Setengah portal 22tone / 2x16tone. Hampir Seperti Baru

DCB

Tahun pembuatan: 1990, Kondisi: baik (bekas), Coil weight: max. 15 t Coil outer diameter: max. 1,800 mm Iaodpfxolimuhs Ag Rep

Kondisi: baru, Tahun pembuatan: 2026, jumlah rol: 3, diameter poros: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rolls are hydraulically adjusted Iedpoucqqujfx Ag Rsap - Three rolls driven - 2 digital readouts - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Tahun pembuatan: 1990, Kondisi: baik (bekas), Coil weight: max. 15 t Coil outer diameter: max. 1,800 mm Iaodpfx Agsbibu To Rjp

Kondisi: baru, Tahun pembuatan: 2025, The XTON Smart Cleaner SC1000™ Automatic Basket Cleaning System is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in a variety of industries and in the automotive sector. The cleaning unit is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is maximised by our proprietary XPOWER Active Cleaner BA fluid, which, combined with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed circuit at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-litre tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, as well as safe and convenient operation. The cleaning system is engineered for the automatic removal of contamination from surfaces made of cast iron, aluminium, and steel. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with 100 cm diameter - Heated tank with 300-litre capacity - Dual liquid filtration system - Level and temperature sensors - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-litre starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Basket load capacity: 300 kg - Adjustable working time: 0 - 99 min - Wash/liquid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Degree of protection: IP 54 Iaodpfxsu R Urhe Ag Rep - Declaration of conformity: CE

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet. Ijdpfehrnbkex Ag Rjap

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.550 mm, diameter pembubutan di atas alas geser: 1.550 mm, diameter pembubutan di atas carriage atas: 1.220 mm, panjang pembubutan: 6.000 mm, panjang total: 8.500 mm, lebar total: 1.600 mm, tinggi total: 1.600 mm, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the acceptance criteria of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul on order, delivery time 3.5 months from order placement Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Iaodpfx Asv Ab Dqjg Rjp Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post - Rear safety guard along the entire length of the machine - Frequency inverter incl. soft-start function and potentiometer for stepless speed control

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, General Tool magazine: 2x chain-type magazines with 32 stations each Rapid traverse (X/Y/Z): 48 m/min Travel (X/Y/Z): 800/900/620 mm Spindle Technology: Direct drive Speed: 15,000 rpm Tool holder: HSK-A63 NC Rotary Table Technology: Swivel rotary table with torque drive, Kessler A-axis: +/- 120° C-axis: 360° Clamping surface: ø800 mm Table load (max.): 1,000 kg Workpiece dimensions (max.): ø800 x 500 mm Equipment Position measuring system: Direct (glass scales) on all axes Iodpfsur Ng Usx Ag Roap Chip management: Chip conveyor Coolant management: ICS system with filter and high-pressure, 18 bar Workpiece measurement: Probe, Heidenhain TS 740 Tool measurement: Laser, BLUM Setup mode: Electronic handwheel Additional equipment: Spindle cooler

Kondisi: seperti baru (mesin pameran), Used/refurbished hub motor for a DH wire rope hoist Iasdjh Up Uyspfx Ag Rsp ATTENTION! We have more than 15,000 Demag parts in stock For more information, please visit our website or view our other listings.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Iedpfx Agofz U S Eo Roap Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Iasdpfx Agebn Amfj Rjp Weight: 11 t