Vertical machining center

DMG MORI DMC 635 V / P

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Control: Heidenhain iTNC 530 Travel X: 635 mm Travel Y: 510 mm Travel Z: 460 mm Spindle speed: 10,000 rpm Spindle power: 13/9 kW Tool holder: SK 40 Pallet size: 800 x 500 mm Cedpjtk Nzbjfx Anpohd Pallet load capacity: 400 kg Tool changer: 30 positions Rapid traverse: 30 m/min 3D probe TS 649 Table probe Rinsing gun Electronic handwheel Linear scales

Kondisi: sangat baik (bekas), Control: Heidenhain TNC 310 With indexing head Travelling distances X/Y/Z: 500/250/160 mm W-axis travel: 480 mm Chsdpfjwkrn Ijx Anped Clamping surface (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table - spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of Manufacture: 2021 Condition: Used, very good, as new; includes new service and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swiveling range: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool shank cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Csdpfx Anjztyrqopehd Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / Rear panel / Sliding safety guard: Light Grey RAL 7035 Machine base / Bed: Basalt Grey RAL 7012 Digital display housing: Blue NCSS 4550-R80B

Kondisi: baik (bekas), Tahun pembuatan: 1988, Diameter penggerindaan 360 mm Panjang penggerindaan 1000 mm Tinggi titik tengah 180 mm Diameter roda gerinda 500 x 203,2 x 50-100 mm Total kebutuhan daya 12 kVA Berat mesin sekitar 4,7 ton Ruang yang dibutuhkan sekitar 3,3 x 2,0 x 1,8 m Csdjzu A Sispfx Anpshd - termasuk filter pita - termasuk roda gerinda

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, en-001 Codpfszbczrsx Anpshd

Tahun pembuatan: 1992, Kondisi: bekas, nomor mesin/kendaraan: 0082-8100115, Technical Description: Passively damped CNC gantry measuring machine with Renishaw indexing head PH10M and TP20 touch trigger probe. Measuring range: X-axis = 1500 mm; Y-axis = 660 mm; Z-axis = 660 mm Year of manufacture: 1992 Accuracy: Chedpfx Ajbig N Donpjd Length measurement uncertainty according to VDI/VDE 2617: U3 = (3.5+4L/1000)µm Permissible temperature range for accuracy specification: 18–24 °C Additional information: System number: 0082-8100115 Software: PC-DMIS version 3.5 Accessories: various probe styli as well as an additional TP20 probe head with medium trigger force

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, NAKAMURA-TOME SC-100X2 Spesifikasi Teknis L-Spindle (Spindle Utama): Kapasitas batang Ø51 mm / 6.000 rpm R-Spindle (Spindle Sub): Kapasitas batang Ø42 mm / 6.000 rpm Fitur Mesin: Dua alat potong secara simultan (pemrosesan bersamaan) Codpfx Aney A Exkopshd Turret bawah + pemesinan 2-sumbu pada R-spindle Siklus Superimposed yang mudah digunakan Perlengkapan Standar: Milling dan poros Y adalah standar Motor L-spindle: 11 / 7,5 kW Motor R-spindle: 7,5 / 5,5 kW Motor milling: 7,1 / 2,2 kW / kecepatan maks. 6.000 rpm Turret bawah dilengkapi penjepit pelepas manual Sistem pemulihan oli pelumas (spesifikasi standar) Unit hidrolik tipe inverter ramah lingkungan

Tahun pembuatan: 2024, jam operasional: 150 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, POROS X (longitudinal) (mm) 7.500 POROS Y (transversal) (mm) 1.280 POROS Z (vertikal) (mm) 640 POROS A (rotasi vertikal-horizontal kepala) -90° ÷ +90° POROS C (rotasi pada poros vertikal kepala) 0° ÷ 360° POROS H (posisi rahang) (TKE 955 HP) (mm) 6.600 POROS P (posisi rahang) (TKE 955 HP) (mm) 6.600 SPINDEL ELEKTRIK Daya maksimum dalam S1 (kW) 11 Daya maksimum dalam S6 (60%) (kW) 13,5 Kecepatan maksimum (putaran/menit) 24.000 Torsi maksimum dalam S6 (Nm) 10,7 Koneksi alat HSK – 63F Diameter mata pisau maksimum 400 mm Chedpfx Anoz Dpdujpjd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 CNC Control – Excellent Condition, CE Compliant! Technical Data: • Year of manufacture: 2006, Machine No. 348013 • Rigid angle table • Infinitely variable spindle speed up to 4,500 rpm • Stepless feed on 3 axes from 0 to 2,000 mm/min Csdpfx Aowrhxfjnpshd • Rapid traverse on X and Y axes: 5,000 mm/min • Z axis rapid traverse: 4,000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quills – SK40 taper • Hydraulic drawbar system • Weight: approx. 1,800 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 15 KVA Equipment and Accessories: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control operation manual and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition. It comes from a facility where it was primarily used sparingly for training purposes only. The CNC control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann in operation at our site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-Compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010 Machine No. 347247 >> Rigid angular table >> Spindle speed: infinitely variable up to 4,500 rpm >> Feed rate: infinitely variable in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping both vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, operation manual for the controller and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in very good condition with only minimal operating hours. It comes from a facility where it was only used for training purposes. The controller is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The ways are lubricated regularly by the central lubrication system. The Kunzmann has been electrically and mechanically tested in our facility. You are welcome to inspect and test the Kunzmann in operation on site. Cjdpfx Anoxupc Uopohd A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 are available. Immediate availability.