Truk palet

Doosan LEDH 20

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 911 h, kapasitas angkut: 2.000 kg, jenis bahan bakar: listrik, panjang garpu: 1.150 mm, jenis penggerak: Elektro, Low-lift pallet truck Load centre: 600 mm Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Vulkollan Rear tyres type: Vulkollan Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: HSR Gjdpfov N R Dyox Ag Reuk Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer a wide range of forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM 4.004 regulations. Please contact us via email or by phone. You can also find us at hsr-gabelstapler. We are happy to purchase your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at attractive conditions are available upon request. We are happy to provide you with expert and comprehensive advice on our vehicles. Impulse control, Non-marking tyres,

Kondisi: bekas, Tahun pembuatan: 2016, Travel path - X 800 mm Guodpfswq S Alsx Ag Rek Travel path - Y 450 mm Travel path - Z 510 mm Control: HEIDENHAIN TNC620 Table size (L x W): 1,000 x 450 mm Number of tool changer stations: 30 Vertical machining center | DOOSAN DNM 4500 equipped with a 30-position tool changer, internal coolant supply (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. We are happy to share a machine video at the factory location upon request. Technical data for the machine will follow shortly. ----- #Tags: DNM4500 | DNM-4500

Kondisi: bekas, Max. turning diameter: 360 mm Turning length: 505 mm Control system: Mazatrol SmoothC Max. swing diameter over bed: 660 mm Max. swing diameter over cross slide: 255 mm Max. bar diameter: 80 mm Spindle speed range: 35 - 4000 rpm Spindle torque: 358 Nm X-axis travel: 225 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 605 mm Rapid traverse Z-axis: 33 m/min Spindle nose: A2-8'' Spindle bore: 91 mm Spindle passage: 80 mm Milling spindle speed (driven tools): 5000 rpm Max. torque at milling spindle: 47 Nm Drive power - milling spindle: 5.5 kW (40% duty cycle) Tailstock quill taper: MT 5 Tailstock travel: 565 mm Max. axial pressure: 5.0 Nm Turret: 1 Number of tool stations: 12 (driven) Turning tool cross-section: 25 x 25 mm Tool holder: BMT Compressed air connection: 5 / 160 bar / l/min Operating voltage: 400 V Coolant tank: 180 l Main motor power: 18.5 kW (30 min duty cycle) Rated power (100% continuous duty): 15 kW Machine weight: approx. 6 t Floor space: approx. 3.6 x 2 x 1.8 m Machine incl. the following special equipment: Side-mounted chip conveyor (right) Productivity package C – Special as per stock machine This package includes: High-performance coolant system (1.1 kW), max. flow rate 17.6 l/min Preparation for chip conveyor (side) Automatic tool eye Gedpev Dxw Rofx Ag Rsuk STANDARD EQUIPMENT Transformer for the European market Linear guide system with guide carriages SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard color CE marking, metric, 50 Hz C-axis input accuracy: 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MT5 SAFETY DEVICES Operator door interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety measures according to international standards COOLANT SUPPLY Grundfos coolant pump, type MTA (0.25 kW / 7.6 l/min) Complete coolant system Automatic shut-off via circuit breaker MEASURING SYSTEM Absolute positioning system NUMERICAL CONTROL Synchronised tapping with milling spindle Relocation detector Mazatrol SmoothC 10.4" color monitor User macro (600 variables) EIA/ISO input function Background toolpath verification Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function LAN interface Various tool holders - All dimensions, weights and performance specifications non-binding - - Used machine without warranty -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Takisawa TMM 250 3 turning-milling center, year 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Maximum spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axes Swing diameter: 780 mm Maximum turning diameter: 350 mm Maximum turning length: 1,300 mm Left chuck diameter: 250 mm Right chuck diameter: 200 mm Upper tool carrier with Y-axis (260 mm) and B-axis (230° / ±115°) Complete with 30-position tool changer Lower tool turret with 15 driven positions – all stations powered Fully simultaneous 5-axis machining with turning/milling capability Tool changer with 30 tool stations Workpiece magazine positioned on the right side of the machine, portal handling Driven tools on the turret C-axis on left and right spindle Chip conveyor Internal coolant supply through the milling spindle, 20 bar Guedpfsrt Ip Nex Ag Rek Due to administrative reasons (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 100 mm, diameter roda gerinda: 350 mm, berat benda kerja di antara senter: 20.000 g, jarak antara pusat: 400 mm, jenis arus masuk: tiga fasa, lebar roda gerinda: 30 mm, kecepatan spindel (maks.): 1.200 rpm, kecepatan spindel (min.): 30 rpm, panjang umpan sumbu Z: 420 mm, daya motor spindle penggiling: 3.000 W, berat keseluruhan: 1.600 kg, tahun perombakan terakhir: 2025, tegangan masuk: 400 V, de-DE Gedswt Tgwspfx Ag Rjuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 1.233 mm, diameter pembubutan: 420 mm, MAZAK Model QT SMART 350 M U1250 Year: 2014 Mazatrol Smart Control Max. turning diameter: 420 mm Max. swing diameter: 720 mm Max. turning length: 1,233 mm Spindle motor: 30 kW Max. spindle speed: 3,300 rpm Full C-axis Max. bar capacity: 102 mm Spindle nose: A2-11 12-position turret 12 stations for driven tools Driven tools: 7.5 kW Max. speed of driven tools: 4,000 rpm Travel: X-axis: 265 mm Z-axis: 1,233 mm Tailstock: 1,265 mm High-pressure coolant, 15 bar Gsdpfern Txkox Ag Rjuk Tooleye Mayfran chip conveyor, right-hand discharge Kitagawa B210 3-jaw chuck, diameter 254 mm Tailstock, MT5 Set of tool holders: 8 static holders + 2 driven tool holders Weight: 7,200 kg LxWxH: 3,770 x 1,910 x 1,900 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, daya motor spindle: 15.000 W, kecepatan spindel (min.): 5.000 rpm, jarak pergerakan sumbu X: 157 mm, jarak lintasan sumbu Y: 35 mm, jarak gerak sumbu Z: 464 mm, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 1.885 mm, panjang total: 3.675 mm, lebar total: 2.258 mm, berat keseluruhan: 9.000 kg, CNC control: Fanuc 18i-TB Capabilities Travel X-axis mm: 157.5 Travel Y-axis mm: 35 Travel Z-axis mm: 464.8 Travel B-axis mm: 600 C-axis: 360º (0.001º) Turning length mm: 399 Max. turning diameter mm: ø 190 Distance between spindle noses mm: 750 Bar working capacity mm: 52 Upper turret Number of tool stations: 12 Max. driven tool speed rpm: 6,000 Driven tool power kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool stations: 12 Max. driven tool speed rpm: 6,000 Driven tool power kW: 5.5 / 3.7 Milling function: Both turrets Number of upper turrets: 1 Main spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 15 / 11 Sub spindle Max. spindle speed rpm: 4,500 Spindle drive power kW: 11 / 7.5 Equipment Parts catcher Bar loader ILS – RBK Gjdpoxiwnnofx Ag Reuk Machine operation time: Nominal kVA: 67.2 Base machine: Dimensions/Weight Length mm: 3,675 Width mm: 2,258 Height mm: 1,885 Weight kg: 9,000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 9.738 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.020 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: Fanuc 31 iB, lebar meja: 600 mm, panjang meja: 1.200 mm, beban meja: 500 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 18 W, jumlah slot dalam magazin alat: 48, Hersteller Matsuura Modell VX-1000 Gujdswtfu Hopfx Ag Rsk Baujahr 2016 Steuerung Fanuc 31iB Daten: Tischgröße 1200 x 600 mm Tischbelastung 500 kg Verfahrwege X/Y/Z 1020/610/610 mm Eilgang X,Y/Z 40,40/36 m/min Spindelaufnahme ISO 40 Spindelantriebsmotor 18,5/15 kW AC Spindeldrehzahlen 40 – 15.000 min⁻¹ Werkzeugaufnahme BT-40 Big Plus Werkzeugmagazinplätze 48-fach Werkzeugdurchmesser mit/ohne Nebenwerkzeug 96/150 mm Werkzeuglänge 350 mm Werkzeuggewicht 10 kg Maschinenabmessungen (LxBxH) 2,52 x 2,85 x 3,4 m Maschinengewicht 8.000 kg Ausstattung: Späneförderer, Kühlmittel durch die Spindel 20 bar, 8 zusätzliche M-Funktionen, Renishaw Messtaster OMP 60, Werkzeugbruchkontrolle.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Travel paths (X, Y, Z): 742 x 435 x 510 mm Number of spindles, vertical drilling head / pcs Number of spindles, horizontal drilling head / pcs The DOOSAN DNM 400 is a vertical CNC machining center designed for precision milling tasks in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy, and reliability. All technical documents for the machine are available and included. Includes accessories. Control: HEIDENHAIN iTNC 530 Godpfx Ajwmxfljg Reuk Travel paths X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Maximum cutting feed rate: 1~15,000 mm/min Ball screw (diameter × pitch) X-axis: 40 x P12 mm Y-axis: 40 x P12 mm Z-axis: 40 x P10 mm Accuracy Positioning accuracy: ±0.005 mm over the entire travel path Repeat accuracy: ±0.002 mm Clamping table size: 920 x 435 mm Min./max. spindle nose-to-table distance: 150~660 mm Maximum table load capacity: 600 kgf Clamping table surface configuration: 4-125 x 15H8 Maximum workpiece height: 465 mm Machine weight: 5,000 kg

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), - BEKAS - CNC LATHE 4-SUMBU DIAMETER ROTASI MAKSIMUM: 550 mm PANJANG PEMUTARAN MAKSIMUM: 513 mm DIAMETER PEMUTARAN MAKSIMUM: 300 mm Gsdexburuepfx Ag Reuk KAPASITAS BATANG: 65 mm SPINDEL: 4500 rpm; 15-18,5 kW; ASA A2-6 SPINDEL KONTRA: 6000 rpm; 5,5 kW PERJALANAN SUMBU X: 205 mm PERJALANAN SUMBU Z: 580 mm GERAK CEPAT X-Z: 24 - 30 m/menit KEPALA TURRET BERGERAK: 12 POSISI; 5000 rpm; 3,7 kW UNIT KONTROL: FANUC 18i-TB BERAT: 4240 kg DIMENSI KESELURUHAN: 3315 x 1600 x 1750 mm AKSESORIS: PENANGKAP HASIL PRODUK; KONVEYOR SERPIHAN; KONVEYOR PIECE; PENDETEKSI ALAT