Derek kanopi Derek Derek Derek dalam ruangan Landasan pacu derek

Demag Kranbahn KBK2 500KG 9x7m Zub. Demag KBK II KBK1 500Kg DK Kettenzug

Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Fgodjg Tzbhopfx Ahuea Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Kondisi: seperti baru (mesin pameran), Hydraulically height-adjustable welding turntable, 3000 kg capacity Fgodedvn E Uopfx Ahuoa - Speed range: 0.05 to 0.6 rpm - Table diameter: 1200 mm - Tilt angle: 0 to 120° - Total height adjustment: approx. 700 mm - Height adjustment (with vertical plate to center): 960 mm to approx. 1910 mm - Dimensions with horizontal plate: 1200 mm to 1900 mm

Kondisi: baru, Fastech 3-Roller Round Bending Machine FRM 1050 x 90 Technical Specifications: Special equipment included in the price: hardened rollers motorized adjustment of the rear roller digital display Sheet width: 1050 mm Fodehzq Dbspfx Ahujga Sheet thickness max.: 3.3 mm Sheet thickness for pre-bending: 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Minimum bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: Top and bottom rollers electrically driven Top roller swing-out Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operation panel Safety cord Technical data based on St-37 / 240 N/mm² CE mark

Tahun pembuatan: 1985, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: (20020324 EG) - VK-RES, DEMAG KBK crane system with runway dimensions approx. 16.5x7m (7m bridge – double-girder crane) Load capacity / lifting capacity: 500 kg – 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/hangers, etc. incl. Demag PK2 500KG chain hoist – lifting height approx. 4.5m Crane is dismantled and available immediately Used condition, see photos Location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Fgjdpfxoty S I Ee Ahuoa Other KBK systems available as well. Load capacity: 125kg – 1600kg Please feel free to send a non-binding inquiry with your required crane runway load capacity and dimensions.

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel Fsdpfjww Adtox Ahujga - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: bekas, Tahun pembuatan: 1983, 4 x complete spray booths with drying ovens for buses. Fully operational with all walls/constructions and engines/burners. Fsdpfx Ahjwrpwvjusga

Kondisi: bekas, Beragam pemegang alat dari Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, dan lainnya. Alat bubut dan milling dengan dudukan VDI 40. Hanya dijual per palet. palet 1 total 3.220 euro 4x alat penggerak VDI 40 seharga 580 euro/buah 10x pemegang alat VDI 40 seharga 90 euro/buah palet 2 total 3.130 euro 4x alat penggerak VDI 40 seharga 580 euro/buah (1x baru) 9x pemegang alat VDI 40 seharga 90 euro/buah Fodpfx Ahevpvmtsusga palet 3 sudah terjual palet 4 sudah terjual

Kondisi: bekas, Wall-mounted slewing crane DEMAG Type KBK 2 Demag boom number: KBK- 982 040 44 Demag wall bracket number: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height from underside of jib to top of wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Fgsdpfxotqwrvj Ahuja Total length from flange plate wall bracket to jib tip: 4330 mm - Jib profile: C-section rail DEMAG KBK 2 - Trolley for C-section rail DEMAG KBK 2 - Original yellow paint Dead weight: 170 kg Very good condition Price without chain hoist – chain hoists or cranes can also be found in our shop.

Kondisi: bekas, Tahun pembuatan: 1986, Cutting diameter: 460 mm Saw band length: 5334 mm Cutting width: 1.3 mm Square cutting range: 320 x 320 mm Fjdpfxstqqrfo Ahusga Flat cutting range: 500 x 320 mm Control unit: minipos 807 Cutting speed: 16 – 80 m/min Saw blade dimensions: 5334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5800 mm Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: roller conveyor 4150 mm long, roller conveyor 2150 mm long, bundle clamping device, chip conveyor, coolant system

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBUT133-544, Demag KBK crane runway with approximate dimensions 10.5 x 6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made from Demag KBK1/2 rails. System is supplied complete: KBK rails, rail connectors, carriages, end plates, cable support, brackets Including steel 500 kg chain hoist – lifting height approx. 3 m Crane is dismantled and available immediately. Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection only by prior arrangement Demag KBK1, KBK2 and KBK3 rails are in stock! Fedpjty Sxwjfx Ahuoga Other KBK systems also available. Load capacities from 125 kg to 1600 kg. Please inquire for your crane runway, specifying load capacity and dimensions, without obligation.