Garis potong-ke-panjang

Dahlstrom 60″ x .135″ x 20,000Lb

Tahun pembuatan: 2004, Kondisi: baik (bekas), Atlas Copco XAS 67 compressor Nwjdpsiywpzefx Afvjk 3.7 m³/min Hours: 2,371 h Deutz engine Type: diesel

Kondisi: bekas, Tahun pembuatan: 1991, Drilling capacity in steel (diameter): 50 mm Throat depth: 1100 mm Workpiece height – max.: approx. 1000 mm Drilling capacity in cast iron: 60 mm Nsdpfsu Sblwox Afvjwk Spindle taper: MT 5 Spindle speeds: 28 – 2500 rpm Feeds: 0.05 – 2 mm/rev Quill stroke: 300 mm Distance base plate – spindle nose: 630 – 1380 mm Column arm vertical adjustment: 750 mm Total power requirement: 6 kW Machine weight: approx. 4 t Machine dimensions (L x W x H): 2,740 x 1,140 x 2,590 mm - with threading unit - Accessories: cube table (L x W x H): 550 x 550 x 550 mm, machine vice, coolant system

Kondisi: bekas, 72″ x .187″ x 50.000 lb Paxson Loop-Längsteilanlage Hersteller: Paxson Materialbreite: 12″ – 72″ (Abwickler 60″) Materialdicke: .010″ – .187″ Coilgewicht: 50.000 lb Coil-Innendurchmesser: 20″ – 24″ Coil-Außendurchmesser: 72″ Geschwindigkeit: 500 / 1.000 fpm Laufrichtung: von rechts nach links Materialfestigkeit: 40.000 psi Streckgrenze / 50.000 psi Scherfestigkeit Verarbeitbare Materialien: Kaltgewalzt (CR), Warmgewalzt (HR), verzinkt Einlauf-Transferwagen Einlauf-Coilwagen Abwickler mit Spannzapfen Angetriebene Niederhalterolle Motorische Spreizung Njdpeihf Ufefx Afvewk Verschiebbare Grundplatte Hydraulischer Abziehtisch Angetriebene Quetschwalzen

Kondisi: bekas, Tahun pembuatan: 1983, Bohrleistung_in_Stahl Nwsdpfx Aotv Iklofvsk

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Njdouz If Nepfx Afvjwk Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, berat gulungan: 15.000 kg, tebal plat aluminium (maks.): 4 mm, ketebalan pelat baja (maks.): 4 mm, ketebalan pelat tembaga (maks.): 4 mm, diameter dalam: 508 mm, ketebalan lembaran (maks.): 4 mm, diameter luar: 1.800 mm, lebar gulungan: 1.600 mm, jumlah bilah: 4, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, diameter rol pelurus: 75 mm, kapasitas angkut: 15.000 kg, lebar yang dibutuhkan: 3.500 mm, persyaratan ruang panjang: 12.000 mm, kebutuhan tinggi: 3.500 mm, diameter rol pengumpan: 250 mm, jumlah rol pemakan: 2, Máquina CTL Demaq Evo. Nueva, en stock. Capacidad de bobina hasta 15 toneladas, diámetro 1800 mm, 20-24" nominales. Carro porta-bobinas hidráulico. Alimentador con 2 rodillos de avance y 11 rodillos enderezadores. Rodillos endurecidos y cromados. Servo Nidec en la enderezadora y desenrollador. 4 cuchillas longitudinales, eje (HC) de 230 mm, cuchillas de 300 mm. Nedju Ey D Sjpfx Afvowk Cizalla transversal. Fabricación íntegra en España en nuestras instalaciones. Opcional: otros dispositivos y configuraciones bajo pedido. La máquina Demaq SPL más avanzada del mercado. Disponibles 2 unidades.

Kondisi: baru, Tahun pembuatan: 2025, Working width: 510 mm Planing height: 250 mm Cutterhead: Tersa Number of knives: 4 Nedpfx Ajgqwx Hsfvswk Height adjustment: electric Planing thickness display: digital readout Feed speed: 8 / 16 Infeed roller: steel Pressure bar: segmented Outfeed roller: steel Table rollers: none Motor power: 7 kW Extraction connection: 120 mm Machine length: 800 mm Machine width: 900 mm Weight: 650 kg

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm Nodo A Dimopfx Afvswk

Tahun pembuatan: 2007, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12428 B500-851, bridge crane ± 14,170 mm x 25,000 kg Nwjdpjv Ip Afefx Afvek

Kondisi: bekas, Tahun pembuatan: 1987, Translation of technical machinery sales description: x-axis travel 400 mm y-axis travel 250 mm Workpiece height 485 mm Control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4000 kg Space required approx. m H A U S E R (Switzerland) Nwodpfx Ast Hw Txjfvjk CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Longitudinal table travel max. (X) 400 mm Cross table travel max. (Y) 250 mm Vertical adjustment of grinding carriage max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16° Grinding diameter, borehole max. approx. 230 mm 18 spindle speeds, depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary rotation speed (C), continuously variable 5-250 rpm U-axis, radial feed 6 mm Total drive approx. 10 kW – 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special equipment: • CNC path control Type CNC 314 (ELESTA-POSELESTA II) with monitor, for 4 axes (=X, Y, C + U-axis), with interpolation in 2.5 dimensions (X, Y, C). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly on the machine, with various sub-programs, as well as manual axis movements from the control panel or with an electronic handwheel. Separate digital display for the Z-axis • U-axis as manual and controlled radial feed axis, on the grinding head, with digital display of feed rate, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm, • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system • Separate coolant unit with band filter, separate hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories available at present. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice