4100×16 mm - 4 silinder hidrolik kelompok

CRONOSSTECH SHSB 4R 40-380

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH Gedpfx Aded Ab H Hegstt • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baik (bekas), Data teknis: Panjang kerja: 2050 mm maks. kapasitas pelipatan: 18,0 mm Gedpfx Aexruvzedgjtt Pembengkokan akhir: 12,0 mm Diameter rol atas: 280 mm Diameter rol bawah: 280 mm Perangkat pelipatan kerucut bantalan lipat hidraulis Daya motor: 7,5 kW Dimensi (Panjang x Lebar x Tinggi): sekitar 3650 x 1550 x 1650 mm Berat: sekitar 7,5 ton Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Kondisi mesin, teknik, dan keausan sesuai dengan usianya; mesin bekas dijual tanpa jaminan apa pun.

Kondisi: bekas, Tahun pembuatan: 1994, panjang total: 6.300 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, 4zqwbqw67npg7z3v Gtsdpfx Asxyklnedgst

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 30 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload Gjdpfow Sl T Sex Adgstt * The upper and side rolls are driven by a hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read with three digital indicators * Easy removal of bent parts thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Rolling: 25/30 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) Gedoxw Ecvjpfx Adgett * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baru, Sheet length: 2100 mm Upper roll diameter: 140 mm Sheet thickness: 4 mm Lower roll diameter: 140 mm Length: 4000 mm Height: 1040 mm Width: 1140 mm Approx. weight: 2240 kg Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: Central support: €6,479 Side supports: €4,055 CNC control: €8,670 Material feed table: €3,258 Gedpfx Adowhtdfjgstt Variable speed control: €4,109 Automatic material discharge PLC control CNC control Automatic material loading system Interchangeable top roll Adjustable lower roll support system (customizable to customer requirements) We have numerous references!

Kondisi: baru, Sheet width: 3100 mm Sheet thickness: 13.0 mm Bending capacity: 10.0 mm Top roll diameter: 300 mm Side roll diameter: 210 mm Bottom roll diameter: 270 mm Total power requirement: 11.0 kW Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top and bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position display for both side rolls - Mobile control panel - 2x selectable bending speeds - Hydraulic tilting bearing - Safety device (safety cord with switch unit) - Manometer / pressure gauge for the rolls - CE marking + Declaration of Conformity Gtjdpexabflefx Adgst - Operating manual

Kondisi: baru, Sheet width 2600 mm Sheet thickness 10.0 mm Bending capacity 8.0 mm Gedpfxoxaalqj Adgott Top roll diameter 230 mm Side roll diameter 190 mm Lower roll diameter 210 mm Total power requirement 7.5 kW Machine weight approx. 5,560 kg Dimensions (L x W x H): 4,650 x 1,380 x 1,300 mm Features: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Including alignment function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rolls - Mobile control console - 2 selectable bending speeds - Hydraulic drop-end - Safety equipment (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark + declaration of conformity - Operating manual

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending round and various diameter materials Bottom and side rolls move vertically via direct hydraulic linear motion Protected against overload Top roll powered by electric motor and planetary gearbox. Bottom roll powered via cardan coupling system. Two rolls are driven Roll positions are easily readable with three digital displays Rolled parts can be easily removed thanks to the hydraulically operated drop-end Very easy to operate with mobile control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel roll movement Conforms to EU safety standards and CE marked User manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) support for large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Discharge/extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Gedpfx Asw Slkkodgjtt Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg