Lebih dari 15.000 suku cadang Demag dalam stok

Demag

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 5.000 kg, panjang total: 7.860 mm, lebar total: 2.900 mm, kapasitas angkut: 5.000 kg, kecepatan pengangkatan utama: 5.000 mm/menit, DETAIL TEKNIS Tipe angkat: P 35 Kecepatan pengangkatan: 5 m/menit Grup FEM: 1Cm Kapasitas angkat: 5 t Tali/Rantai: 16 mm Ukuran Y/W 1: 111 mm DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 7.860 x 2.900 x 1.000 mm Berat kosong: 5.000 kg PERLENGKAPAN Remote control nirkabel Dedpsyf Av Dofx Abhoun Buku pengujian tersedia Catatan: Rel derek tidak termasuk dalam ruang lingkup penjualan dan pengiriman.

Kondisi: baik (bekas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Dsdjd Tx Ahepfx Abhjun

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 122.158 h, gaya penjepit: 3.300 kN, diameter sekrup: 60 mm, This hydraulic injection moulding machine DEMAG ET 330 - 1450 was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine is equipped with a Wittmann W322-121 linear robot to enhance automation. Take advantage of the opportunity to purchase this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Minimum/maximum mould height: 330 mm / 830 mm • Opening stroke: 675 mm • Daylight between platens: 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cc • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Armoured (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement carried out in 2017 Dsdeyg Nkwepfx Abhsun Additional equipment • Wittmann W322-121 CNC linear robot/extraction device (included in the scope of delivery) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 96.986 h, gaya penjepit: 600 kN, diameter sekrup: 30 mm, en-GB Djdpfx Aboyg Nfujhsun

Kondisi: sangat baik (bekas), Tahun pembuatan: 1968, Equipment: - 1 right-hand gripper feed Duedpfxol D N Hvs Abhon - 1 eccentric press, 90 kN - 2 narrow-slide units - 4 standard-slide units Working range: Wire diameter range: 0.5 - 3.5 mm Strip width: max. 32 mm Feed length: max. 170 mm Performance: max. 250 cycles/min

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Dusdpfx Abeyg Eu Sjhjn

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various injection molding machines available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100 t, screw diameter: 30/35 mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100 t, screw diameter: 25 mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200 t, screw diameter: 25/12+15 mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 35 mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30/25 mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60 t, screw diameter: 25 mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80 t, screw diameter: 25 mm, year of manufacture: 2001. 10) 2x KM SilcoStar 922A, year of manufacture: 2007. Inspection possible on site. Sale of individual machines possible. Some machines are partially cannibalized and/or defective. Dusdpfxswkiice Abhjn

Kondisi: seperti baru (mesin pameran), Used/refurbished traction motor for a DH wire rope hoist. Dsdpfsh Up U Dox Abhjun ATTENTION! We have more than 15,000 Demag parts in stock. For more information, please visit our website or see our other listings.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Several older plastic injection molding machines from Arburg, Demag, and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000 kN, shot weight: 140 g, minimum/maximum mold installation height: 180 mm/480 mm, opening stroke: 320 mm, tie bar spacing: 360 mm/355 mm, screw diameter: 40 mm, core pulls: 1. Dodpfx Abox Hz Sbehoun 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500 kN, shot weight: 207 g, minimum/maximum mold installation height: 320 mm/550 mm, opening stroke: 430 mm, tie bar spacing: 460 mm/460 mm, screw diameter: 45 mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000 kN, shot weight: 130 g, minimum/maximum mold installation height: 200 mm/400 mm, opening stroke: 350 mm, tie bar spacing: 400 mm/400 mm, screw diameter: 38 mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250 kN, shot weight: 25 g, minimum/maximum mold installation height: 225 mm/not specified, opening stroke: 325 mm, tie bar spacing: 270 mm/270 mm, screw diameter: 20 mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850 kN, shot weight: 108 g, minimum/maximum mold installation height: 250 mm/625 mm, opening stroke: 375 mm, tie bar spacing: 320 mm/320 mm, screw diameter: 35 mm, core pulls: 0. An on-site inspection is possible. Sale of individual machines is possible.

Kondisi: siap digunakan (bekas), Clamping force: 350 kN, tie bar distance: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, minimum mold installation height: 180 mm, maximum opening stroke: 350 mm, maximum platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. An on-site inspection is possible. Djdpfowaa H Dox Abhjun

Kondisi: seperti baru (mesin pameran), Used/refurbished hub motor for a DH wire rope hoist ATTENTION! Duedpfoh Up Uyjx Abhon We have more than 15,000 Demag parts in stock For more information, please visit our website or view our other listings.

Kondisi: bekas, Tahun pembuatan: 2006, A Demag Ergotech injection moulding machine, including a Wittmann robot and machine enclosure, is available. 1) Demag Ergotech 50/355-200 injection moulding machine, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, min. mold height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Wittmann W721 handling robot, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety cage. Documentation available. An inspection on site is possible. Djdpfswvadnex Abheun

Tahun pembuatan: 1972, Kondisi: siap digunakan (bekas), The system includes (1) crane DEMAG TC 140, year of construction: 1972, lifting capacity: 50t at 3m outreach, slewing angle: 360°, support base: 5500mm, drives: pneumatic, hydraulic, electric, operating hours: 7153h. (2) vehicle Faun LK 910/483-V, operating hours: 1214h. An on-site inspection is possible. Duodpfxouzx T Rj Abhsn

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Djdpfx Aoqakbrebhsun Model: 470-15-25K-HP Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de-hu-001 Dsdsxrf Nropfx Abheun