Sistem derek

DEMAG DC-Pro 5 - 500 H5 V1

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm Hnsdpfx Aasbn Amfjnsl 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: Hodevf E Avepfx Aanonl The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: Hnsdpfeg Ezarex Aanjl 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Hnodpfx Aerx Rxtoanel X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: bekas, Tahun pembuatan: 2010, Pillar slewing crane: mobile Outreach approx. 2500 mm Machine weight approx. 4 t Load capacity 125 kg Bucket tare weight 430 kg Hnsdpfemt Rpwox Aanol Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documents/papers.

Kondisi: bekas, Beragam Rak Penyimpanan Lengan (Kragarmregal) 4x rak: Ukuran: 6.125 x 2.400 x 3.000 mm Berat sekitar: 8.000 kg 2x rak: Ukuran: 5.650 x 2.400 x 3.000 mm Hedpfsyrq Nlox Aanjnl Berat sekitar: 7.380 kg Sertifikat perhitungan statik tersedia. !! Gambar 1 menunjukkan rak dalam kondisi terpasang !!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, We offer you the following: Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2019 Control unit: Heidenhain TNC 640 Technical specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Hjdpfxoy Rx Sto Aansnl B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range: 0 – 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Working table: Swiveling rotary table, simultaneous operation possible: Ø 650 x 500 mm Tool changer: Tool holder: CAT 40 (conversion to SK 40 possible) Number of tool pockets: 60 positions Operating hours: approx. 13,500 h Spindle hours: approx. 5,300 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in X, Y, Z, B, C - Scraper belt chip conveyor - Internal coolant supply (IKZ) 40/80 bar, comprising: - Paper band filter - 980 l tank - Cabin roof - Rotary union in the spindle - Air blast through the center of the spindle - Dual switch filter - Rotating viewing window - Rinsing gun for chip flushing - Oil and emulsion mist separator - Infrared probe, Renishaw PP 60 optical (OMP 60) – Tool breakage detection IRS2 - Prepared for use with 3D quickSET - MPC (Machine Protection Control) - Operating mode 4 - Coolant temperature control for IKZ system Accessories, pictured tools, and clamping devices are included in the scope of delivery only if stated in the additional information. Specifications and details are subject to change and errors. Sale subject to prior sale.

Kondisi: bekas, nomor mesin/kendaraan: 008161, tr-de-001 Hjdsx A Tlcopfx Aanjnl

Tahun pembuatan: 2016, jam operasional: 10.900 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi sangat baik dan sepenuhnya berfungsi. Kami tidak membutuhkannya lagi sehingga dijual. Mesin telah dirawat secara rutin. Pembongkaran dan pemuatan ke truk sudah termasuk dalam harga. Informasi lain: Pusat permesinan profil 4-sumbu Dirancang untuk pemrosesan aluminium yang fleksibel dan efisien Penempatan clamp otomatis Panjang kerja maksimum: 7.600 mm 8 clamp pneumatik Majalah alat dengan kapasitas 8 alat Jam kerja spindle: 5100 jam Hsdpfx Aajwwtylsnsnl Spesifikasi teknis tambahan tersedia berdasarkan permintaan.

Tahun pembuatan: 2004, Kondisi: baik (bekas),