Pusat permesinan - universal

Deckel Maho DMU 50 evo linear

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 32.498 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, daya nominal (semu): 35 kVA, produsen pengendali: Heidenhain iTNC 530, lebar benda kerja (maks.): 500 mm, diameter benda kerja (maks.): 630 mm, berat benda kerja (maks.): 200 kg, tinggi total: 2.590 mm, panjang total: 4.780 mm, lebar total: 4.410 mm, berat keseluruhan: 5.900 kg, kecepatan spindel (min.): 18.000 rpm, daya motor spindle: 35.000 W, Year of manufacture: 2010 CNC control: Heidenhain iTNC 530 Axes Travel X-axis (mm): 500 Travel Y-axis (mm): 450 Travel Z-axis (mm): 400 C-axis indexing (°): 360º (0.001) B-axis indexing (°): 0º/108º (0.001) Rapid traverse (m/min): 80/50/50 NC milling/turning table: Pallet dimensions (mm): Ø390 Max. workpiece size (D x H, mm): Ø630 x 500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 18,000 Spindle drive power (kW): 35/25 (40% duty cycle/cont.) Spindle torque (Nm): 130/87 Cooling Coolant supply through spindle (bar): 40 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 30 With empty adjacent pockets (mm): 130 With filled adjacent pockets (mm): 80 Max. tool length (mm): 300 Chip-to-chip time (sec.): 5 Equipment Chip conveyor Infrared probe Rinse gun Air blast through spindle selectable via M function Signal lamp Laser tool measurement for tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Prepared for internal cooling (40/80 bar) RENISHAW probe Automatic door Machine run time: Power-on hours: 54,257 Spindle hours: 32,498 Total power requirement (kVA): 48 Basic machine: dimensions/weight Length (mm): 4,780 Width (mm): 4,410 Height (mm): 2,590 Weight (kg): 5,900 Kodpfoyi Dniex Ac Hewu

Kondisi: baik (bekas), Tahun pembuatan: 2016, HURCO CNC Pusat Pemesinan VMX 24 i Perjalanan Sumbu Sumbu X (mm): 610 Sumbu Y (mm): 508 Sumbu Z (mm): 610 Kwsdpfx Aexvtihec Hsu Spindel Utama Konde spindle (DIN 69871): SK 40 Kecepatan spindle maks. (rpm): 12.000 Daya spindle maks. (kW): 9 Torsi spindle maks. (Nm): 95 Laju Maju Laju cepat sumbu X / Y / Z (m/menit): 38 / 38 / 32 Penukar Alat Posisi majalah / opsional: 30 Diameter alat maks. (mm): 80 Panjang alat maks. (mm): 300 Berat alat maks. (kg): 7 Data Lainnya Luas area yang dibutuhkan (mm) (pintu terbuka, termasuk kontrol dan konveyor serbuk): 3.930 x 4.041 x 2.725 Berat mesin (kg): 4.750 Kapasitas tangki pendingin (l): 367 Konveyor kerik standar Spesifikasi teknis dapat berubah tanpa pemberitahuan sebelumnya.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 42.768 h, produsen pengendali: HEIDENHAIN, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, en Kwedpfx Ajx Rd Hpsc Hou

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), cnc-5-achs-fraesmaschine-deckel-maho-angebot Kedpsx Dm D Uefx Ac Hjwu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction Kjdpfx Acsxmhdns Hewu - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, konveyor serpihan, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 control, EXCELLENT condition Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Model: iTNC 530 >> Travels: X 500 / Y 450 / Z 400 mm >> C-axis: 360 degrees >> B-axis: 0 degrees to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C/B-axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axis: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction system >> ICS (internal coolant supply) 40 bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Prepared for robotic loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics Kodpfxevyr Tdj Ac Hewu >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following maintenance work has been carried out: >> Main work spindle completely overhauled >> Full maintenance: All coolant hoses and pneumatic hoses replaced, new filters, all fluids and belts renewed. Wipers and more. Thorough cleaning performed. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with TNC 530 3D path control from Heidenhain. The machine is in excellent condition. The main spindle has been overhauled (replacement spindle), fully serviced, and an inspection protocol is available. Take the opportunity to view and test the machine under power at our facility.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 37.654 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10915548924, kecepatan spindel (maks.): 18.000 rpm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Kami menawarkan pusat pemesinan universal Deckel Maho DMU 50 eVo linear bekas produksi tahun 2006 ini. Kwjdpjx Srp Ujfx Ac Hju Rel pemandu pada sumbu X, Y, dan Z serta sekrup bola telah diganti sepenuhnya pada akhir 2023. Secara geometris, mesin ini saat ini dalam kondisi hampir seperti baru. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baik (bekas), Tahun pembuatan: 2009, 10556 Kwsdpfjxc Tt Tox Ac Heu

Kondisi: baik (bekas), Tahun pembuatan: 2006, TECHNICAL SPECIFICATIONS Main Drive Spindle Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Working Spindle: Taper: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: Up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position Measuring System Resolution C, B, X, Y, Z: 0.001 mm Position tolerance C, B, X, Y, Z: 0.010 mm Working Range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine capacity: 120 Max. tool diameter without free spaces: 80 mm Max. tool diameter with free spaces: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface, rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Kwodpfju Hkb Rox Ac Hju Weight: 420 kg Max. load: 200 kg Weight: approx. 6,800 kg Operating weight: approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF DELIVERY Including but not limited to: Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage monitoring system Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the above information.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 50.000 m/menit, pergeseran cepat sumbu Y: 50.000 m/menit, pergerakan cepat sumbu Z: 50.000 m/menit, lebar meja: 380 mm, panjang meja: 500 mm, beban meja: 200 kg, diameter pemasangan: 30 mm, de_to_hu_it_lt_001 Kodpfx Aew Rl Igsc Howu

Kondisi: bekas, Tahun pembuatan: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D ShopTurn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Driven tool speed: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis Kwsdpfxsww Nazs Ac Hju Equipment: - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guideways - Tool measurement arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 1.380 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 350 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 30, sudut putar sumbu B (maks.): 108 °, sudut putar poros C (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Ksdpfxjwu Evto Ac Hswu Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool stations: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS CNC control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Automatic tool changer - NC rotary/swivel table - Through-spindle coolant (TSC): 40 bar preparation - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement