Blok bawah Pengait derek P DH PK DK DC

Demag

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 5.000 kg, panjang total: 7.860 mm, lebar total: 2.900 mm, kapasitas angkut: 5.000 kg, kecepatan pengangkatan utama: 5.000 mm/menit, DETAIL TEKNIS Tipe angkat: P 35 Kecepatan pengangkatan: 5 m/menit Grup FEM: 1Cm Duedpfx Abjyf Av Dehen Kapasitas angkat: 5 t Tali/Rantai: 16 mm Ukuran Y/W 1: 111 mm DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 7.860 x 2.900 x 1.000 mm Berat kosong: 5.000 kg PERLENGKAPAN Remote control nirkabel Buku pengujian tersedia Catatan: Rel derek tidak termasuk dalam ruang lingkup penjualan dan pengiriman.

Kondisi: sangat baik (bekas), Control: D.Electron Z 32 Dedped Sitkefx Abheun Center height: 220 mm Distance between centers: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6" Spindle bore: 62 mm Spindle speeds: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill travel (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 122.158 h, gaya penjepit: 3.300 kN, diameter sekrup: 60 mm, This hydraulic injection moulding machine DEMAG ET 330 - 1450 was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine is equipped with a Wittmann W322-121 linear robot to enhance automation. Take advantage of the opportunity to purchase this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Minimum/maximum mould height: 330 mm / 830 mm • Opening stroke: 675 mm • Daylight between platens: 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN Duedpsyg Nkwefx Abhon • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cc • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Armoured (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement carried out in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/extraction device (included in the scope of delivery) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 96.986 h, gaya penjepit: 600 kN, diameter sekrup: 30 mm, en-GB Dodpfeyg Nfujx Abheun

Kondisi: bekas, Elektromotor WWE Dsdpfx Ajc Sqvvobhoun Amerikanisches Modell!! Typ WWE250-18-449T 460 V, 60 Hz, 250 PS (HP), 1790 U/min 282 A Schutzart IP55

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Duedpfjyg Eu Sex Abhsn

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various injection molding machines available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100 t, screw diameter: 30/35 mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100 t, screw diameter: 25 mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200 t, screw diameter: 25/12+15 mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 35 mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30/25 mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60 t, screw diameter: 25 mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80 t, screw diameter: 25 mm, year of manufacture: 2001. 10) 2x KM SilcoStar 922A, year of manufacture: 2007. Inspection possible on site. Sale of individual machines possible. Some machines are partially cannibalized and/or defective. Dsdpfxjwkiico Abhoun

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Parker Hannifin Instron Hydraulic Power Unit Year of manufacture: 2008 Power: 90 kW Djdpfsq Nyw Aex Abhoun Main fuse: 200 A Operating pressure: 285 bar Flow rate: 165 L/min Tank capacity: 850 L This offer is addressed exclusively to commercial customers as defined by § 14 BGB. No sale to private individuals!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Several older plastic injection molding machines from Arburg, Demag, and Stübbe are available. Dsdex Hz Sbopfx Abheun 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000 kN, shot weight: 140 g, minimum/maximum mold installation height: 180 mm/480 mm, opening stroke: 320 mm, tie bar spacing: 360 mm/355 mm, screw diameter: 40 mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500 kN, shot weight: 207 g, minimum/maximum mold installation height: 320 mm/550 mm, opening stroke: 430 mm, tie bar spacing: 460 mm/460 mm, screw diameter: 45 mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000 kN, shot weight: 130 g, minimum/maximum mold installation height: 200 mm/400 mm, opening stroke: 350 mm, tie bar spacing: 400 mm/400 mm, screw diameter: 38 mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250 kN, shot weight: 25 g, minimum/maximum mold installation height: 225 mm/not specified, opening stroke: 325 mm, tie bar spacing: 270 mm/270 mm, screw diameter: 20 mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850 kN, shot weight: 108 g, minimum/maximum mold installation height: 250 mm/625 mm, opening stroke: 375 mm, tie bar spacing: 320 mm/320 mm, screw diameter: 35 mm, core pulls: 0. An on-site inspection is possible. Sale of individual machines is possible.

Kondisi: siap digunakan (bekas), Clamping force: 350 kN, tie bar distance: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, minimum mold installation height: 180 mm, maximum opening stroke: 350 mm, maximum platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. An on-site inspection is possible. Dujdpfxewaa H Dj Abhjn

Kondisi: seperti baru (mesin pameran), Used/refurbished traction motor for a DH wire rope hoist. Duedpfxjh Up U Do Abhen ATTENTION! We have more than 15,000 Demag parts in stock. For more information, please visit our website or see our other listings.

Kondisi: bekas, Tahun pembuatan: 2006, A Demag Ergotech injection moulding machine, including a Wittmann robot and machine enclosure, is available. 1) Demag Ergotech 50/355-200 injection moulding machine, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, min. mold height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Wittmann W721 handling robot, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety cage. Documentation available. An inspection on site is possible. Dedpowvadnjfx Abhjun

Tahun pembuatan: 1972, Kondisi: siap digunakan (bekas), The system includes (1) crane DEMAG TC 140, year of construction: 1972, lifting capacity: 50t at 3m outreach, slewing angle: 360°, support base: 5500mm, drives: pneumatic, hydraulic, electric, operating hours: 7153h. (2) vehicle Faun LK 910/483-V, operating hours: 1214h. An on-site inspection is possible. Dedeuzx T Ropfx Abhjun

Kondisi: seperti baru (mesin pameran), Used/refurbished hub motor for a DH wire rope hoist Dujdpfxjh Up Uys Abhjn ATTENTION! We have more than 15,000 Demag parts in stock For more information, please visit our website or view our other listings.

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de-hu-001 Dusdpfsxrf Nrjx Abhen