Kompresor sekrup

CORMAK THEOR 30 - 10bar INVERTER

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, tekanan: 13 batang, 1 used steam boiler ----- Manufacturer : LOOS Gunzenhausen Model : U-HD 1250 Heating surface approx.: 20 sq m Max. boiler output : 1,250 kg/h Operating overpressure: 13.0 bar Increased test pressure: 24.05 bar Ledpfxsuugi Se Aahsta Water content at NW, approx.: 993 l Total water content, approx.: 1,365 l Year of manufacture : 2003 CE mark : 0036 Equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings. Economizer: Eco 3, 82 kW, 31 bar, 238°C, 28 ltrs.

Kondisi: baru, Tahun pembuatan: 2025, EN: ATTENTION: POSSIBILITY TO CONFIGURE ANY CRANE SETUP – from 500 kg lifting capacity up to 10 tons. Any dimensions available. Thank you for your interest in our offer. WNM Sp. z o.o. offers: gantry cranes, semi-gantry cranes, jib cranes, pillar cranes, overhead suspension cranes, and overhead travelling cranes. A VAT invoice is issued for all machines. If you have any questions, please do not hesitate to contact us. DE: ACHTUNG: INDIVIDUELLE KRAN-KONFIGURATIONEN MÖGLICH – von 500 kg Tragkraft bis zu 10 Tonnen. Beliebige Abmessungen möglich. Vielen Dank für Ihr Interesse an unserem Angebot. WNM Sp. z o.o. bietet: Portalkrane, Halbportalkrane, Schwenkkrane, Säulenkrane, Hängebrückenkrane und Laufkrane an. Für alle Maschinen wird eine Mehrwertsteuerrechnung ausgestellt. Ltodpsv Ni Iksfx Aahja Für Rückfragen stehen wir Ihnen gerne zur Verfügung.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Kaeser screw compressors - various models Ledpfjqcu Rcox Aahsta

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min Ljdpsv Szt Dsfx Aahota End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: sangat baik (bekas), 90 running meters pallet racking Stow Used equipment, very good condition, see pictures Height: 6 m Ltodpfx Aoiwkn Rjahja Depth: 100 cm Beam length: 2.70 m Load capacity/shelf: 3,000 kg Frames in blue Beams in orange Asking price: €8,650.-- net ex stock Offer includes: + 33 pcs. pre-assembled frames, 12t bay load, depth 100 cm, height 6 m + 192 pcs. beams, length 2.7 m, 3,000 kg load capacity/shelf + 384 pcs. safety clips + 132 pcs. concrete anchors + Load capacity sign Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Constant stock of over 5,000 running meters of pallet racking from numerous manufacturers. (Technical data, specifications, and prices are subject to change and errors, as well as prior sale! Please refer to our terms and conditions. All prices are ex VAT, ex stock.) Buying / Selling: We are continuously looking for and offering a wide range of articles from various sectors broom-clean business clearances business liquidations fast - flexible - efficient! We also clear out and/or dispose of goods for insolvency administrators. Contact us with a few keywords and we will get back to you promptly. Click on our logo to visit our website!

Tahun pembuatan: 1997, Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner rounding, and double scraper units. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for simple operation, allowing storage of up to 12 programs. Edge thickness (roll): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise reduction hood Extendable workpiece support, special version extendable up to 950 mm Extraction connection: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet, two glue pots included (one has been used for EVA adhesive, one for PU adhesive; the PU glue pot is nearly new and was only purchased for a specific job). Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Joint milling unit with Leitz Whispercut DIA cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure zone with 4 rollers End trimming saw Integrated edge scrap container Combination milling unit R2 with pneumatic switching for thin and thick edges Ltsdpfxotpn Ets Aahja Corner rounding unit R2, pneumatically adjustable for thin and thick edges The contour milling unit can also be used in shelf program mode, i.e., only the straight edge is rounded, not the corners. Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood interlock CE marking Operating manual A video of the running machine can be sent upon request. All turn plates for the milling and scraper units have been renewed or rotated; saws have been sharpened. The machine is ready for immediate use. Only the joint DIA cutters (Whispercut) have not been renewed but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot on), and the frequency inverters have only been powered for approx. 455 hours. The machine is in very good condition; see original photos. Machine dimensions (LxWxH): approx. 5000 x 1400 x 1550 mm Weight: approx. 1550 kg The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this seller.”

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Ltodod Du T Iopfx Aahsa Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Kondisi: bekas, Tahun pembuatan: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software Panel thickness: 8 - 60 mm PVC/ABS edge thickness: 3 mm Lodpfxjvqbh Ee Aahota Feed speed: up to 25 m/min (20 m/min with corner rounding) Electronically adjustable working height via CNC Motorized, rubber-coated pressure belt with superior hold Panel support guide and facilitation for introducing small panels Monitored infeed guide Anti-adhesive unit Rectifier unit with two motors, each 3 kW, 9000 rpm ball bearings Glue application system for PUR adhesive with pre-melter and adhesive tank Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC Trimming unit with 2 motors (automatic tilt adjustment?) Overlap cutting unit with 2 motors Corner rounding unit with 2 multifunctional motors (trimmer + corner rounder) with CNC control Edge scraper unit Glue scraper unit Buffing unit Anti-adhesive unit TECHNICAL DETAILS MUST BE VERIFIED

Kondisi: baru, Tahun pembuatan: 2025, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, OPERATING WITH FULL INTERPOLATION ON EACH X, Y, Z AXIS. The machine comes with an "Innovation Opinion," simplifying the process of securing EU funding for your purchase. This high-class CNC milling machine is intended for subtractive material processing. Thanks to a wide range of configurations, it finds applications in various industries: industrial manufacturing, electronics, welding, woodworking, advertising, and more. These are efficient and precise machines equipped with user-friendly CNC control systems, allowing both experienced and novice operators to handle them with ease. Training is included with every machine purchase—at our facility! MACHINE AVAILABLE IMMEDIATELY! Technical Specifications: - Spindle: 5.5kW / 18,000 rpm, inverter, air-cooled - Working area: 2100x3100 mm (up to 2680 x 3600 mm) - Maximum spindle height: 350 mm - Control: DSP - Software resolution: 0.001 mm - Software: INCLUDED - Power supply: 400V - Weight: 1450 kg - Machine dimensions: 2680 x 3600 x 2200 mm - Table height: 715 mm - Vacuum pump: 7.5 kW - Vacuum: 440 mbar - Linear guides - Drive transmission: rack-and-pinion (Z axis: ball screw) - Axis drives: hybrid servo drives NOTE! The machine is equipped with a memory function for the last G-code path. In the event of a failure or power outage, it resumes work from the last point without loss of time or material. Optional Equipment: - Vacuum pump: Becker KVT 3.140, 129 m3/h Top-class safety barriers: - Highest quality light curtain safety barriers available as an option. - The safety zone defined by sensors prevents entry into the machine’s working area. - The complete barrier set ensures operator safety. - gantry height in Z-axis up to 450 mm - UCANCAM V11 software (allows file import from Corel, AutoCAD). File import/export, editor, and text input enabled. - Tool kit: milling cutters, drills, holders Lodpfx Aaog Ngixohota *Unloading and positioning of the machine is at the client’s expense. Standard Equipment: - Premium air-cooled spindle - Hybrid servo drives - Raised gantry in Z-axis to 350 mm - Vacuum table – 4 independent vacuum zones + T-slot table for manual material clamping (holders included) - 5.5kW vacuum pump included - Tool measurement sensor included - Software package included - Tools, collet set, leveling feet, and other accessories - DSP control – digital data processing - Machine equipped with last G-code path memory – in case of failure or power interruption, operation resumes at the last point without loss of time or material. The listed price is NET (excluding VAT). The price does not include delivery costs. For further information, please contact us by phone or email. We invite you to explore our full offer on our website.