Potongan melengkung KBK

Demag

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. Ksdpfxjfg E Hpo Aahenf - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of equipment that combines a machine built with state-of-the-art components, high efficiency, and the most competitive price. This machine operates on linear motor technology (magnetic cushion), which ensures long-lasting use. The tool assembly with which the machine is equipped allows for the cleaning of the most common PVC profiles available on the market. The machine's base is a strong, stable frame made from structural steel. The control panel is equipped with a PC-class computer. Standard Equipment: Working Arm: - The working arm is driven by a linear motor (no clutches, gears, racks, or lead screws). The linear motor moves at a set distance from the magnetic strip—no friction! - Linear motors for the "X" and "Y" axes are numerically controlled. Air Cushion: - The working arm, weighing several dozen kilograms, is supported during movement along the "Y" axis by a pneumatic actuator that consistently supplies a predetermined pressure, balancing the arm's weight. This solution enables short cycle times without exposing critical machine components to premature wear. Control Panel: - Independent control panel with a PC-class computer. - Operator menu is mapped to function keys, ensuring ease of use in production environments. - Profile outline corrections can be easily made from the control panel (making an adjustment takes about 1–2 minutes for the operator). Other Features: Knedpfx Ajwhu Hhoahof - Automatic workspace cleaning system - Automatic material clamping and centering - Minimum and maximum profile height (workpiece): 40–150 mm - Minimum and maximum profile width: 40–130 mm - Minimum component size (external): 340x400 mm - VP: Transport packaging BASIC SET OF UPPER UNITS: - working unit for tools for cleaning flat surfaces with groove - working unit for cleaning the bead groove surface - drilling unit for sealing gasket BASIC SET OF LOWER UNITS: - working unit for tools for cleaning flat surfaces with groove - working unit for cleaning the sloped bead surface - drilling unit for sealing gasket ADDITIONAL SET OF UPPER AND LOWER UNITS: - working unit with blade for cleaning flat surfaces without groove - working unit with blade for cleaning flat surfaces without groove

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Cutting diameter: 150 mm Knsdpsvwgnwsfx Aahjf Minimum cutting range: 150 mm Saw blade diameter: 400 mm Minimum cut-off length: 420 mm Maximum cut-off length: 4000 mm Space required: approx. 4800 x 1100 x 1500 mm The double miter saw is in very good condition and has seen very little use.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Table length: 4000 mm Table width: 1500 mm Number of torch heads: 1 Control system: SIEMENS 840D Power: 6000 watts Travel speed: 10 m/min Machine weight: approx. 19 t Space requirements: approx. 9.5 x 7.3 x 3.1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 kW is a 5-axis laser machine. Description: Ksdpfxeu N I Ero Aahsnf - Max. sheet thickness: steel: 20 mm / stainless steel: 20 mm / aluminum: 15 mm - Fully enclosed machine housing - TruFlow 6000 laser - ADC cutting head - Positioning laser diode - Pendant control panel, stationary and rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Tahun pembuatan: 2021, Kondisi: baru, de Kedpfx Aehrukisahsnf

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), dear-customers-our-experience-has-shown-that-communication-by-e- mail-usually-unnecessarily-drags-things-out-we-want-to-help-you-q uickly-and-its-better-to-talk-for-three-minutes-on-the-phone-than -to-send-e-mails-back-and-forth-for-three-days-tswc-30-20-dry-spr ay-booth-dimensions-3000-x-2000-mm-w-x-h-fan-mounted-at-the-top-a irflow-10-800-m3-h-motor-2-20-kw-explosion-proof-exhaust-duct-500 -mm-diameter-depth-900-mm-double-filtration-paper-filter-paintsto p-filter-mat-with-clamping-rail-180-eur-net-extra-options-additio nal-costs-paintstop-filter-mat-with-clamping-rail-180-eur-net-sid e-baffles-with-hinges-590-eur-net-photos-may-vary-we-also-offer-c omplete-spray-rooms-with-supply-air-system-heat-exchanger-supply- air-ceiling-piping-etc-just-contact-us Knodpfx Aasfn Nddshjf

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), 2 semi-gantry cranes for indoor operation expandable to full gantry crane track gauge approx. 8.5 m Knodpfx Aaemdrt Sshjf hook path approx. 6.0 m DEMAG single-girder trolley floor control

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: sn. 816, panjang pemakanan sumbu X: 2.600 mm, panjang umpan sumbu Y: 1.300 mm, lebar total: 4.000 mm, panjang total: 3.600 mm, tinggi total: 3.500 mm, masa garansi: 12 bulan, ketinggian potong (maks.): 1.300 mm, persyaratan ruang panjang: 4.200 mm, lebar yang dibutuhkan: 4.500 mm, kebutuhan tinggi: 3.600 mm, Polish manufacturer of machinery and equipment for cutting and processing polyurethane foam with over 25 years of experience is offering a brand-new automatic horizontal cutting machine for sale. Model: TYP PARK The machine features a robust and heavy-duty steel construction. Material cutting is performed by the movement of the cutting frame along the X and Y axes, while the work table remains stationary. The cutting frame is driven by two reinforced timing belts and moves on linear guides along the X axis. In the Y axis (vertical movement of the frame), feed is carried out by two ball screws and linear guides. The machine offers both single-sided and double-sided cutting modes, as well as automatic cut correction in double-sided operation. Machine features: Ksdpfxswq Dvds Aahjnf - Automatic, self-adjusting saw blade tensioning - Stationary table with powered conveyor belt for easy material loading - Automatic cut length measurement - Quick-change system for the saw blade - Automatic material clamping Technical Data: - Cutting width: 2100 mm - Cutting length: 2500 mm The machine is fully enclosed with a safety fence and equipped with safety light curtains in the loading and unloading area. As a manufacturer, we offer installation and service within the EU. The machine is CE-certified. Our product range also includes a variety of machines and systems for cutting foam and mineral wool. We invite you to become acquainted with our offer.

Tahun pembuatan: 2021, Kondisi: baru, Ein-Kopf-Sägeautomat OMC GIOBI 600, neu Maschine auf Lager Kjdpfx Aohrumaeahsnf - Sägeblatt-Ø 600 mm - Hydro-pneumatischer Vorschub - Beidseitige pneumatische Neigung, mit festen Gradstellungen bei 22,5° – 45° – 90°. Zwischengrade mit manueller, mechanischer Arretierung - 2 vertikale und 2 horizontale Spannzylinder - Sprühnebel-Sägeblattkühlsystem - Vollständige pneumatische Schutzverkleidung

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Böcker LH 710 with electro-hydraulic drive, year of manufacture 1990, No. 3216/2, rated load 300 kg, dead weight 255 kg, lifting height 7100 mm, overall height 2200 mm. Knedohh Swkjpfx Aahjf