Pusat Pemesinan – DMG MORI HSC 20

DMG MORI HSC 20 linear

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar meja: 750 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, 5-axis machining center DMG MORI - DMF 260-7 X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360,000° B-axis: -110° to +110° Table length: 2,900 mm Table width: 750 mm Kdedpfjxuqv Ajx Aa Nsg Table load capacity: 2,150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 330 mm TURNING-MILLING SPINDLE - X/Z travel: 410/400 mm Kodpsuhampsfx Aa Nsdg - Y travel: 200 mm - B-axis stroke: -25°/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 - Spindle speed: 30,000 rpm - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 s - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg MACHINE HOURS - Operating hours: 11,659 h ACCESSORIES - Control: Fanuc 31i model A5 - Absolute linear measuring systems - Coolant tank * with high-pressure pump: 70 bar * Through-spindle coolant supply (IKZ) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece touch probe: Renishaw OMP40-2 - Parts removal - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by a qualified company of the buyer. - Bar puller

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Kdsdjh Rdwxopfx Aa Neg Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories - Quality Made in Germany The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (min.): 16.000 rpm, Mesin dalam kondisi teknis yang baik, - sistem kontrol Heidenhain TNC 426, majalah untuk 20 buah HSK 63, termasuk probe + sumbu ke-4. Kedoxfg Ayjpfx Aa Njdg

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 109.078 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, pergerakan cepat sumbu Z: 45.000 m/menit, model controller: Siemens 840 D, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Hermle C30 U Siemens 840D Jam operasi mesin: 109078 jam, Jam operasi spindle: 22117 jam - Spindel HSK-A63, 10000 rpm Kdjdpfx Aajxcp Slj Nsg - 32 tempat alat - Meja putar SRT 280 mm dengan sistem penjepit terintegrasi SK50 (jika tidak diperlukan, dapat ditutup atau diubah menjadi sistem penjepit titik nol) - Pendingin eksternal - Pendingin internal dengan filter sabuk kertas, 80 bar - Pistol pembilas serbuk - Konveyor serbuk - Modul kontrol manual - Pintu kabin otomatis - 32 tempat alat ditambah 87 tempat tambahan ZM87 - Kompensasi panas - Pengukur alat BLUM (sisi) - Probe pengukur Renishaw - Kontainer serbuk - Lampu status Mesin telah sepenuhnya diperiksa, tersedia protokol geometris dan pengukuran uji kebulatan. Mesin dapat diperlihatkan dan diuji setiap saat dalam kondisi menyala. Kondisi sangat terawat.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Dear Sir or Madam, We hereby offer you a 5-axis CNC machining center "DECKEL MAHO" DMU 50 eVo, used and in good condition. Kdjdpfxew Axahe Aa Njg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, SIEMENS 840D SL control Travel paths: 550 x 320 x 420 mm Ksdpfx Aajwwundo Nedg Swiveling milling head: +100 / -10 ° Spindle taper: HSK A50 Spindle speeds: up to 12,000 rpm Tool changer: 64 positions Rotary spindle: 4,500 rpm NC swivel rotary table with B and C axis Tool breakage monitoring Tool length measurement system 3D probe diverse accessories MARCELS MACHINERY CH

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 500 mm, rentang pengukuran sumbu Y: 700 mm, rentang pengukuran sumbu Z: 500 mm, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, DELIVERY TO UK ONLY Global S Green 05.07.05 HH-AS6-T5, 5° Automatikscher Teilkopf HP-TM Messtaster Standard-Taster-Set PC-DMIS Messsoftware Baujahr 2019 Bitte kontaktieren Sie uns für alternative Konfigurationen. Kjdpfxeu Snthj Aa Nsdg Messbereich: X 500 mm, Y 700 mm, Z 500 mm MPE(E0/E150) (18 °C - 22 °C) 1,5 + L/333

Tahun pembuatan: 2022, jam operasional: 0 h, Kondisi: baru, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double-diaphragm compressed air pump. - New machine - Numerous other variants and special configurations available on request Machine type: Process water centrifuge for solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, coolant filtration, wet blasting systems, ... Advantages: - High output capacity thanks to acceleration forces in the unit exceeding 1,800 times gravity - Recirculating the process water reduces operating costs and is environmentally friendly - Savings on expensive additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of equipment for mass finishing, drying, and process water technology, tailored precisely to your application. From development to production: We supply all of our products from a single source, and all are “Made in Germany.” Ksdpsf Sqfqefx Aa Nedg ----- Please feel free to contact us—we are happy to provide free and non-binding advice. ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first prepare a non-binding quotation for you, which also includes information about our general terms and conditions and right of withdrawal with imprint, prior to purchase/contract conclusion.

Kondisi: baik (bekas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Kdedpfxed Tx Ahj Aa Nog