Pusat permesinan universal
DMG DMU 60 P

tahun pembuatan

2004

Kondisi

Bekas (berfungsi sepenuhnya)

Lokasi

Jerman

Pantau lelang

Data mesin

Nama mesin:: Pusat permesinan universal

Pabrikan:: DMG

Model:: DMU 60 P

Nomor mesin:: 1116 000179 3

Tahun pembuatan:: 2004

Kondisi:: siap digunakan (bekas)

Fungsi:: berfungsi sepenuhnya

Jam operasional:: 9.848 h

Rincian teknis

Jarak pergerakan sumbu X:: 600 mm

Jarak lintasan sumbu Y:: 700 mm

Jarak gerak sumbu Z:: 600 mm

Kecepatan rotasi (maks.):: 12.000 rpm

penyediaan

Lokasi:: Jerman – Jarak: sekitar 11.152 km

Ketersediaan:: segera setelah lelang berakhir

Syarat pengiriman:: FCA

Biaya pembongkaran dan pemuatan:
€1.000,00 (wajib)

Pengambilan di lokasi:
gratis

Biaya pengiriman:

Deskripsi

TECHNICAL DETAILS
Torque available at the spindle: see diagram in PDF
Motor power at 100% duty cycle: see diagram in PDF
Motor power at 40% duty cycle: see diagram in PDF
Spindle speed infinitely programmable: 20-12,000 rpm
Speed in setup mode: 20-800 rpm
Magazine stations: 30 pcs

Travel Measuring System
Resolution X, Y, Z axis: 0.001 mm
Input increment X, Y, Z axis: 0.001 mm
Positioning tolerance X, Y, Z axis: 0.010 mm

Feed Drive
Motors: AC brake motors for X, Y, Z axis
Feed rate X, Y, Z axis, infinitely programmable: 20-15,000 mm/min
Rapid traverse X, Y, Z axis: 60 m/min
Setup mode X, Y, Z axis: 20-2,000 mm/min

NC Rotary Table
Clamping surface: Ø630 mm
Slot spacing: 63 mm
Number of T-slots / size: 9 / 14 H7
Centering hole: Ø50^H6 mm
Holding torque at 100% duty cycle A-axis: 3,866 Nm
Holding torque at 100% duty cycle C-axis: 6,008 Nm
Max. table rotation A-axis: 7.3 rpm
Max. table rotation C-axis: 7.0 rpm
Swivel range A-axis: ±45 / 30°
Rotation range C-axis: n x 360°

Tool holder: SK40

Operating Hours
Power-on hours: 35,099 h
Spindle hours: 9,848 h

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

19517476-01.pdf

Pemrosesan pembayaran

Biaya tambahan pembelian:: 18 %

Syarat pembayaran:: 100 % pembayaran di muka

Metode pembayaran:: Transfer bank

Faktur akan diterbitkan sebesar tawaran tertinggi ditambah biaya pembongkaran/pemuatan dan biaya pengiriman jika ada, serta biaya tambahan pembelian dan PPN yang berlaku.

Rincian penawaran

ID iklan:: A19517476

Nomor referensi:: AUC-2507028

Pembaruan:: terakhir pada 21.07.2025

Penawaran eksklusif:: hanya tersedia melalui lelang

Mengamati

Kontak

Kontak person: Cedric Schuhmann

ID Mesin: 19517476

+49 201 8... iklan

Telepon: +49 201 857 861 77

Perlindungan pembeli Machineseeker

Pembayaran aman melalui rekening escrow

Penjual yang diperiksa secara ketat

Dukungan pribadi dan multibahasa

Pembayaran harga pembelian dilakukan hanya setelah penyerahan barang.

kunjungan

Bisa dilihat langsung

Machineseeker pada dasarnya menyarankan untuk memeriksa mesin bekas.

Semua data diberikan berdasarkan pengetahuan dan itikad terbaik – silakan periksa sendiri di lokasi.

Penyedia

Penjual profesional komersial
Sejak 2013 di Machineseeker

Hessen Jerman Jerman

Jarak: sekitar 11.152 km

Mesin Anda bisa ditempatkan di sini

Lelang dengan nomor 1

Anda menjual hanya dalam beberapa minggu!

Anda menjual pada harga tertinggi!

Anda menjual tanpa biaya tetap dan risiko!

atau hubungi +49 201 857 861 10

Membahas kerja sama

Iklan-iklan ini juga mungkin menarik bagi Anda.

iklan kecil

Jerman

12.681 km

Pusat permesinan - universal
DMGDMU60 P

Hubungi

iklan kecil

Bad Oeynhausen

11.110 km

Pusat mesin
Kao MingKMC 4000 SV

Hubungi

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.230 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, kecepatan pemakanan sumbu X: 12 m/menit, laju pemakanan gandar Y: 12 m/menit, laju pemakanan sumbu Z: 12 m/menit, lebar meja: 2.400 mm, panjang meja: 4.000 mm, beban meja: 14.000 kg, berat keseluruhan: 38.500 kg, kecepatan spindel (min.): 5.200 rpm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, X-axis travel: 4,230 mm Y-axis travel: 2,700 mm Z-axis travel: 700 mm Feed rate X-axis: 12 m/min Feed rate Y-axis: 12 m/min Feed rate Z-axis: 12 m/min Table length: 4,000 mm Table width: 2,400 mm Spindle speed (min.): 5,200 rpm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Distance between columns: 2,800 mm Nsdpjvt S Eajfx Ab Eodd Table load capacity: 14,000 kg Milling head position: Vertical Max. workpiece weight: 14,000 kg Total weight: 38,500 kg Equipment: - Infinitely variable spindle speed - Chip conveyor - Internal coolant supply - Tool magazine for 40 tools - Tool holder SK 50 - Heidenhain TNC 530 control system Errors in technical data excepted. The scope of accessories is limited exclusively to and as described in the text of the article description. Any other accessories shown – e.g. for illustration purposes – are expressly not included. The machine is sold as is, without warranty or guarantee. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Lihat detail

iklan kecil

Pusat permesinan CNC 5-sumbu DMG MORI DMU 60 P

Burgoberbach

11.050 km

Pusat permesinan CNC 5-sumbu
DMG MORIDMU 60 P

€15.000

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 7.500 kg, For sale: CNC 5-axis machining center by DMG, model DMU 60 P The machine is fully functional and ready for immediate operation. In 2021, a new spindle was installed; all maintenance work has been performed. Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: up to 12,000 rpm Spindle drive power: 15 / 10 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 30 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Machine weight approx.: 7.5 t No fixtures or vises included in this offer. Transport and loading can be organized on request at an additional cost. Europe-wide service available. Prices are subject to VAT. Nsdpfx Abewbhq He Ejdd Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Lihat detail

iklan kecil

Mesin penggiling permukaan LGB R200120SM

Courbevoie

11.649 km

Mesin penggiling permukaan
LGBR200120SM

Hubungi

Kondisi: belum diuji (bekas), Tahun pembuatan: 2001, panjang penggilingan: 2.200 mm, lebar penggilingan: 1.240 mm, tinggi total: 630 mm, diameter roda gerinda: 450 mm, berat keseluruhan: 9.800 kg, Overall dimensions: 2200 x 1240 x 630 mm Magnetic table: 2000 x 1000 mm Ndedpfowplfdsx Ab Esd Grinding wheel: 450 x 80 x 127 mm Maximum table load: 3000 kg Filtration tank Machine weight: 9800 kg

Lihat detail

iklan kecil

Pusat permesinan 5 sumbu 2300 mm Hedelius Tiltenta T6 / 2300

Babberich

11.297 km

Pusat permesinan 5 sumbu 2300 mm
HedeliusTiltenta T6 / 2300

Hubungi

Kondisi: baik (bekas), jarak pergerakan sumbu X: 2.300 mm, jarak lintasan sumbu Y: 630 mm, jarak gerak sumbu Z: 810 mm, manufacturer: Hedelius type: Tiltenta T6-2300 control: Heidenhain iTNC530 year of manufacture: 2005 Optional NC rotary table Working area: 750 x 550 mm Table load: 800 kg Table torque: 1600 Nm Table rotation speed: 22 rpm 2 x 850 mm pendulum jobs Heidenhain HR 410 handwheel Heidenhain iTNC530 Specifications Metric | US Standard X-axis travel: 2300 mm Y-axis travel: 630 mm Z-axis travel: 810 mm A-axis: -92° to +92° B-axis: 360.000° Table length: 2900 mm Table width: 630 mm Ndodpfx Abswrq Upo Ejd Table load: 2000 kg Rapid traverse X-axis: 60000 mm/min Rapid traverse Y-axis: 60000 mm/min Rapid traverse Z-axis: 60000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 26.5 kW Spindle speed: 12000 rpm Tool changer: 40 positions Internal coolant supply: 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Dimensions (estimated) Length: 7500 mm Width: 3250 mm Height: 3250 mm Weight: 16800 kg Please note: The information on this page has been compiled to the best of our knowledge, and wherever possible, sourced from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, this information does not constitute a representation or contractual terms. We recommend that you verify all important details.

Lihat detail

iklan kecil

Pusat permesinan - universal DECKEL MAHO DMC 100 U duoBLOCK

Oelde

11.164 km

Pusat permesinan - universal
DECKEL MAHODMC 100 U duoBLOCK

Hubungi

Kondisi: bekas, Tahun pembuatan: 2005, x-travel 1,000 mm y-travel 1,000 mm z-travel 1,000 mm Control system: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Ndedpfxjwf Rgfe Ab Esd Tool holder: HSK-A63 Tiltable B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight: approx. 27.0 t Space requirements: approx. 8.0 x 7.0 x 3.4 m 5-Axis CNC Universal Machining Centre DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Lihat detail

iklan kecil

Kirchen (Sieg)

11.207 km

Pusat mesin
HAASEC-1600

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 1.626 mm, jarak lintasan sumbu Y: 1.016 mm, jarak gerak sumbu Z: 813 mm, daya nominal (semu): 22 kVA, model controller: HAAS, lebar meja: 914 mm, panjang meja: 1.626 mm, beban meja: 4.536 kg, diameter meja putar: 760 mm, berat keseluruhan: 13.611 kg, kecepatan spindel (maks.): 6.000 rpm, Perlengkapan: konveyor serpihan, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-station tool changer (BT50) Full 4th axis Ndjdovgmr Ijpfx Ab Eed Spindle & gearbox replaced in 2017 Single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (In case of same-day delivery of our new machine)

Lihat detail

iklan kecil

Pusat permesinan - universal DECKEL MAHO DMC 80 FD

Grüsch

11.156 km

Pusat permesinan - universal
DECKEL MAHODMC 80 FD

Hubungi

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 – 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Max. tool weight: 10.00 kg Total connected load: 60.00 kW Nsdpfx Aew Df A Ssb Eodd Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.

Lihat detail

iklan kecil

Pusat pemesinan vertikal +GF+ Mikron Charmille Mikron VCE 600 pro

Flémalle

11.380 km

Pusat pemesinan vertikal
+GF+ Mikron CharmilleMikron VCE 600 pro

Hubungi

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan pemakanan sumbu X: 16 m/menit, laju pemakanan gandar Y: 16 m/menit, laju pemakanan sumbu Z: 16 m/menit, daya nominal (semu): 16 kVA, produsen pengendali: Heidenhain, model controller: ITNC 530, beban meja: 800 kg, berat keseluruhan: 5.300 kg, kecepatan spindel (min.): 10.000 rpm, jam operasional spindle: 8.500 h, daya motor spindle: 12 W, hidung spindel: ISO B40, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe. Ndodpfxjwxrgte Ab Esd Video available upon request. Delivery and installation by our team possible.

Lihat detail

iklan kecil

Pusat permesinan universal DMG MORI DMU 80P duoblock

Auw bei Prüm

11.325 km

Pusat permesinan universal
DMG MORIDMU 80P duoblock

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, torsi: 121 Nm, produsen pengendali: Siemens, lebar meja: 700 mm, panjang meja: 900 mm, beban meja: 1.400 kg, kecepatan rotasi (min.): 20 rpm, kecepatan rotasi (maks.): 18.000 rpm, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 32.000 h, pasokan pendingin: 40 batang, hidung spindel: HSK63A, jumlah slot dalam magazin alat: 30, panjang alat: 350 mm, diameter alat: 100 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance carried out according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Nodpsw Ht Ibefx Ab Ejdd Swivel head (controlled B-axis) Direct measuring system in X/Y/Z (glass scales) Chip conveyor Extraction unit NC rotary table Tool magazine, 30 positions Heidenhain probe BLUM laser Handwheel Rotating viewing window ICS, 40 bar Chip flushing Operating mode 4

Lihat detail

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.