sistem ini dirancang sebagai perangkat portabel serbaguna serta perangkat bengkel yang lengkap dan unggul dengan teknologi inverter mutakhir. Prjdjyxvwispfx Aqvob Produsen: LORCH (Dibuat di Jerman) Model: T250 DC Basic Plus termasuk pendingin air WUK 7 opsional Kondisi: sangat baik, berfungsi penuh Lokasi penyimpanan: Graz _____ Isi pengiriman (Set Lengkap): • Mesin las inverter WIG LORCH T 250 DC Basic Plus • Unit pendingin sirkulasi air LORCH WUK 7 (koneksi langsung LorchNET) • Obor las WIG termasuk paket selang • Kabel arde • Unit perawatan untuk gas / regulator tekanan Harga baru sekitar 6000 € _____ Sorotan: • Solusi satu kabel inovatif: Berkat koneksi unit pendingin modern, seluruh sistem (inverter + pendingin air) hanya membutuhkan satu kabel daya. Catu daya dan kontrol cerdas yang disesuaikan untuk WUK 7 dilakukan langsung melalui bagian belakang sumber daya las. Tidak ada kabel yang berantakan saat pemasangan! • Teknologi inverter kelas atas: Kapasitas las penuh 250 A dengan desain yang ringkas. • Fungsi FastPuls (hingga 2 kHz): Sempurna untuk pengelasan lembaran tipis tanpa distorsi. • Mobilitas yang kuat: Unit dasar yang sangat ringan (hanya 16 kg), ideal untuk penggunaan berat dalam pembuatan kendaraan, bengkel, serta pembuatan tangki dan pipa. _____ Data teknis: • Rentang daya: 5 – 250 A • Siklus kerja (ED) pada 40°C: 60% = 200 A / 100% = 175 A • Tegangan jaringan: 400 V (sekring jaringan 16 A) • Kapasitas pendinginan (WUK 7): 0,53 kW • Berat: sekitar 16 kg • Dimensi inverter las Lorch T 250 DC: 483 x 185 x 325 mm (P x L x T) • Dimensi unit pendingin sirkulasi air Lorch WUK 7: 547 x 212 x 265 mm (P x L x T) _____ Perangkat ini dalam kondisi siap digunakan. Pemeriksaan dan uji coba dapat dilakukan setelah perjanjian.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 2.450 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 12.001.400 mm, jarak gerak sumbu Z: 18.001.790 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 3.000 kg, tinggi total: 4.700 mm, panjang total: 12.700 mm, lebar total: 7.800 mm, diameter meja putar: 2.200 mm, kecepatan rotasi (maks.): 200 rpm, berat keseluruhan: 57.000 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 2.450 h, pasokan pendingin: 40 batang, jumlah slot dalam magazin alat: 60, panjang alat: 460 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, CNC control: Heidenhain iTNC 530 Predpfozb H Tfox Aqvob Axes Travel X-axis mm: 6000 Travel Y-axis mm: 1200/1400 Travel Z-axis mm: 1800 (H) / 1790 (V) C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: ±180° B-axis indexing degrees: ±180° Rapid traverse m/min: 30 Worktable Pallet dimensions mm: 6000 x 1235 NC milling/turning table: Pallet dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 Max. torque Nm: 4600 Spindle Max. spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/continuous) Spindle torque Nm: 382/278 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 With empty adjacent pockets mm: 200 With adjacent pockets occupied mm: 104 Max. tool length mm: 460 Max. tool weight kg: 25 Tool change time (chip-to-chip) sec: 9.8 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rinsing gun Operating mode 4 Blow air through spindle center selectable via M function Work area lighting DXF import function Paper band filter Automatic work area door Mounted indexing device for shaft machining Axes can be clamped hydraulically via M function (optional) Machine operating hours: Power-on hours: 29,447 Spindle operating hours: 2,450 Basic machine: Dimensions / Weight Length mm: 12,700 Width mm: 7,800 Height mm: 4,700 Weight kg: 57,000

Kondisi: bekas, Tahun pembuatan: 2008, WERKSTUECK_BESCHREIBUNG Prsdpex Dda Tefx Aqvsb

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm Prodpfsv Ig Avjx Aqvsb - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Pengontrol Heidenhain TNC 426 Rentang gerakan X/Y/Z: 1250 x 880 x 800 mm Kecepatan putar 8.000 putaran/menit Majalah perkakas untuk 60 perkakas, tipe SK 50 Kepala frais universal +0° / -90° Meja putar NC 1250 x 1000 mm Konveyor serpihan Pedpszqv A Tsfx Aqvsrb Probe pengukuran

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 435 h, tinggi total: 1.065 mm, lebar total: 645 mm, berat keseluruhan: 114 kg, jarak pergerakan sumbu X: 165 mm, panjang produk (maks.): 685 mm, jumlah sumbu: 3, Plastic 3D Printer, manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a ytterbium fiber laser and can produce parts up to a maximum size of 15.9 x 15.9 x 29.5 cm. If you are looking for high-quality 3D printing capabilities, you should consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build volume: 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in) • Layer thickness: 110 microns (0.004 in) • Build speed: 10 mm per hour (0.39 in/hour) • Laser type: Ytterbium fiber • Laser spot size: 200 microns (0.0079 in) • Material refresh rate: 30 to 50 percent • Hopper capacity: 8.5 kg PA12 nylon (18.7 lb) • Dimensions: 685 x 645 x 1065 mm • Maximum part size: 15.9 x 15.9 x 29.5 cm (6.3 x 6.3 x 11.6 in) • Minimum access dimensions: 125.5 x 149.5 x 187.0 cm (49.4 x 59.0 x 73.6 in) • Printer dimensions: 64.5 x 68.5 x 107 cm (165.5 cm with stand) • Weight: 114 kg • Warm-up time: 60 minutes • Operating environment: 18 to 28°C (68 to 82°F), ≤30% humidity • Internal temperature: 200°C (392°F) • Temperature control: Quartz tube heating elements, PTC cartridges • Air treatment: Pressure-controlled two-stage filtration, HEPA and carbon filters • Power requirements: EU 230 VAC 7.5A, US 120 VAC 15A • Galvanometer: Formlabs proprietary • Laser wavelength: 1065 nm • Laser power max: 10 watts • Beam divergence: 4.01 mrad • Laser class: Class 1 • Connectivity: WiFi 2.4 GHz, Ethernet 1000 Mbit, USB 2.0 • Touchscreen: 10.1" 1280 x 800 • Controller: Brand Formlabs • Note: The display is damaged, but this does not affect functionality Fuse Sift OPTIONAL: Fuse Sift (price upon request) • Fuse Sift dimensions: 99.1 × 61.0 × 188.8 cm (39.0 × 24.0 × 61.8 in) • Fuse Sift weight: 93 kg (without build chamber or powder) (205 lb) • Build chamber dimensions: 27.9 × 34.2 × 48.9 cm (11.0 × 13.5 × 19.3 in) • Build chamber weight: 11 kg (17.6 kg filled with 20% packed powder) (24.3 lb, 38.8 lb) • Build volume: 16.5 × 16.5 × 30.0 cm (6.5 × 6.5 × 11.8 in) • Fresh powder container capacity: 8.5 kg Nylon 12 (18.7 lb) • Waste powder hopper capacity: 9.1 kg Nylon 12 (20 lb) • Air filtration technology: replaceable HEPA filter • Operating environment: 18 to 26°C (68 to 80°F), ≤30% humidity • Air management: negative pressure hood with replaceable HEPA filter, independent ventilation system • Power requirements: EU 230 VAC 7.5A dedicated circuit, US 120 VAC 15A dedicated circuit • Power requirements for high-performance vacuum: EU 230 VAC 10A, US 120 VAC 20A Pedpjy Sy Nvefx Aqvjrb • Vacuum requirements: auxiliary vacuum with static-dissipative, grounded components • Noise emission: max. 76.5 dB