Mesin pemotong laser

DNE Laser - Member of Bystronic group DNE Soar plus

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard configuration with Flow Control, Thermal Control, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features add approximately €400 in value at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical; in our opinion, the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, Long – Each machine is supplied with a 5-meter-long connection hose package between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach work areas! The connection hose is neatly stored on a hook at the side of the unit. (Hooks manufactured by us) ➤ Fronius Large Trolley – Arguably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With Up/Down current regulation on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This set can weld nearly all materials, including aluminum, steel, and stainless steel (V2A). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in the sheet metal trade. Other options available at extra cost, e.g. Fronius Aw4000/Aw5000 Job Master Torch Package (torch with display) + €550.00 Iodpfx Afswbil Seijtf ----- IMMEDIATELY AVAILABLE PROPER INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? To clarify, we purchase almost-new pre-owned machines, disassemble, check everything thoroughly, replace any wear parts as necessary, and only after successful test welding release the machine for sale. "All" machines are clean and have no burn marks on the displays, nor are they riddled with burn holes or dents! You are purchasing an item from us that is also ⭐visually appealing and not completely worn down! ►►►Do we get an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment methods are available? Advance payment or cash on collection in person. ►►►Why buy from us? We are professionals specializing in this Fronius welding machine series and always keep 60–80 machines in stock – exclusively Fronius, no other brands! We know these machines inside and out and do not sell anything we are not familiar with.

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Itedpfx Aet Hw Iisfiof Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Iedpfx Aed Ixadjfijtf Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: belum diuji (bekas),

Kondisi: baru, Tahun pembuatan: 2026, Table length (raw material): 6500 mm Table width (max. tube diameter): 230 mm Number of torch heads: 1 Control system: CNC Workpiece weight: 300 kg Traverse speed: 91 m/min Machine weight: 5750 kg Space requirement (approx.): 12900 x 2370 x 2650 mm Tube laser with T-Loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius high-end laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of chuck clamping force 6. Follow-servo blanking clamp 7. Support for combined clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic pipe edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI Internet connectivity 16. Water chiller Ijdowh Uldepfx Afijtf 17. Extraction unit 18. Set of wear parts 19. Auxiliary feeding system T-Loader: - One-click setup - Material shortage alarm - Automatic loading - Scratch-resistant tube handling - Host safety lock - Tube size range: * Round tube: 20 - 220 mm * Square tube: 20 - 220 mm * Rectangular tube: 220 mm ≥ side length ≥ 20 mm - Max. tube weight: 300 kg - Tube loading length range: 4500 mm - 6500 mm - Max. loading weight: 1800 kg CUTTING CAPACITY: MILD STEEL: 16 mm STAINLESS STEEL: 12 mm ALUMINIUM: 10 mm WALL THICKNESS MILD STEEL* (mm) If Ø < 50 mm: WT = 1.2 If Ø = 50 mm: WT = 2.5 % × Ø Max. finished part length: 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 49.641 h, panjang langkah: 200 mm, kapasitas tangki oli: 100 l, jarak pergerakan sumbu X: 300 mm, produsen pengendali: Bystronic, lebar kerja: 60 mm, gaya tekuk (maks.): 40 t, kecepatan pengukur belakang poros R: 500 mm/dtk, Perjalanan back gauge sumbu R: 100 mm, jarak pergerakan pengukur belakang sumbu Z: 955 mm, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, penghadang cahaya keselamatan, perlindungan jari, de Ijdoxtf A Iopfx Afietf

Kondisi: baru, Tahun pembuatan: 2025, de Ijdog Du Aqepfx Afijtf

Tahun pembuatan: 2024, Kondisi: baru, This laser cutting machine is capable of processing sheet metal up to 12 mm thick. The Wattsan 1235 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working area of 1300x2500 mm. The precision Wattsan 1325 S is equipped with load-bearing rollers to facilitate material feeding. The S-Series laser metal cutter reaches a maximum traverse speed of 120 meters per minute. The laser output can be up to 6 kW. The frame is made of steel. For more details, please contact our managers! Wattsan Features Working area: 1300x2500 mm Laser power: up to 6000 W Weight: 1640 kg Iedsiicwzjpfx Afietf Virmer not only offers premium machines, but also service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. Furthermore, Wattsan device owners receive lifetime online support. Based in the Netherlands, Virmer operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding systems, marking machines, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and is constantly evolving with the help of its customers. Thanks to their feedback, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and powerful, so you can take your business to the next level. CONTACT US VIA EMAIL OR PHONE! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK If you are looking for a suitable laser or CNC milling machine, we are at your service. You will find a wide selection of laser machines and accessories with us: CO2 laser machine; metal laser cutting machine; metal laser cutter; fiber laser for metal; fiber laser engraving machine for metal; CNC metal milling machine; wood milling machine; CNC milling machine; laser engraving machine; laser engraver; laser cutting machine for plywood; metal laser cutter; CNC milling machine; laser marking machine; lenses; chillers; cooling systems for machines; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machines.

Kondisi: baru, Tahun pembuatan: 2025, fr Itsdpfxjhwrk Ts Afisf

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), 1 x centrifuge Aryma / Rimann 2.5 LIT Year of manufacture: 1998 Itsdpfxeigni Is Afiof with open basket in excellent visual and technical condition Technical specifications: Max. load: 3 kg / 2.5 l The machine can be inspected under power at any time.