Mesin cetak bantalan

ColorPrint CP

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 9, Case Press and Joint Setting Machine Schmedt PräForm HHS 20 Year of manufacture: 02/1981 – Serial No.: 09 Book height: 100 – 520 mm Block width: 120 – 400 mm Block thickness: 8 – 100 mm Output: approx. 150 cycles/hour Compressed air supply: 6 bar Electrical connection: 230 V / 50 Hz / 2.0 kW Online video inspection via Skype video available. We would be pleased to welcome your visit – more machines in stock. Available immediately – inspections possible. Nedsrmul Dopfx Abvjwd Located in Emskirchen/Nuremberg – testing possible on site.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Nwsdpog Ezarefx Abved Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, DMG MORI DMU 60 Evo 5-Axis Simultaneous Machining Center (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-Axis Simultaneous Year of manufacture: 2014 Condition: Good, used, fitted with new spindle in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h CNC control: Heidenhain ITNC 530 Condition: Used, operational Travel (X/Y/Z): 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20-14,000 rpm Tool magazine: 30 positions Tool holder: SK40 Nwjdpfx Absyubz Deved NC rotary tilt table: 600 x 500 mm Through-spindle coolant (IKZ): 40 bar with belt filter system Touch probe: TS649 Documentation included

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel 2000 mm Y-axis travel 620 mm Z-axis travel 520 mm Table size 2500 x 600 mm Max. workpiece weight 2000 kg Nodpfx Abeulnbkevswd Tool holder SK40 Control HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirement approx. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control - Tool magazine with 30 positions - Chip conveyor - Sieve filter system with high-pressure coolant (IKZ) - Operating manual Optional (on request): - Wireless probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Kondisi: baik (bekas), Tahun pembuatan: 2000, Perlengkapan: dokumentasi / manual, TORNADO COLCHESTER 200 LATHE Njdpfx Abjtuut Uovowd CNC FANUC GE Series SELF-CENTERING CHUCK DIAMETER: 250 mm TRAVELS: X: 215 mm Z: 400 mm TOOL MAGAZINE: 12 POSITIONS INCLUDES VARIOUS TOOLHOLDERS AND ASSORTED TOOLS BAR CAPACITY: 65 mm TAILSTOCK IN CYCLE CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, jumlah kartrid tinta: 4, MGI Meteor DP8700 XL Plus dengan iFoil dan feeder amplop, sangat jarang digunakan Nodpfjxcup Nsx Abvewd

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2014, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MTP87UK-0320, jumlah kartrid tinta: 4, panjang total: 5.020 mm, lebar total: 1.430 mm, tinggi total: 1.920 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 230 V, berat keseluruhan: 1.041 kg, konsumsi energi: 12 kWh, lebar produk (maks.): 330 mm, masa garansi: 1 bulan, Perlengkapan: dokumentasi / manual, dupleks otomatis, prosesor gambar raster, Specificații DP8700 XL • Dimensiune maximă format: 330 x 1.200 mm • Dimensiune minimă format: 100 x 148 mm • Suprafață maximă tipărire: 318 x 1.180 mm • Viteză de producție (coli/oră): 4.260 A4/Letter sau 2.280 A3/oră • Rezoluție imprimare: 95 până la 270 lpi – până la 3.600 dpi, 5 moduri stocastice presetate • Suporturi: - Hârtie: 65 până la 400 g/mp - Material plastic: 100 până la 400 microni - Plicuri: DL-C4 cu sau fără fereastră • Trei (2) tăvi de alimentare: 750 coli/tavă • Loader de mare capacitate: max. 3.000 coli • Stack-er de mare capacitate: până la 6.000 coli • Tavă bypass: capacitate 250 coli • Înregistrare precisă: +/- 0,2 mm Nwoder Eyx Repfx Abvsd • Duplex automat din două tăvi: până la 300 g/mp Workflow • Fiery Command Workstation RIP: Adobe PS3 - Compatibil JDF, management coadă tipărire, auto trap - Management culoare ICC/ICM, certificare Pantone “spot-on” - Calibrare automată integrată cu spectrodensitometru eye-one • Stație de lucru: Intel Pentium Dual Core - Management centralizat de joburi, previzualizări flexibile - Integrare coerentă a uneltelor • Date variabile: NEWLEAF, PrintSoft, Seagull Scientific Bartender, InDesign, Print Shop Mail • Bibliotecă substraturi: valori substrat stocabile

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Climaveneta chiller (water-cooled) Nwjdpof S A R Hsfx Abved Year of manufacture: 2008 Model: FOCS/LN 0751 Output: 70.1 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Tampoflex TF 150 E pad printing machine Cliché plate: 400x250mm Pad printing control Voltage: 230 V 50 Hz Nedpjh Rv Sijfx Abvowd Air: 4-6 bar Machine dimensions: 1200x1600x600 mm Weight: 240 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.600 kg, tinggi total: 2.780 mm, lebar total: 2.265 mm, panjang total: 2.110 mm, gores kuas bulu: 450 mm, panjang benda kerja (maks.): 1.220 mm, lebar benda kerja (maks.): 870 mm, tinggi benda kerja (maks.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, engineered specifically for demanding applications in tool and mold making. Thanks to its advanced control technology, excellent surface finish, and high efficiency, it offers an outstanding investment opportunity for businesses that prioritize precision and cost-effectiveness. Main Features & Benefits: ✅ Large working area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy via linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control system & automation: AC FORM HMI with intuitive touchscreen operation Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-position electrode changer for unattended operation Intelligent workpiece measurement & 3D correction Nwodpfxew Ebtvj Abved Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with minimal maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with the highest quality standards ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and efficient die-sinking EDM! 📌 Our used 2015 machine is cleaned, overhauled, and thoroughly tested prior to sale to ensure the highest level of quality and reliability.