Pusat permesinan - universal

DECKEL DMU 50

Kondisi: bekas, Tahun pembuatan: 2008, xWeg500mm-2024 Kljdpfx Aaexluf Ao Nsl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar meja: 750 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, 5-axis machining center DMG MORI - DMF 260-7 X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360,000° B-axis: -110° to +110° Table length: 2,900 mm Table width: 750 mm Table load capacity: 2,150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all important details. Kedpfxsxuqv Ae Aa Nell

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Machine model: DMU 50 eVolution (5-axis machining center) Control: Heidenhain MillPlus (MillPlus control) Axes: 5 (X, Y, Z, B, C) Machine weight: approx. 5,000 – 5,100 kg Installation dimensions (L × W × H): approx. 2,683 × 5,353 × 2,470 mm Total power requirement: ~ 38 – 40 kVA Working area & axes X-axis travel: 500 mm Y-axis travel: 420 mm Z-axis travel: 380 mm B-axis (swivel range): ± 180° C-axis (rotary range): 360° Spindle data Max. speed: 20 – 18,000 rpm (infinitely variable) Spindle drive: approx. 35 kW (40% duty cycle) / 25 kW (100% duty cycle) Torque: approx. 130 Nm (40% duty cycle) / 87 Nm (100% duty cycle) Tool holder: SK 40 (standard) – HSK optional on some models Table & workpiece Table size: ø 500 × 380 mm Max. table load: 200 kg T-slots: 7 × 14 mm (H7) ⚙️ Tool magazine Magazine positions: 32 Max. tool length: ~ 200 mm (depending on magazine configuration) Max. tool weight: ~ 6 kg Klodpoyay Rzsfx Aa Nel Feed rates / rapid traverse Working feed rate: up to 20,000 mm/min Rapid traverse X/Y/Z: up to 50 m/min

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, produsen pengendali: HEIDENHAIN, jumlah sumbu: 5, Pusat pemesinan vertikal 5-sumbu DECKEL MAHO DMU 50 eVolution ini diproduksi pada tahun 2002. Pusat pemesinan ini ideal untuk tugas pemesinan yang kompleks dan menawarkan presisi serta fleksibilitas dalam ruang yang minimal. Periksa kemungkinan untuk membeli pusat pemesinan vertikal DECKEL MAHO DMU 50 eVolution ini. Hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Ringkasan ini hanya mencakup informasi relevan sesuai detail dan petunjuk yang diberikan. Informasi tambahan Klsdpfxsyaimxo Aa Nsl Mesin masih dalam kondisi terpasang listrik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 800 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, produsen pengendali: HEIDENHAIN, model controller: TNC 530i, lebar meja: 870 mm, panjang meja: 3.500 mm, beban meja: 3.500 kg, diameter meja putar: 800 mm, berat keseluruhan: 24.000 kg, kecepatan spindel (min.): 60 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, daya motor spindle: 22 W, hidung spindel: ISO 40, jumlah slot dalam magazin alat: 60, panjang alat: 300 mm, diameter alat: 76 mm, berat alat: 8 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, Pusat pemesinan universal bekas dengan kolom bergerak 5 sumbu dengan CNC Heidenhain TNC-530, kepala berayun, meja putar terintegrasi. Klsdpfxexixn No Aa Nel

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 73.090 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 350 mm, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, daya nominal (semu): 21 kVA, produsen pengendali: Siemens, model controller: 840D powerline, lebar meja: 380 mm, panjang meja: 500 mm, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 24.649 h, jumlah slot dalam magazin alat: 30, tegangan masuk: 400 V, jumlah sumbu: 5, Perlengkapan: konveyor serpihan, For sale is a machining center from the manufacturer Deckel Maho DMU 50 in well-maintained, technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and technically. It is fully functional, tested, and ready for immediate use. Further equipment: - Paper strip filter - Coolant system (KSS unit) With our all-inclusive package, we personally handle the complete service for you on request—from delivery to commissioning of your new machine. This includes unloading, installation, and alignment of the machining center. Our experienced service technicians then carry out professional commissioning, perform all necessary functional tests, and ensure that your machine operates reliably and precisely. We also offer customized training for your employees, so you can get the most out of the machine right from the start. Even after installation, we are happy to assist you—be it with maintenance, technical inquiries, or future upgrades. With our all-inclusive package, you do not have to worry about a thing—we ensure everything runs smoothly, allowing you to fully focus on your production. Optionally, you can also purchase extraction units, attachments, and accessories from us—in particular, we offer quality Donaldson extraction systems to help make your production even more efficient and cleaner. Our service promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other manufacturers. We value personal consultation and support, even after your purchase. You are welcome to inspect and test the machine under power at any time in our facility. We cordially invite you to see the condition and functionality for yourself on site. With us, you are in the best hands—professional, reliable, and with a passion for machinery! Kedpfsxwtp Rjx Aa Nsll PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 12.800 h, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It is equipped with a Millplus control unit running software version DV400, an external hydraulic power unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet clamping. If you are looking for a high-quality milling machine, you should consider the DECKEL MAHO DMU 50V that we have for sale. Contact us for further information about this machine. Additional Equipment • Hainbuch hydraulic vise for BZI32 collet Machine Advantages Technical Machine Advantages • The machine currently operates with a motor encoder, as the encoder for the C-axis is defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool pockets – 2 partially available (slots are no longer present) • Probe: Renishaw – prepared Additional Information Machine still under power Kedpfxjx U Tine Aa Njll

Kondisi: bekas, Tahun pembuatan: 2012, en-20240619-01 Kedevivx Njpfx Aa Nell

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, 1 Klsdpfex Auvvex Aa Nel

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M Equipped with Heidenhain TNC 320 control Year of manufacture: 2001 Travel paths: X 500 mm Y 400 mm Z 400 mm Ksdpouw Sd Ijfx Aa Nell Speed range: 20 – 4,500 rpm, infinitely variable Including the following accessories: Manual swivel rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard enclosure Machine lamp 4 pcs height-adjustable machine feet Coolant system Operating manual

Kondisi: bekas, Tahun pembuatan: 2000, X-axis travel 3,700 mm y-axis travel 3,050 mm z-axis travel 1,000 mm Control HEIDENHAIN TNC-430 PA Distance between columns 2,300 mm Spindle nose to table 1,175 mm Rapid traverse x/y/z 25,000 mm/min Feed rate 15,000 mm/min Tool holder ISO-50 - DIN 69871 Table load capacity 20,000 kg Spindle motor 37 kW Milling head - swiveling + / - 45° Milling head B axis 360,000 positions Tool changer 30 stations/tools Chip conveyor included Internal coolant supply 20 bar Kledjwg Hrgepfx Aa Njl Table size 4,000 x 1,800 mm Machine weight approx. 42 t KPU-4000 AR

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 32.966 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 426, tinggi total: 2.534 mm, berat keseluruhan: 3.000 kg, panjang produk (maks.): 1.783 mm, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2001. It features a manual rotary table with a clamping surface of 700 x 500 mm and a maximum load capacity of 200 kg. The spindle speed reaches up to 9,000 rpm, and the machine is equipped with a tool changer offering 16 magazine positions. The machine dimensions are 1,783 x 1,647 x 2,534 mm with a weight of 3,000 kg. Consider the opportunity to acquire this DECKEL MAHO DMU 50 T vertical machining center. Please contact us for further information. • Rotation: 360° • Swivel: -10°/+95° • Spindle speed: 9,000 rpm • Power (100%/40% duty cycle): 9/13 kW • Tool holder: SK 40 DIN 69871 • Feed rate X, Y, Z: 10,000 mm/min • Rapid traverse X/Y/Z: 12 m/min Klodpsx Uqmdofx Aa Nsl • Manual rotary table with tilting axis • Clamping surface: 700 x 500 mm • Max. load: 200 kg • T-slot pitch/width: 63 mm / 14 H7 • Magazine positions: 16 • Max. tool length: 290 mm • Max. tool weight: 6 kg • Equipped with electronic handwheel Dimensions Machine depth: 1,647 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 37.300 h, Fungsionalitas: berfungsi sepenuhnya, Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: TNC Heidenhain Spindle speed range (main spindle): 20 – 9,000 rpm Ksdpfx Aajwm Nqrj Nsll Drive power (main spindle): 9 / 13 kW Table size: 700 x 500 mm Tiltable B-axis: 105° (-10°/+95°) manual Rotatable: 360° manual Max. table load: 200 kg Number of T-slots: 7 Centering bore: 30H7 mm Number of tool pockets: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total weight: 50 kg Rapid traverse rate max.: 10,000 mm/min Total connected load: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, jam operasional: 1.265 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 20.000 rpm, diameter pembubutan: 4 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Citizen R-serisi, küçük çaplı işleme için özel olarak tasarlanmış otomatik torna tezgâhlarıdır. Bu makine çok az kullanılmıştır (15.800 parça işlenmiştir). Model yılı: 2013. Kljdpjvtancofx Aa Nsl ASP-04 çubuk sürücü ile birlikte. Satış Türkiye dışına gerçekleşirse KDV uygulanmaz.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 3.600 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 9.000 W, jumlah sumbu: 5, This 5-axis vertical machining center, DMG DECKEL MAHO DMU 50, was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 rpm, and a rotary table with a clamping area of 630 x 500 mm. The machine has been thoroughly overhauled, including complete replacement of the X-axis bearings and installation of a new coolant pump. If you are looking for a high-quality milling machine, consider the DMG DECKEL MAHO DMU 50 we are offering for sale. Please contact us for further information. Additional Equipment • Tool positions: 16 / Max. tool weight: 6 kg / Max. tool length: 300 mm • Max. tool diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm • Total power requirement: 17 kVA • No chip conveyor included / No automatic probe included / No tools included Machine Advantages Qualitative Advantages • Low spindle hours and operating hours. • Never used in series production; operated carefully and in accordance with proper procedures. • Warm-up programs and maintenance routines for optimum performance. Technical Advantages • Torque: 57 / 82 Nm / Rapid traverse (X/Y/Z): 12 m/min / Feed rate: 10,000 mm/min • Table clamping area: 630 x 500 mm • Swivel range: -5 / +110° • Max. table load: 200 kg • T-slots: 14 h7 / T-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete overhaul of the X-axis bearings, including ball screw and bearing unit. / Various hydraulic components overhauled. / Tool changer readjusted and sensors replaced. • New door switch installed. / New glass panes fitted (some chips affecting them). / New coolant pump installed. / New strainer installed. / New handwheel HR410 installed. • The machine is a 5-axis model with a 3+2 configuration. Technical Specification Taper size SK 40 Kledpfx Ajx E D U Aoa Nel