Mengangkat truk dengan pemuat samping

Combilift MR4

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, kapasitas angkut: 4.500 kg, tinggi angkat: 6.000 mm, jenis bahan bakar: listrik, tipe tiang: triplex, panjang garpu: 1.200 mm, warna: kuning, bahan bakar: listrik, Brand: Combilift Rjdst Dpp Hopfx Ad Rsr Model: MR4 Year of manufacture: 2023 Load capacity: 4,500 kg Lift height: 6,000 mm Mast type: Triplex

Kondisi: baru, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dua sisi, Line for longitudinal joining with two milling machines. 6000 mm length press. The machine is new and has never been used. All corresponding tools are included with the machine. Rsdpfx Aswptnmjd Rjr

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 4.500 kg, tinggi angkat: 7.550 mm, jenis bahan bakar: listrik, tipe tiang: triplex, panjang garpu: 1.200 mm, warna: kuning, bahan bakar: listrik, Perlengkapan: kabin, Brand: Combilift Model: MR4 Year of manufacture: 2024 Capacity: 4,500 kg Rodpfx Aot Hflijd Rer Lifting height: 7,550 mm Mast type: Triplex

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jam operasional: 56 h, kapasitas angkut: 3.000 kg, tinggi angkat: 6.400 mm, jenis bahan bakar: listrik, tipe tiang: triplex, panjang garpu: 1.200 mm, warna: kuning, bahan bakar: listrik, Brand: Combilift Model: MR4 Year of manufacture: 2024 Capacity: 3,000 kg Lift height: 6,400 mm Rsdpfxet Hfmto Ad Rsr Mast type: Triplex

Kondisi: siap digunakan (bekas), Dijual: konveyor seperti terlihat pada foto dengan panjang sekitar 7,5 m. Lebar sabuk 0,3 m. Kemungkinan pengiriman tersedia. Redpsr Nvx Usfx Ad Ror

Kondisi: baru, Table width 3000 mm Table length 1500 mm Number of torch heads 1 CNC control system Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shutdown in case of collision * Machine installation or relocation via plug & play with forklift, pallet truck, or crane * 3-sided access to the cutting area thanks to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. Oxy-fuel cutting technology is required for cutting workpieces up to 150 mm. The workpiece support frame is equipped with interchangeable flat steel slats, 3 mm thick, mounted at a 45° angle. The spacing between the slats is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and underwater * Recommended cutting range: 0.5 to 40 mm * Maximum piercing thickness 30 mm, higher with ProPierce Technology * Marking, notching, and center punching also on coated metal materials * Inverter power source with digitally controlled, fully electronic process sequence * Integrated cooling system with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: Integrated CAD/CAM module in the machine control system TEKA EcoCube 5.5 kW Extraction Unit: Filtering medium: dry, grease-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Current type: 3Ph+N+PE Fan installation: integrated in the system, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Suction nozzle: NW 250 mm via suction duct, left side Redopm U U Njpfx Ad Ror Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm Equipment color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special Equipment: - Closure hooks and toggle latches - Compressed air connection and condensate drain, each fitted with bulkhead fitting - Compressed air connection with hose nozzle d=8mm - System equipped with grounding studs - Cables in UL version - EATON frequency inverter mounted on the left in the control cabinet

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Rodjnl Nqqspfx Ad Rsr

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Rsdpeu Nlkxefx Ad Rsr

Kondisi: hampir baru (bekas), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Rjdjg Snt Sopfx Ad Rsr Drive: 22 kW / 1,470 rpm

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This state-of-the-art CNC-controlled notching system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location in the machine using a pulling gripper carriage along the roller conveyor. A robotic arm fitted with cutting units (oxy-fuel or plasma) performs the cuts or notching operations at the selected position. The cut or notched, finished components either drop into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: Rodpfstwm Ubox Ad Ror This Ficep Flex FRC 1201 beam notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD serves as the plasma power source, suitable for material thicknesses up to 32 mm. Thicker material sections or phase cuts over 32 mm are handled by the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain-drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. The profiles are then moved into the machine on a sturdy roller conveyor with a gripper carriage. The system is designed for profiles up to 12 m long and therefore features 12 m roller conveyors on both the infeed and outfeed sides, each with a roller conveyor width of 1,300 mm. For removal of finished parts on the outfeed side, there are four chain-drag transverse conveyors each 6,450 mm long located after the notching system. Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC controller from Mitrol. The reliable CNC control unit is produced by Ficep's in-house supplier Mitrol and operates with Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit: The extraction filter unit is from Donaldson Torit DCE. Safety: Perimeter fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.