5-sumbu pusat pemesinan / laser / 3D / HSK-A63

DMG DMU 60 Evo

Kondisi: baik (bekas), Tahun pembuatan: 2013, jam operasional: 59.000 h, Fungsionalitas: berfungsi sepenuhnya, Universal Machining Center DMU 60 eVo Travel X/Y/Z: 600 / 500 / 500 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Spindle speed range (standard): 20 – 14,000 rpm Motor spindle (power): 18.9 / 14 kW (40/100% duty cycle) Tool holder (standard): SK40 according to DIN 69871 NC rotary tilt table: available Clamping surface (table): 600 × 500 mm Swivel range B-axis: −5° to +110° C-axis: 360° Table load capacity: 400 kg Direct measuring systems: available (direct measurement/linear encoder) Table cooling: incl. table cooling (in conjunction with direct measuring systems) Spindle speed (option): 20 – 18,000 rpm (for HSK-A63 tool holder according to DIN 69893) Adaptation of working spindle and tool magazine: deviating from standard Spindle speed (max., further datasheet-screenshot): 24,000 rpm Tool magazine (standard): chain magazine, 30 positions, double gripper Tool magazine (option): tool magazine, 60 positions, chain type with double gripper (deviating from standard) Control (3D control): Heidenhain iTNC 530 HSCI User interface: SmarT.NC Control panel: DMG ERGOline® Control Display: 19" display (as per ERGOline Control) Heat exchanger: for spindle and table Active cooler: for control cabinet Full enclosure: available Signal light: four-color (also mentioned in automation) Probe: Infrared probe, Heidenhain TS 649 DMG Preparation for 3D quickSET toolkits: available 3D quickSET software option: included (per machine) 5-axis machine configurations: only in combination with probe option Handling system preparation: PH 150-8 by DMG Automation (preparation) Nsdpfjyl A Dnex Ahwoku Chip conveyor: scraper belt-type chip conveyor with cleaned slotted screen Internal coolant supply (IKZ): available Paper band filter: 40 bar / 23 l/min / tank 600 l Rotating inspection window: incl. rotating inspection window Purge air: available Linear measuring systems: available Bed wash: available Rinse gun for chip flushing: available Blow air through the spindle center: selectable via M-function Compressed air quality: serviced air with low oil content Mains failure safety package: included Surge protector: available Undervoltage monitoring: with quick stop function Operating mode: 4 Process monitoring: in production Documentation: Documentation-1 German Screen language: German/English DMG / MORI SEIKI Messenger (special offer): Connectivity for first machine (SIE 840D; HDH iTNC530; HDH MillPlus iT) DMG Netservice – client: “Green Light for your Machine”; installation on external PC Automation PH 150-8 with handling system and pallet magazine Automation design: System in automation design, matched to the machine Rotary storage: with 8-pallet mounts Servo axes: 2 servo axes (X-axis, magazine table) Z-axis: pneumatic Gripper: gripper arm/fork Basic programming: basic system programming IPC: IPC with touch panel Job manager: DMG AUTOMATION Jobmanager Operator guidance: graphics-supported operator guidance Signal light: 4-color PH 150-8 integration kit: for DMU 50/70, DMU 40/60/80 eVo linear UPC P chuck: Erowa (UPC P chuck, Erowa) UPC pallets: 320 × 320 mm, incl. clamping studs and pallet coupling, Erowa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 8.185 h, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, en Nksdpfx Ahjx D Dyaewou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 66.600 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Here is a professional, context-appropriate English translation adapted for use on platforms like Machineseeker or TruckScout24: --- We offer: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel paths: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measurement system - Fully enclosed cabin - 3D control - DMG ERGOline Control - Direct measurement systems in NC swivel rotary table, including table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared touch probe, Heidenhain TS 649 - 3D quickSET preparation Nkodpfxsxgnz Tj Ahweu - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 L tank, including rotating inspection window, sealing air, linear measuring systems, bed rinsing - Rinsing gun - Mechanical oil and emulsion mist separator - Blowing air through spindle center - Operating mode 4 - Machine preparation for handling systems, comprising: - Automatic side loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection/deselection of handling system via switch at operator panel - Additional rinsing in working area - Machine preparation for job management - Operator panel on left side - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side hydraulic clamping, 1 circuit: - Hydraulic clamping circuit, 30 – 240 bar, pressure setting via proportional valve control - Includes rotary union upgrade to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h Robot shown in the pictures is not included in the scope of delivery. The machine will be available from approx. October/November 2025. Ball screw drives and linear guides on the X and Z axes have been replaced. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical specifications and details are subject to change and errors. Subject to prior sale! --- If you need the translation in another language, please specify your target language.

Kondisi: bekas, Tahun pembuatan: 2012, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, Traversing paths (X/Y/Z): 600 / 500 / 500 mm NC rotary table: 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems including table cooling Dynamic package: Linear drives on X/Y axes Rapid traverse X/Y/Z: 80 m/min Acceleration X/Y/Z: 10 m/s² Active cooling for main spindle, linear drives, and table Control: Siemens 840D SL Operate Spindle: 20–24,000 rpm, HSK-A63 per DIN 69893 • Tool magazine: Chain-type tool magazine with 60 stations • Tool length measurement and breakage monitoring Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) with paper filter, 40 bar, 231 l/min, 600 l tank, including rotating inspection window, linear system sealing air, bed flushing • Selectable air blast through spindle center via M function, conditioned air with minimal oil content • Electronic handwheel • Spray gun for chip rinsing Nkjdpfjyc Tthox Ahwsu • Enhanced chip flushing • Laminated safety glass for workspace door and side window • Operating mode 4 • High speed settings • Blum HSK-A63 touch probe • Preparation for 3D QuickSet • Optionally, oil mist extraction system • New spindle at 25,800 spindle hours

Kondisi: bekas, Tahun pembuatan: 2014, f5fdd7e1 Nkedpjycxinofx Ahwou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 10.000 kg, PREMIUMLISTAD – DMG MORI DMU 60 eVo (2017) | 5-axlig | TNC 640 | 120 verktygsplatser | Automationsklar | 40 bar Översikt Till salu är ett högspecificerat DMG MORI DMU 60 eVo 5-axligt bearbetningscenter, tillverkat i Tyskland och utrustat med en robust konfiguration för krävande produktion. Maskinen är förberedd för automation, vilket gör den idealisk för obemannad körning och framtida integration av pallhantering eller robot. Viktiga egenskaper • Årsmodell: 2017 • Styrsystem: Heidenhain TNC 640 (ERGOline® Control, 19” skärm) • 5-axligt NC-svivelbord (B-axel -5° till +110°, C-axel 360°) • 120-positions verktygsmagasin • Höghastighetsspindel upp till 18 000 varv/min, SK40 BIG-PLUS • Automationsförberedd + utökad M65-gränssnitt • Geometriskt inspektionsprotokoll från DMG MORI tillgängligt Utrustning & Tillval (som konfigurerad) Styrning / Programvara / Drift • Heidenhain TNC 640, ERGOline® styrning, 19” skärm • Driftläge 4 – processövervakning under produktion • Elektroniskt handratt 5-axligt bord / Mätning • NC-svivelbord 600 × 500 mm • B-axel -5° till +110°, C-axel 360° • Max last: 400 kg • Direktmätsystem (rotationsaxlar) • Renishaw OMP60 optisk IR-mätprob Spindel / Verktyg / Magasin • Spindelgränssnitt: SK40 BIG-PLUS 18 000–20 000 varv/min 35 kW (40 % ED) / 25 kW (100 % ED) • Verktygsmagasin: 120 platser (kedjemagasin med dubbelgripare) • Verktygsbrottsdetektering TRS2 (kontaktlös detektering, lämpad för små diametrar) Kylvätska / Spånhantering / Inslutning • Intern kylmedelstillförsel (IKZ), 40 bar (papperbandsfiltertank 600 l) • Spåntransportör • Utökad spånsköljning (extra spolning av arbetsområdet) • Spåntvättpistol • Spindelcentrerad luftspolning (valbar via M-funktion, konditionerad luft med låg oljehalt) • Roterande skyddsfönster (roterande betraktningsruta) • Olje- & emulsionstångseparering (mekanisk) • Automationsförberedd • Utökat M65-gränssnitt Uppkoppling / Service • DMG MORI Messenger (installationskit för maskinanslutning) Nodpfx Ajygky Tshwsku • DMG MORI Netservice-klient (fjärrdiagnostik via extern PC)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Taille de la table : 600 x 500 mm de diamètre, Charge admissible sur table : 400 kg, Courses XYZ : 600 x 500 x 500 mm, Axe B : -5/+110 degrés, Axe C : 0,001 degré, Avances rapides : 80 m/min, Magasin d’outils 120 positions, Cône de broche : HSK 63, Vitesse de broche : 20 000 tr/min, Commande Siemens 840D eRGOline, Convoyeur à copeaux, Njdownpzaspfx Ahwoku Arrosage centralisé par broche.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, DMG-Mori DMU 60 Evo Linear Kontrol Heidenhain ITNC 530 HSCI Meja putar NC 600 mm x 500 mm Rentang putar sumbu B -5° hingga +110° Sumbu C 360°, termasuk pendinginan meja Kecepatan spindle 20 - 24.000 rpm HSK 63 A Magazin alat dengan 120 slot Probe pengukur inframerah Renishaw OMP 60 Dynamic paket, Pengukuran alat laser IKZ dengan 40/80 bar dengan filter pita kertas 980 l, konveyor serpihan Handwheel elektrik. 3D Quickset ATC, nosel pendingin yang dapat diprogram melalui fungsi M Mode operasi 4 Paket tropis Nkjdpfoxvhtnox Ahwju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG-MORI DMU 60 EVO linear, tahun 2014 Lintasan X/Y/Z: 600 mm x 500 mm x 500 mm Spindel utama SK40 dengan 18.000 rpm Meja putar NC poros B dan C Majalah alat dengan 60 slot Penukar panas untuk spindle dan meja Dynamic package Kontrol Siemens 840 D SL dengan Shop-Mill Probe ukur inframerah Heidenhain TS 649 Pengukuran alat laser Blum Konveyor sabuk geser, IKZ dengan filter kertas dan tekanan 80 bar Separator emulsi kabut oli Nozel pendingin yang dapat diprogram Handwheel elektrik, Mode operasi 4 Nkjdoxvhrwepfx Ahwsu Siklus pembubutan-milling

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, DMG MORI DMU 60 Evo 5-Axis Simultaneous Machining Center (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-Axis Simultaneous Year of manufacture: 2014 Condition: Good, used, fitted with new spindle in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h Njdpowp Ic Eefx Ahweku CNC control: Heidenhain ITNC 530 Condition: Used, operational Travel (X/Y/Z): 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20-14,000 rpm Tool magazine: 30 positions Tool holder: SK40 NC rotary tilt table: 600 x 500 mm Through-spindle coolant (IKZ): 40 bar with belt filter system Touch probe: TS649 Documentation included