Mesin bor radial cepat

Donau Danuflex 145

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, en Ledoyv A Ucjpfx Alkjrk

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool stations: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control system: Heidenhain TNC 426. An on-site inspection is possible. Lredpfx Alsv Uqb Njksk

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Lrodpfeynt Ucjx Alkjk Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Lrodpeylnpiofx Alkjk Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 2001,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Lrjdpoyhdvkofx Alkjk Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MT 4) • Infinitely variable speed setting • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left side of machine base • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose to table top min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capabilities Drilling capacity (solid material) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Lredpfxsx Uwpxe Alkek Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, lebar meja: 1.100 mm, panjang meja: 3.200 mm, jumlah slot dalam magazin alat: 60, DMG MORI DMF 260/11 LINEAR 5 AXIS MACHINING CENTER (Champion) TECHNICAL SPECIFICATIONS (MACHINE IN GOOD CONDITION) Brand: DMG MORI Model: DMF 260/11 Linear 5 Axis (Champion) CNC: Heidenhain iTNC 530 Table size: 3200 x 1100 mm Travel X / Y / Z: 2600 X 1100 X 900 mm Lrjdpfoytrzxox Alkjk Table load capacity: 4,000 kg Rotary table capacity: 1,200 kg Machine weight: 27,750 kg (27.5 t) Spindle taper: DIN 2080 A-50 (ISO 50) Tool magazine capacity: 60 positions Spindle speed: 10,000 rpm Blum tool measurement system Additional Equipment and Performed Maintenance - Internal and external air and coolant supply through spindle via M function (40/80 bar) - Upper external air cooling (chip removal for higher volume via M function) - Head vibration control module - Preventive maintenance up to date: oils, filters, coolant changed according to manufacturer's guidelines or as needed - Y-axis spindle replaced at 9,256 operating hours - Belleville washers replaced at 13,903 operating hours - Mechanical tool probe with possibility to install Blum laser (includes laser) - DMG probe - 3D QuickSET - Coolant gun - Linear drive on X axis - Basic machine dimensions: Length mm: 8,600 Width mm: 5,800 Height mm: 3,200 - Chip conveyor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Amada HFE M2 220t 4m, 8-Achsen Abkantpresse Baujahr: 2012 Presskraft: 220 Tonnen Max. Biegelänge: 4.280 mm Ledpfx Alev S U Izjkork Hub: 200 mm Anfahrgeschwindigkeit: 1 - 100 mm/s Biegeschwindigkeit: 1 - 10 mm/s Rücklaufgeschwindigkeit: 1 - 100 mm/s Ölvolumen: 195 l Motorleistung: Gewicht: 17.450 kg Abmessungen: Maschinenlänge: 5.070 mm Maschinentiefe: 2.075 mm Maschinenhöhe: 3.085 mm Ständerabstand: 3.760 mm Oberwangenbreite: 180 mm Tischhöhe: 960 mm Gesamthöhe offen: 470 mm Ausladung: 420 mm

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication Lrjdpfx Aolgvkislkjk - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm