Mesin pemotong laser

DNE - member of Bystronic group D-Soar Plus 2040 - 12000 Watt

Laser power: 12,000 watts
Working area (laser operation): 4000 x 2000 x 270 mm
Positioning speed X/Y/Z: 200 m/min
Simultaneous: 280 m/min
Max. workpiece weight: 3,000 kg
Max. mild steel: 30 mm
Max. stainless steel: 30 mm
Max. aluminum: 25 mm
Max. copper: 10 mm
Max. brass: 20 mm
Length: 12,500 mm
Width: 3,650 mm
Height: 2,620 mm
Machine weight: 18,000 kg

Standard equipment
Main Components
1. Fiber laser source: D-Soar (_CE&UL) / Raycus
2. Cutting head: Bystronic DNE Copyright
3. Cutting software: Bus system control Hypcut FSCUT 8000C
4. Rack and pinion (X & Y Axis): Herion M3
5. Shuttle table: Parallel exchange table (double level)
Gbjdpfx Adev Uz Tijqsu
6. Ball screw: TBI (Taiwan)
7. Linear guide: Won (South Korea)
8. Reduction gear: Neugart (Germany)
9. Servo drive and motor: Inovance or Schneider
10. Machine body: Welded machine bed
11. PC: I7 CPU, 8GB RAM, 120GB SSD, 10kW
12. Monitor: 21.5" XC-2209CMDR capacitive touchscreen
13. Proportional valve: Felton low pressure 10kW
14. PLC hardware: Schneider
15. Solenoid valve: High pressure – CEME; Low pressure – Airtac
16. Gantry: Cutting bridge made of aerospace-grade aluminum, formed by steel pressure casting
17. Chiller: S&A customized
18. Electrical control cabinet: Independent control cabinet (Bystronic DNE Copyright)

Electrical connection (machine including laser source and chiller)
The voltage supplied by the power utility must comply with EN 50160 and IEC 60364-1; a stable voltage is required for consistent performance. The power supply must not show voltage fluctuations across the entire network tolerance, such as those generated by spot welding systems. If a reliable power supply cannot be ensured at the installation site, the system must be equipped with a transformer and/or voltage stabilizer.

Machine power supply, including laser module:
Three-phase & PE; Supply system: TN
Main frequency: 50/60 Hz
Supply voltage: 3 x 380 V
Max. permissible voltage fluctuation (50 Hz): +/- 10%
Max. permissible voltage fluctuation (60 Hz): +6/-13%
Fuse: 150 A
Machine: 22 kW
Hydraulic shuttle table: 15 kW
Exhaust extraction: 7.5 kW
Resonator: 36 kW
Chiller: 15 kW
Power consumption, total*: 80.5 kW
Power factor cos(φ): 0.83
Average power requirement: 30.75 kW
* Values measured at full laser capacity and ambient temperature of 20°C; based on a typical average material mix.

Compressed air (machine, laser source, chiller, extraction system)
Compressed air quality must comply with ISO 8573-1:2001. To avoid contamination risk from the compressor, an oil-free screw compressor with a downstream air treatment unit (air dryer) is required.
Min. supply pressure at service module: 20 bar
Max. consumption: 1.05 m³/min
Max. inlet air temperature at service module: 43°C

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.