Meja penghalus logam

CORMAK DT1500M

Kondisi: bekas, Tahun pembuatan: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been regularly maintained Machine equipped with: - Sidel elevator for preforms to unwinder Nsdpfxsrkgy Ue Abvekw - Sidel preform unscrambler & feed system - Sidel oven & blowing station for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop Nksdpfxed Du T Io Abvsw • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Kondisi: baru, Delivery pressure: 11 bar Intake capacity: 480 cm³ Volume flow: 360 Tank capacity: 270 l / bar Nksdpfxovkizgj Abvjw Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW V / kW Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical details of the system: - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) The crane is disassembled and available immediately. Njdpfjpiarnox Abvekw Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.

Tahun pembuatan: 2017, Kondisi: hampir baru (bekas), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine Ideal for operations without a power supply (e.g. roadside assistance service vehicles or mobile tyre service) This compressor is used, built in 2017, and has 50 operating hours. The robust, petrol-driven piston compressors offer you – in addition to the well-known RENNER system advantages – especially flexible compressed air supply on construction sites, in service vehicles, and many other applications 'off the grid'. They ensure a constant supply of compressed air, regardless of location. The small version is mobile and can be quickly relocated thanks to the ergonomic handle, while the larger version, due to its compact design, can be easily moved with a pallet jack or forklift and loaded onto vehicles. VE = Electric Start. Please note: Supplied without battery. Technical data: - Intake capacity: 550 l/min - Effective delivery: 400 l/min - Petrol engine: 3.6 kW Honda unit with 4.8 HP - Max. pressure: 10 bar - Cylinders/stages: 2/1 - Speed: 1,400 rpm - Sound level: 98 dB(A) - Air receiver: 50 l - Dimensions (L x W x H): 810 x 460 x 830 mm - Weight: 70 kg Nkedpfsd H Dr Sjx Abvjw Visit our showroom in Erlangen. We offer a large selection of new and used compressors.

Kondisi: baru, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60–4200 rpm - Solid construction made from high-quality Meehanite cast iron - High concentricity accuracy thanks to tapered roller bearings; measured runout in the quill less than 0.01 mm - Infinitely variable speed control - Forward/reverse for thread cutting Nkjdpfod H Hhzjx Abvjw - X and Z axes with adjustable 55° dovetail guides - Y-axis with flat guideways - Drilling/milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step 0.04–0.15 mm/rev - Motorized feed in X, Y, and Z axes - Precision micro-feed - Milling spindle with precision bearing - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety screen with microswitch for maximum operator protection against flying chips and parts - Large, heavy-duty cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity 300 kg - Large travel distances: X / Y / Z axis: 740 mm / 330 mm / 320 mm Dimensions and Weights Length: 2400 mm Width/Depth: 2160 mm Height: 2300 mm Weight: 1200 kg Drilling/Milling Capacity Max. face mill size: 76 mm Max. shank-type end mill: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Connection Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Power type: AC Mains frequency: 50 Hz Milling Table (Horizontal) Length: 254 mm Width: 1370 mm Vertical spindle to milling table max.: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal Spindle Overhang: 0–420 mm Coolant System Coolant pump drive power: 90 W Motors Vertical spindle power (standard operation): 2.2 kW Standards and Approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical Spindle Overhang: 0–420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60–4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Swivel range, milling head X–Y plane: 90° Swivel range, milling head Z–X plane: 45° Quill diameter: 86 mm Quill travel: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel (Z-axis): 470 mm PU: 1

Kondisi: baru, Tahun pembuatan: 2026, Circular saw with table, right-side table extension, and straight and mitre fence. This machine incorporates many solutions usually found in more expensive units of this class. An excellent price-to-performance ratio has been achieved without any compromise on quality or versatility. Machine description The innovative circular saw combines strength, precision, versatility, and compact design. It is specifically created for small carpentry workshops, furniture manufacturers, and craftsmen. The machine features many technical solutions typically reserved for higher-priced equipment, delivering outstanding performance at a competitive price without compromising quality or multifunctionality. Included with the machine: carbide-tipped saw blade 250 x 30 x 2 mm Maximum blade/center bore diameter: 254 x 30 mm Blade speed: 4000 rpm Blade tilt range: 90 – 45° Maximum cutting depth at 45º: 65 mm Maximum cutting depth at 90º: 80 mm Cutting width with table extension: 750 mm Njdpfxjvxhi Ee Abvokw Maximum cutting length: 1000 mm Dust extraction port: 100/25 mm Working table dimensions: 635 x 420 mm Working table dimensions with extension: 635 x 1500 mm Motor power: 2.2 kW (S1) 400V / 3.1 kW (S6) Weight: 110 kg Overall dimensions: 1450 x 1000 x 1100 mm Manufacturer: Cormak

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller Nedpfx Abjvu Hgbevokw 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 330 kg, jenis bahan bakar: diesel, kapasitas tangki: 34 l, warna: hitam, arus keluaran: 65 A, tegangan keluaran: 230 V, frekuensi keluaran: 50 Hz, daya nominal: 12 kW (16,32 hp), daya kontinu: 10 kW (13,60 hp), panjang total: 930 mm, lebar total: 660 mm, tinggi total: 900 mm, kecepatan rotasi (maks.): 3.000 rpm, jenis pendinginan: air,

Kondisi: baru, Tahun pembuatan: 2025, Yanigav Earth Auger TAMD245 • Simple three-point linkage • Very robust, welded, machine-manufactured chassis • Versatile, high-performance gearbox suitable for 30 to 90 HP • Compatible augers from 10 cm to 80 cm diameter and up to 1.80 m length • 1.30 m offset on each side of the axis Nedsr Ezniepfx Abvskw • Chassis length: 245 cm • Drill not included