Mesin pembengkok tabung mandrel

Dornbiegemaschine 42

Kondisi: bekas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending of sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Rodpfxsdzqbls Ahwjp Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. The folding produces a rounded edge that reduces the risk of injury from cuts on the sharp sheet edges. Ideal for sheet metal processing in furniture manufacturing, cladding panels, or for ventilation and silencer construction.

Kondisi: sangat baik (bekas), Offered is a used solid matter pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Redpfjhwnfcsx Ahwop

Kondisi: bekas, Tahun pembuatan: 2001, Technical Details: Tube diameter: 74 mm Wall thickness: 5 mm Tube diameter min.: 10 mm Tube diameter max.: 74 mm Round material: Steel max.: 40 mm Control: Trumpf Tube Technology IsoBend 2.0 Rsdou Ibvhepfx Ahwjp Maximum bending radius: max: 300 / min: 65 mm Maximum bending angle: max: 195° / min: 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube feed length: 3000 mm Hydraulic working pressure: max. operating pressure: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions approx. LxWxH: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine featuring a bending head and pivoting arm (cold bending machine). Fields of application: exclusively for processing tubes, round bars, and wires made of steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level adjustment: vertical travel = 300 mm (vert. position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached as required. Bending direction is to the right. Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic power unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec. and max. acceleration 1100 mm/sec.) ID. *

Kondisi: siap digunakan (bekas), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm, max. forming length: 3200 mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88 mm/s, bending speed: 1879.6 mm/s, bending angle range: 0°–180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm, weight: approx. 5300 kg. Redpfx Ahetia Hhewjp

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Redpfx Aepugwiohwop Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: bekas, Tahun pembuatan: 2003, gaya penekanan: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year: 2003 Technical Data Manufacturer: HACO Model: ERMS 60-260 Year of manufacture: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): appr. L 7.0 x W 2.0 x H 3.70 m Weight: appr. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain at the front • Centrally adjustable crowning system • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool Redewkttropfx Ahwjp All information without guarantee. A demonstration is possible at any time in the exhibition hall.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, berat keseluruhan: 22.800 kg, gaya penekanan: 250 t, CNC press brake Manufacturer: Weinbrenner Model: GP250 Machine specifications: - Crowning system Rodpfx Ahjr Sxq Rjwjp - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available.

Kondisi: belum diuji (bekas),

Kondisi: bekas, Sheet width: 250 mm Outer coil diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range mm Rsdpfx Aofn Aqmehwop Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. ... m Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightener MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and newly repainted.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, - CNC control Heidenhain TNC 415B Redpfx Aewrzkzehwjp - Programmable 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive power (100% duty cycle): 37 kW Machine weight approx.: 39,300 kg Technical data, accessories, and machine description are not binding.