Pusat pemesinan universal

Deckel Maho DMC 80 FD Hi DYN

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 47.000 h, daya laser: 2.000 W, gaya punching: 76 t, berat benda kerja (maks.): 120 kg, jangkauan kerja: 2.500 mm, Perlengkapan: penghadang cahaya keselamatan, unit pendingin, Special equipment: + Thread forming function with thread former breakage monitoring + MultiTool function + Marking/Fast Beading function + Secondary ram + Sensor for parts chute Standard equipment: - Robust C-frame - Coordinate guidance with integrated linear magazine - 21 tool and clamp positions - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact extraction system - Rotatable tool holder - Automatic secondary ram with hold-down device - Automatic parts chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Punch spray lubrication - Second lubricant container - Scrap slug extraction - Chip bucket Nsdswcq Hgspfx Ahwscn - Hydraulic quick disconnect - External control panel - 15" TFT color touchscreen - USB stick interface - 3.5" floppy disk drive - Safety devices - RJ45 network port - Network connectivity - Detailed operating instructions - Remote diagnostics system

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 1,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm C-axis: 360° x 0.001° A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain type, 180 positions Total power requirement: 85 kW Machine weight approx. 20.5 t Space requirements approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary-swivel table Rotoclear window Probe interface prepared Blum laser tool measurement Vibration sensor Tool taper cleaning Operating mode 4 IKZ (internal coolant supply) with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Ncedpfx Ajw E Nnnjhwon Cooling / heating unit

Kondisi: bekas, Tahun pembuatan: 2011, DMU100: 5-sumbu Njdpoxpt Idjfx Ahwocn Spindel 18.000 rpm Majalah alat 32 slot Chuck alat SK40 Jam kerja spindel: 15.389 Zeroclamp 12 pot 138 (sistem penjepit titik nol)

Kondisi: bekas, Tahun pembuatan: 2012, X-axis travel 630 mm Y-axis travel 800 mm Z-axis travel 750 mm Control SIN 840D sl Siemens B-axis 360 x 0.001° A-axis -200 to +25 x 0.001° Spindle speed – infinitely variable 20 - 18,000 rpm Drive power 100% duty cycle 28.00 kW Drive power 40% duty cycle 34.00 kW Torque at 40% / 100% duty cycle 110 / 84 Nm Tool holder HSK 63 Feed rate X/Y/Z axis 1 - 100,000 mm/min Rapid traverse X/Y/Z 100.00 m/min Feed force X/Y/Z 9 / 6 / 9 kN Feed rate B axis 1 - 14,400°/min Feed rate A axis 1 - 7,200°/min Pallet size 2x 500 x 500 mm Max. workpiece weight 400 kg Max. workpiece diameter 800 mm Max. workpiece height 800 mm Tool magazine with 63 positions Max. tool diameter 280 mm Max. tool length 550 mm Max. tool weight 15.00 kg Ncodpfx Aevxwxvehwen Total power requirement 65.00 kW Machine weight approx. 14.00 t Space required approx. 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, emulsion mist extractor. Machine was operated in a production line, therefore supplied without chip conveyor and without coolant system.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999,

Kondisi: bekas, Tahun pembuatan: 2008, Travel X-axis: 800 mm Travel Y-axis: 800 mm Travel Z-axis: 800 mm Control: Sinumerik 840D Spindle speeds, stepless: 20 – 18,000 rpm Drive power (40% duty cycle): 28.00 kW Njdpfx Aowiii Hohwscn Drive power (100% duty cycle): 19.00 kW Spindle torque: 121 / 82 Nm Spindle interface: HSK-A63 B-axis: -10° to +180° C-axis: 360 × 0.001° Feed rate X/Y/Z-axes: 20 – 10,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min Feed rate B-axis: 1 – 10,800 °/min Rapid traverse B-axis: 30.00 rpm Pallet size: 800 × 630 mm Workpiece diameter (max.): 800 mm Workpiece height (max.): 1,330 mm Table load: 1.20 t Tool magazine: Chain magazine, 180 slots Tool diameter: 80 mm Tool diameter with 2 free adjacent slots: 160 mm Tool length (max.): 450 mm Tool weight (max.): 15.00 kg Total power requirement: 57.00 kW Machine weight (approx.): 22.00 t Space requirements (approx.): 8.50 × 5.50 × H3.80 m 5-axis machining center with SIEMENS Sinumerik 840D powerline control, pallet storage system RS4, chip conveyor, coolant system with temperature control, coolant through spindle 40–80 bar steplessly adjustable via M function, air blast through spindle center, tool taper cleaning device, extraction unit, mechanical tool breakage monitoring, workpiece measurement with Renishaw (without probe), electronic handwheel. Machine is supplied without pallets!!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 17.050 h, jarak pergerakan sumbu X: 670 mm, jarak lintasan sumbu Y: 830 mm, jarak gerak sumbu Z: 600 mm, berat keseluruhan: 20.000 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle installed in 2021 with only 5,700 operating hours, and a robust spindle speed of 18,000 rpm. The machine offers a large travel range with dimensions of 670/830/600 mm and accommodates 96 tool stations. Additional features include through-spindle coolant supply with 60 bar, a comprehensive coolant system, and a chip conveyor. Take advantage of this opportunity to purchase a POSmill H 800 U universal machining center. Contact us for further information. Additional equipment: • New spindle since 2021: only 5,700 spindle hours (spindle replaced due to wear) • Inspection under power possible Advantages of the machine Technical features: • Air supply through the spindle • Internal coolant supply: 60 bar • Coolant system with 1,000 l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage detection/measurement • Heidenhain 3D touch probe • Mobile electronic handwheel • Kinematic package Additional information: Ncjdpfsx D Dx Asx Ahwjn Spindle replaced due to wear (new spindle: 5,600 hours since 2021) Production hours: control on: approx. 33,300 hours, spindle on: 17,050 hours (new spindle 5,600 hours, replaced in 2021 due to wear) Tool stations: 96 Including tool holders (shrink chucks, collets, etc.)

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 32.590 h, kecepatan spindel (maks.): 12.000 rpm, Perlengkapan: dokumentasi / manual, Operating hours: 14,150 hours On power: 32,590 hours Nedou Ut A Depfx Ahwecn Sensor cable and tool changer motor new Price on request Various tools available; if interested, we will gladly send pictures and an offer.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2001, Mesin unggulan Ncedpfx Aex Ifa Sehwsn

Kondisi: bekas, Tahun pembuatan: 2009, Technical details: Njdpfxowdyyfo Ahwocn X-axis travel: 630 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Spindle speed: Spindle drive: 32 kW Pallet size: 500 x 500 mm B-axis: 36,000 x 0.001° Number of tools in magazine: 61 pcs Tool holder: HSK 63 Machine weight approx.: 15 t Single-spindle Mechanical machining of VR6 cylinder head