2550x25 mm - 4 silinder hidrolik atas

CRONOSSTECH SHSB 4R 25-350

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts Cgedpohzbipjfx Aa Tjp - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baru, Tahun pembuatan: 2025, de Cgsdjhv U U Djpfx Aa Tsp

Kondisi: baru, Tahun pembuatan: 2025, PROD-MASZ is a machine manufacturer introducing an entirely new level of equipment quality. We take personal responsibility for every stage of production of our offered products, ensuring the highest standards and manufacturing quality. Our many years of experience enable us to develop durable, reliable, and user-friendly machines. We place particular emphasis on functionality, comfort, and ergonomic working conditions for the operator, which has made us a market leader both domestically and internationally. Model: ZGR-3140/1.0 - Maximum working width: 3140 mm Cedocntnkopfx Aa Tegp - Bending capacity: up to 1.0 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 20 mm - Cutting with rotary shear across the entire working width - Upper beam can be raised to three positions - Clearance opening: 80 mm - Degree scale - Angle stop - Depth stops - Weight: approx. 560 kg - Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) + €350 - The machine complies with CE regulations and comes with a 12-month warranty. Delivery costs to Germany: €360.00 Delivery costs to Austria: €360.00 Delivery time: 2-4 days Payment in cash upon delivery We look forward to your inquiry!

Kondisi: baru, Tahun pembuatan: 2025, PROD-MASZ is a machinery manufacturer introducing an entirely new standard of equipment quality. We take personal responsibility for every phase of production of our products, which guarantees the highest standards and quality of workmanship. Our many years of experience enable us to develop durable, reliable, and user-friendly machines. We place particular emphasis on functionality, user comfort, and ergonomic working conditions, thanks to which we are a market leader both domestically and internationally. Those who know us are aware that we are a trustworthy company :) BENDING MACHINE 2.14 m / 1.2 mm Technical specifications: - Maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - Upper beam opens in three positions Codpfxscntllj Aa Tsgp - Gas springs - Free passage: 80 mm - Degree scale - Angle stop - Rear support for sheet holding - Front depth stops - Approximate weight: 290 kg - The machine complies with CE standards and comes with a 12-month warranty. Roller shear 0.8 mm available for an additional 350 euros Price: €1,550 Shipping costs: €180 throughout Germany Delivery – weekly Cash payment on delivery We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT as applicable.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1990, nomor mesin/kendaraan: 4ROLL, diameter roller (bawah): 470 mm, diameter rol atas: 470 mm, diameter roll samping: 420 mm, diameter rol: 470 mm, panjang rol: 3.050 mm, lebar kerja: 3.050 mm, tinggi kerja: 1.800 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 45 mm, tebal plat aluminium (maks.): 45 mm, ketebalan pelat tembaga (maks.): 45 mm, berat keseluruhan: 43.000 kg, panjang total: 7.700 mm, lebar total: 2.410 mm, tinggi total: 2.470 mm, daya: 37 kW (50,31 hp), tegangan masuk: 380 V, jenis arus masuk: tiga fasa, panjang kerja: 3.050 mm, Perlengkapan: dokumentasi / manual, henti darurat, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 DESCRIPTION: Four-roll hydraulic plate bending machine with linear guideways and double pinch pre-bending capability. Machine is in good working condition. BENDING CAPACITY: - Plate width: 3,000 mm - Maximum rolling thickness: 40 mm - Pre-bend thickness: 35 mm ROLL DIMENSIONS: - Useful length: 3,050 mm - Diameter of central rolls (upper/lower): 470 mm - Diameter of side rolls (left/right): 420 mm FEATURES: • Surface hardened 4 rolls for increased strength and durability • Three driven rolls powered by separate hydraulic motors with gearboxes • Conical bending device: side rolls tiltable for cone bending, equipped with contrast pad roller • Hydraulic front drop-end for easy removal of finished shells • Variable working speed for the roll bending, with fast/slow hydraulic rotation • Mobile electric control console on wheels, with centralized commands, joysticks, and 3 digital position readouts Cgedpfxowb Scmj Aa Top • Digital readout for precise positioning and repeatability of bending and pre-bending operations • Hydraulic oil tank capacity: 350 liters; electric power: 37 kW; voltage: 380V / 50 Hz • Machine dimensions: 7,700 x 2,410 x H 2,470 mm; weight: 43,000 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 804, panjang rol: 2.550 mm, lebar kerja: 2.500 mm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, berat keseluruhan: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Cgedpfx Aevxbm Roa Tsp Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair platform can be purchased to go with the machine.

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Cgedjgyy I Aopfx Aa Tsp Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel, X-axis: 350 mm Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 2.000 mm, diameter pembubutan: 570 mm, lubang spindel: 83 mm, Weiler Voest Alpine E50 Drehmaschine Inklusive 3-Backenfutter und 6 Multifix-Werkzeughaltern Cgedjn Hp T Ajpfx Aa Top

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Portal-type straightening press with 400 T capacity Oil-hydraulic double-column press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000 x 3000 mm d) Daylight (open height) 1500 mm e) Overall dimensions approx. L x W x H 6000 x 5000 x 4500 mm f) Oil temperature display on reservoir g) Lubrication via grease nipples Cjdpfx Aaehyc Nwo Tegp h) Table in grid (raster) construction i) Controls mounted on swing arm attached to the bridge j) Pressure adjustment from 60 T to 400 T via MONITOR k) Bridge traverses via two gear motors, operated by rack and pinion l) Cylinder moves left and right via rack and pinion m) Machine frame powder-coated and/or double-painted n) T-slots as per customer specification o) Cylinder induction-hardened GANTRY PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 sides Forces Maximum pressing force: 4000 kN Maximum stripping force: 600 kN Pressure build-up time (closed die, steel-on-steel): max. 3 sec Dimensions Maximum opening width: 1500 mm Stroke and minimum opening: 1500 mm / 0 mm Table height above floor: approx. 900 mm Total height above floor (installation height): approx. 4500 mm Minimum hall height: 5500 mm Deflection Measured at max. closing force with 70% load:

Kondisi: seperti baru (mesin pameran), CNC ultra-high pressure waterjet cutting system SAME / Bogacki - 2515 BA 2D - Demonstration machine - Travel distances: 2,550 x 1,550 x 200 mm Control: BOSCH MTX Aquacut edition - CAD / CAM system - Operator PC with portable electronic handwheel Includes high-pressure pump HB 50 Includes stainless steel work table (2,700 x 1,700 mm) Includes CE-compliant safety equipment (light barriers) Includes splash guard (see images) Includes abrasive container (250 kg) Cjdsgq Nqbepfx Aa Tegp Includes Allfi abrasive cutting head Includes red light laser Includes drilling unit, 4 mm diameter, ER 16 chuck - Very few operating hours