Sistem lengan pengait

DAF CF 450+E6+INTARDER

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: Knedjyidvdspfx Ai Iob - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Tahun pembuatan: 1993, 610cae60-d4cd-4390-8b48-41f7cbf6147d Knjdpju Rni Hsfx Ai Ieb

Kondisi: baik (bekas), Flat-die thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat-die thread rolling & knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW, 1435/2890 rpm Kodpsi Eg Nkofx Ai Ijnb -Belt drive: 3-stage adjustable -Knurling plate: RAA 1.0 -Central lubrication -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Max. throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame stand, level valve, inspection shaft, and documentation. Knsdpeh Akm Tefx Ai Ijb

Tahun pembuatan: 2017, Kondisi: bekas, General Information Mileage: 99,451 km Application: Site Management Technical Information Power: 110 kW (150 hp) Fuel type: Diesel Weights Unladen weight: 1,600 kg Payload: 2,145 kg Gross vehicle weight: 3,745 kg Environment Emission class: Euro 6 Condition General condition: Good Technical condition: Good Ksdpfx Ajzh Uyxoi Isnb Optical condition: Good Further Information Please contact Christian Theißen for further details. Manufacturer: Audi Model: Audi A4 Avant / Command Vehicle, Estate Year of manufacture: 2017 Type: Used Details: First registration: 07/2017 Fuel type: Diesel Mileage: 99,451 KM Transmission: Automatic Engine power/displacement: 110 kW / 1,968 cm³ Permissible total weight: 2,145 kg Curb weight: 1,600 kg Length: 4,726 mm Width: 1,842 mm Height: 1,393 mm Environmental badge: Green / Euro 6 Colour: White Features: Daytime running lights, automatic climate control, 5 seats, airbags, electric windows and mirrors, central locking, ABS, ESP, radio, power steering Note: Special equipment includes removable blue beacon and emergency siren in accordance with § 52 (3) StVZO, hands-free phone system Location: 41468 Neuss Immediately available

Kondisi: sangat baik (bekas), jarak tempuh: 252.000 km, pendaftaran pertama: 07/2015, jenis bahan bakar: diesel, konfigurasi gandar: 8x2, bahan bakar: diesel, rem: pengereman mesin, warna: merah, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, panjang ruang muatan: 6.100 mm, Tahun pembuatan: 2015, jam operasional: 2.708 h, Perlengkapan: ABS, derek, kendali jelajah, kopling trailer, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik,

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran), Rundbogen-Industriezelt, Marke SUIHE, neu, Modell: XL-308515R, Baujahr 2016 Abmessungen: Breite 9,15 m x Länge 26 m x Höhe 4,57 m Konstruktion: Verzinkte Stahlkonstruktion, Rohrdurchmesser Φ60*1,8 mm und Φ40*1,5 mm, gefertigt aus Q215 Stahlrohren gemäß GB/T700-2006 Standard. Planen: PVC-Material, Dicke 300g PE, doppellagig mit PVC beschichtet, Standardfarben ab Werk: grün oder weiß. Zugangstürtyp: Einfache mechanische Tür Türmaße: 3,5 m x 3,5 m Schneelast: 2,28 kpa (Druckspannung bei Verformung) Windlast: 80 km/h Reguläre Nutzungsdauer: Über 15 Jahre Einsatzbereiche: Industrie, Landwirtschaft, Materiallager, Fahrzeuglagerung, Hangar Erhöhte Widerstandsfähigkeit, einfache Montage und Demontage, hohe Kapazität, ausgezeichnete Stabilität. Planenfarbe: grün mit weiß. Modellmaße in Meter: XL-308515R 9,15*26*4,59 (B*L*H (m)), 300g PE Knsdpfx Aei Hc Drsi Isb Metallbox-Verpackung Transportbox-Außenmaße: 2,95 m * 0,75 m * 1,18 m Zeltgewicht: 1300 kg Verwendungszwecke SUIHE Industriezelt: 1. Landwirtschaft: Tierunterstand und Heulager 2. Luftfahrt: Flugzeughangar 3. Maschinen-, Geräteeinlagerung, temporäre Halle 4. Schifffahrt: Schiffslagerung, Container 5. Garage für Fahrzeuge etc. PREIS: 8.500 Euro + MwSt., verhandelbar, FCA Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Deutsch. / We speak English. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, 1 unit ketel uap bekas ----- - dengan pipa api bergelombang dan dasar berbibir - Pabrikan: STANDARD Luas pemanas sekitar: 240 m² Kapasitas: 13,4 t/jam Tekanan operasi maksim: 14,0 bar Tekanan uji: 18,2 bar Isi air sekitar: 18.160 l Tahun produksi: 1988 Ksdpfx Aextndnji Ionb Dilengkapi dengan burner gas alam Saacke tipe DG 80, rangkaian pengatur gas, panel kontrol, pompa air umpan, dan fitting kasar dan halus yang tersedia.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT Kedpfx Aisw U N Ixj Ijnb - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: bekas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, but part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Performance at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Knedpfx Ajfupadei Ijb Power supply: 400 Volt, 50 Hz Power: 3 kW - 9-stage pump construction - Made of stainless steel 1.4401 - The pump is as new and was used as a parts donor, but includes several new pump chambers - Part of the magnetic coupling is missing Suitable for drinking water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg As new condition Not a submersible or immersion pump.