Silinder hidrolik

DIMTER

Kondisi: bekas, Tahun pembuatan: 2004, Panjang masukan: maks. 5.500 mm Diameter mata gergaji: maks. 700 mm Lebar potongan: maks. 700 mm Tinggi potongan: maks. 120 mm Gergaji crosscut otomatis dengan optimalisasi (gergaji geser) Dimter tipe OptiCut 700 untuk memotong kayu sangat lebar berdasarkan cacat (kapur fluoresen) dan panjang. Dkjdpfxex Eblve Abhsh

Tahun pembuatan: 2019, Kondisi: baru, Creation of a written offer / cost estimate for a Romer powder coating system. Dkedjc Sd D Sjpfx Abhjh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. This robust used gluing press features a pressing table of approximately 2500 x 1300 mm and a stable base frame. It is equipped with a motorized multifunction pusher and an automatic gluing station with a precision glue applicator head. The press is suitable for both softwood and hardwood, ensuring uniform pressure distribution and high vertical pressure for minimal offset. Contact us for further information regarding this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input lengths: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Feed width per stroke: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: The maximum usable pressing width depends on the individual lamella widths • In multi-lane operation, filling widths can vary by max. 15 mm • Minimum contact area per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Pressing table and construction: • Pressing table area: approx. 2500 x 1300 mm • Sturdy base frame with lower pressing table made of stainless steel (polished electrode) • Upper pressure plate with hydraulic "Anti-Reb" motor for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure on the joint and compensate for tolerances • Quick-change stop rule sets for panel thicknesses 19–40 mm; hydraulically adjustable to current filling width • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Rated electrical power for the press (without options): 7 kW • Rated electrical power for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and operator panel • Safety cover Djdpex D I Nrefx Abhjkh Additional equipment • Extended collecting table to 3700 x 1300 mm (with stainless steel wooden support) • Motor-driven multifunction pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue applicator head • Feed system for varying widths • Camera • Washing and rinsing unit for the glue head • Modem with software for online connectivity

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grecon Ultra Finger Jointing Line - Made in Germany - Year of manufacture: 2001 - Suitable for softwood and hardwood - Technical documentation (DTR) available TECHNICAL PARAMETERS: Min./max. element length: 150/1000 mm Min./max. element width: 40/205 mm Min./max. element height: 20/80 mm Min. length / max. width ratio: 2:1 Min./max. starting length: 3000/6100 mm Saw blade motor power: 5.5 kW Dedpfxsrf Ty Ss Abhokh Saw spindle diameter: 30 mm Milling motor power: 22 kW Milling spindle diameter: 50 mm Total line length: 11,500 mm Width: 5,300 mm Total power consumption: 39 kW Air pressure: 8 bar Air consumption: 660 NL/min Suction nozzle diameter: 250 and 100 mm Extraction requirement: 6,150 m³/h at 30 m/s Transport dimensions: 13,00 m x 2,20 m x 2,00 m Weight: 6,700 kg

Kondisi: baik (bekas), Tahun pembuatan: 2013, nomor mesin/kendaraan: 0370250754, 23374 Hydraulic Welding Turntable and Tilter – Three Axes – Welding Manipulator Dksdsv Rbivspfx Abheh Technical Specifications: - Max. load capacity: 3000 kg - Faceplate diameter: 1000 mm - Min. table height (horizontal position): approx. 1070 mm - Max. table height (horizontal position): approx. 1970 mm - Faceplate motorized, rotatable and tiltable - Stepless electric speed control (rotation) - Clockwise and counterclockwise rotation - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 4.0 kW - Handheld remote control for direction of rotation, tilting, and inclination - Required floor space: approx. W 2250 x H 1070 x D 1350 mm - Weight: approx. 2000 kg

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Kami akan menjual lini finger joint kami pada akhir 2025/awal 2026, mulai dari pengurai vakum (gambar 1) hingga mesin press finger joint termasuk gergaji pemotong panjang (gambar 11), kecuali gergaji pemotong cacat tidak dijual. Paket finger joint HK 250 L tahun produksi 1995 (lihat gambar 7), di mana pada tahun 2013 sistem kontrol dan mesin press finger joint telah diganti. Pengaplikasian lem dilakukan dengan sistem pencampuran bawah menggunakan roller lem (gambar 6). Sistem kontrol seluruh lini dan mesin press diperbarui oleh perusahaan Somako. Lini ini masih akan beroperasi hingga akhir 2025 dan dapat dilihat langsung saat produksi. Harga tergantung pada apakah seluruh lini atau hanya sebagian yang dibeli. Komponen individual juga dapat dijual sebagai suku cadang. Dedpfx Aew Uf Tkjbhokh

Kondisi: bekas, Dimter Profipress 2500 L Dsdpfsyhggrox Abhskh Tahun pembuatan: 2006

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, it-hu-01 Dedpfeg Npiwex Abhjkh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Lini produksi sambungan kayu finger joint Grecon ProfiJoint Dodpfx Ajxyq Nmjbhokh Tahun produksi: 2014 Kondisi teknis: sangat baik Data teknis: Panjang elemen jadi: 2100 mm Dengan biaya tambahan, tersedia layanan instalasi, commissioning, dan pelatihan pengoperasian. Kami juga menawarkan layanan purna jual yang berkelanjutan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Grecon Combipact finger jointing line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short timber sections into longer elements using finger joint connections. This process allows the utilization of wood offcuts for the production of high-quality structural components such as beams, scantlings, or panels. Technical specifications: 1. Input length of elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2. Width of elements: - Minimum width: approx. 20-40 mm - Maximum width: approx. 200 mm Dsdpfxeuiz I Rs Abhjkh 3. Thickness of elements: - Minimum thickness: approx. 15-20 mm - Maximum thickness: approx. 80 mm 4. Final length after joining: - Standard maximum length after joining: from 6000 mm 5. Output capacity: - Typical production capacity ranges from 5 to 15 joints per minute, allowing processing of up to 3000 linear meters per hour. 6. Type of joints: - Finger joints, precisely manufactured to ensure durable and strong connections. 7. Pressing force: - The hydraulic press usually applies pressure from several to a dozen tons to efficiently bond the elements. 8. Control system: - PLC control system providing process automation with the ability to set various finger jointing parameters. 9. Gluing: - Grecon Combipact lines are equipped with automated glue application systems that accurately dispense the required amount of adhesive. 10. Power supply: - Standard supply: 400 V, 50 Hz

Kondisi: bekas, Tahun pembuatan: 2002, hu Dkjdexhqqmepfx Abhoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Weinig Dimter OptiCut 350 is an advanced optimizing cross-cut saw, widely used in the woodworking industry for precise length cutting combined with material optimization. This machine provides high-speed, accurate cutting, maximizing raw material yield and minimizing waste. Year of manufacture: 2005 Technical condition: very good Technical specifications: 1. Infeed length of workpieces: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Width of workpieces: - Maximum width: 300 mm - Minimum width: 40 mm 3. Thickness of workpieces: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting rate: 250–350 cuts/min - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 rpm 6. Control system: - CNC control with advanced PLC system for precise cutting process management - Optimization parameters input for maximizing yield and minimizing waste - Touch-screen interface for machine operation and parameter entry 7. Optimization system: - Equipped with defect detection system (manual or automatic defect marking) to eliminate imperfections during cutting - Length optimization functions according to production requirements (e.g., waste minimization, maximizing output of specified lengths) 8. Material feeding system: - Automatic infeed system for workpieces - Integrated conveyors and handling systems for efficient material flow 9. Waste management: - Waste conveying and sorting system to separate defective wood sections - Number of ejectors: 9 pcs 10. Cutting accuracy: - High precision cutting, with accuracy up to ±0.5 mm, depending on wood parameters and machine settings 11. Power supply: - Standard power: 400 V, 50 Hz Additional features: - Automatic defect marking: Operator can mark defects on wood (e.g., knots, cracks); the machine then automatically optimizes cutting to avoid these areas - Safety: Equipped with modern safety features, including interlock sensors and protective covers Dedpfx Aov Dm U Rsbhskh Application: The Weinig Dimter OptiCut 350 is ideal for the woodworking industry, especially manufacturing plants producing structural timber elements, furniture parts, and solid wood processing. Thanks to its optimization features, this machine significantly increases productivity and reduces material losses.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Línea de unión de madera en longitud Weinig Grecon ProfiJoint Año de fabricación: 2009 Estado técnico: muy bueno Datos técnicos: Ancho de trabajo: 40–150 mm Altura de trabajo: 18–50 mm Longitud de trabajo: 6100 mm Fresadora: Longitud del material de entrada: 150–700 mm Ancho del material: 40–150 mm Espesor del material: 18–50 mm Posibilidades de unión: uniones horizontales y verticales Potencia del husillo de fresado: 18 kW Cuchillas de precorte Prensa hidráulica frontal Grecon PJ7/6100: Dkodpfx Asyf N Sljbhoh Longitud máxima del elemento terminado: 6100 mm Diámetro de la sierra: 350 mm Potencia de la unidad de corte: 2,2 kW La máquina fue sometida a una reforma completa y modificaciones en 2022 y funciona en modo automático. Solo se necesita una persona para la operación. Por un coste adicional, posibilidad de montaje, puesta en marcha y formación en el manejo.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jam operasional: 47.000 h, daya laser: 2.000 W, gaya punching: 76 t, berat benda kerja (maks.): 120 kg, jangkauan kerja: 2.500 mm, Perlengkapan: penghadang cahaya keselamatan, unit pendingin, Special equipment: + Thread forming function with thread former breakage monitoring + MultiTool function + Marking/Fast Beading function + Secondary ram + Sensor for parts chute Standard equipment: - Robust C-frame - Coordinate guidance with integrated linear magazine - 21 tool and clamp positions - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact extraction system - Rotatable tool holder - Automatic secondary ram with hold-down device - Automatic parts chute for parts 300x500 mm - Automatic tool changer with 19 stations Djdpfx Aowcq Hgsbhokh - 2 clamps - Good parts container - Punch spray lubrication - Second lubricant container - Scrap slug extraction - Chip bucket - Hydraulic quick disconnect - External control panel - 15" TFT color touchscreen - USB stick interface - 3.5" floppy disk drive - Safety devices - RJ45 network port - Network connectivity - Detailed operating instructions - Remote diagnostics system

Kondisi: sangat baik (bekas), jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Automatic Grecon Dimter Ultra Finger Jointing Line The machine has undergone a complete overhaul. Specifications: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Cutter motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding Table: - Min. board length: 150 mm - Max. board length: 700 mm - Feed rate: Infinitely adjustable Dust Extraction: Chipper extraction nozzle diameter: Ø100 mm Cutter extraction nozzle diameter: Ø150 mm Extraction capacity (flow rate): approx. 2,400 m³/h Pneumatics: Operating pressure: 6 bar Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Dkedpfjuddvaex Abhjh Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Lamella width: 25–160 mm - Finished lamella length: approx. 6,000+15-50 mm - Pressing force: 3–7.5 T (3,000–7,500 daN) Crosscut Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust Extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (flow rate): approx. 400 m³/h Pneumatics: - Operating pressure: 6 bar - Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Work: 1. Cleaning of machine bodies and application of new paint 2. Replacement with new bearings on: main spindle of tenoner; saw spindle of the press; linear bearings on the tenoner table carriage guide; bearings on conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, assembly of a glue tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for cylinders, solenoid valves, and other pneumatic components in the machines; 7. Replacement of gears and double roller chain on the press’s belt-chain feeder. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders; replacement of worn solenoid valves with new ones. 10. Replacement with new operator panels with graphics on the tenoner control cabinet, press control cabinet, and auxiliary press control panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of machine and press controlling PLCs, adaptation of the machine control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the outfeed table pusher; 14. Overhaul of the electrical installation in the control cabinets, modernization, and drawing of the electrical diagram. 15. Installation of guards, mesh guards, necessary labels, safety stickers, manufacturer’s logo, and nameplates. 16. Replacement with new V-belts, inspection of pulleys, gear motors, and motors; 17. Replacement with new limit switches, inductive sensors, and photoelectric sensors (photo-cells) We specialize in finger jointing machines. Installation, commissioning, and operator training within Poland included in the price; in other countries, available at extra cost. We provide service and access to spare parts.