Gunting guillotine
DURMA

Name: DURMA Gunting guillotine
Brand: DURMA
Availability: InStock

Kondisi

Baru

Lokasi

Werdau

Tampilkan peta

Data mesin

Nama mesin:: Gunting guillotine

Pabrikan:: DURMA

Kondisi:: baru

Harga & Lokasi

Lokasi:: Sorge 54, 08412 Werdau, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A12566447

Pembaruan:: terakhir pada 18.11.2024

Deskripsi

Standard equipment:
- D-Touch 7 touchscreen CNC control unit
- CNC-controlled motorized blade gap adjustment via upper blade (up to VS 4013)
- CNC-controlled motorized blade gap adjustment via lower blade (patented) (from VS 4016)
- Plastic inserts for hold-down devices (gentle on material)
- Variable cutting length adjustment via CNC
- Cutting twist adjustment via CNC
- Table plates with ball rollers
- Backgauge on ball screw spindles 1000 mm
- Foldable finger guard over 1000 mm
- 1 side gauge L=1500 mm, with scale, T-slot & tilting stop
- 2 support arms L=1000 mm, with T-slot & tilting stop (up to VS 3020)
- 3 support arms L=1000 mm, with T-slot & tilting stop (from VS 4006 to VS 4020)
- 5 support arms L=1000 mm, with T-slot & tilting stop (from VS 6006 to VS 6016)
- Cutting line illumination
- Upper and lower blades can be rotated four times (usable on all four sides)

Optional accessories:
- Light curtain for finger protection
- Throat depth 500 mm
- Pneumatic sheet lifting device "Durma I"
Kedpfxjn Ut Sts Aahonf
- Pneumatic sheet lifting device without sheet return "Durma IV"
- Sheet lifting device with conveyor belt and scrap container
- CNC material feed system
- Rear sheet chute
- Rear backgauge 1250 mm
- Hydraulically foldable rear backgauge
- X1, X2 axis control
- Adjustable angle stop 0–180°
- Additional support arm L=2 m with vertical support
- Additional support arm L=3 m with vertical support
- Extension arm L=2 m with vertical support
- Extension arm L=3 m with vertical support
- Side gauge extension L=2 m with vertical support
- Side gauge extension L=3 m with vertical support
- Side gauge right L=1500 mm, with scale, T-slot and vertical support
- Ball in side gauge or in support arms
- CNC front feed system for 3 meters
- Laser cutting line
- Spare blades (standard upper and lower blade)
- Spare blades (upper and lower blade specially for stainless steel)
- Oil cooler
- Hydraulic twist reduction for narrow strips
- Manual central lubrication
- Motorized central lubrication
- Special paint finish
- Control panel on the other side
- Oil heater
- Electrical cabinet air conditioning

Control system:
- DURMA D-Touch 7
- 7 inch color touchscreen
- USB interface
- Ethernet: RJ-45 10/100M
- Integrated database for automatic blade gap and cutting angle adjustment depending on material and sheet thickness
- Program creation
- Cut counter
- User-friendly
- Fast data entry

Are you interested in exactly this machine model or do you have specific questions about it?
Please send us a message using the contact form. We will get back to you immediately!

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2010

38 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 3761 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Nattheim

11.085 km

Gergaji pita
Centauro800 CO

Hubungi

Iklan kecil

Mesin bubut L + Z, mesin bubut, mesin bubut mekanik WEILER LZ PRIMUS GS

Hessisch Lichtenau

11.072 km

Mesin bubut L + Z, mesin bubut, mesin bubut mekanik
WEILERLZ PRIMUS GS

€9.700

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition Knedpfx Aajrtd Uwohof

Lihat detail

Iklan kecil

Saerbeck

11.190 km

SBT 4006
DURMASBT 4006

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: Sheet Length 4,100 mm Sheet Thickness 6 mm Distance Between Uprights - mm Total Power Requirement 15 kW Weight approx. 11,500 kg Dimensions (LxWxH) 5,250 x 2,300 x 2,150 mm Backgauge 1,000 mm D-Touch 7 Touchscreen CNC Control, user-friendly central cutting angle adjustment Ball screw spindle, 1,000 mm & automatic swiveling Support balls in the table for improved material handling Side gauge with scale, T-slot, and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Kodjh Ib T Ujpfx Aahjnf Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be viewed and demonstrated at any time at our demonstration center in Staufenberg, by prior appointment. Additional machines are available for demonstration at our premises in Staufenberg. Further information is available upon request.

Lihat detail

Iklan kecil

San Giovanni Al Natisone

10.893 km

BELT SAW
CentauroCO 800

Hubungi

Iklan kecil

Mesin Punch CNC AMADA PROMECAM Grindermak 150-06

Britania Raya

11.802 km

Mesin Punch CNC
AMADA PROMECAMGrindermak 150-06

Hubungi

Iklan kecil

Steinau an der Straße

11.111 km

Gergaji pita logam
PILOUSARG 235 plus

€3.360

harga tetap ditambah PPN

Hubungi

Kondisi: baru, Tahun pembuatan: 2022, SPECIAL PRICE, in-stock machine, year of manufacture 2022, condition: new List price: €4,200 IN-STOCK MACHINE -- The ARG 235 plus is a manual metal band saw offering high cutting precision. This machine allows for infinitely variable mitre cuts from -45° to +30° (swivel range 45° to the left, 60° to the right). Technical data: ● Cutting capacity: Kodpfxjmftv Rs Aahonf - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right, round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right, round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left, round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Band speed: 40 and 80 m/min ● Saw band: 2710 x 27 x 0.9 mm Standard features: ● Powerful belt drive ● Infinitely variable adjustment of cutting feed rate from the control panel ● Manual workpiece clamping, vice adjustable via dovetail guide ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60° and 90°) ● 250 mm material stop without scale --> Also available in various sizes and configurations!

Lihat detail

Iklan kecil

Mesin deburring lembaran logam ERNST EM 5 N/II/L + 2 B/1400

Metzingen

11.157 km

Mesin deburring lembaran logam
ERNSTEM 5 N/II/L + 2 B/1400

Hubungi

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Knedpfx Aast Hw Iiohjf Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Lihat detail

Iklan kecil

Saerbeck

11.190 km

TEKAN REM
DURMAAD-S 30320

Hubungi

Kondisi: baru, Tahun pembuatan: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y-axis rapid speed: 160 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 140 mm/s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear gauge fingers X-axis travel speed: 250 mm/s R-axis working speed (max.): 140 mm/s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning Ksdpfx Aefifg Hsahjnf R-axis, manual Backgauge with motor as well as linear guide and ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holder system (upper dies) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, according to worldwide standards Electrical equipment according to worldwide standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Lihat detail

Iklan kecil

Mesin pemotong laser TRUMPF TruLaser 3030 (L20)

Lübeck

10.953 km

Mesin pemotong laser
TRUMPFTruLaser 3030 (L20)

Hubungi

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 64.820 h, nomor mesin/kendaraan: A1220A0892, jam kerja laser: 34.068 h, daya laser: 6.000 W, ketebalan lembaran (maks.): 25 mm, ketebalan pelat baja (maks.): 25 mm, tebal plat aluminium (maks.): 15 mm, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 115 mm, berat benda kerja (maks.): 710 kg, berat keseluruhan: 11.500 kg, kebutuhan tinggi: 2.260 mm, persyaratan ruang panjang: 9.600 mm, lebar yang dibutuhkan: 7.760 mm, jangkauan kerja: 3.000 mm, Special features: + 3200 on TruFlow 6000 Laser + RotoLas with automatic chuck + Base jaws, jaw type 7-9 + Prism set, jaw type 8 + Basic carrier with displacement device + Workpiece holder D 15-310 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision processing - Torque drive in combination with linear direct drives - Sealed beam guidance system - Single cutting head strategy - Cooling unit - Automatic longitudinal pallet changer - Wide longitudinal conveyor belt - 17" color touchscreen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine Cutting head: - LensLine - Lens cutting head with 250 mm focal length - Universal quick-change cutting head device (UTI) - ControlLine Control: - Simple / advanced shop floor programming - Fast re-production - Integrated technology data - Automatic shutdown - Production plan - Programmable selection of cutting gas/pressure - SprintLine - ContourLine - Microweld - FasLine - AdjustLine - Teleservice - Diagnostic functions - Online help - FlyLine Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Light barriers - Laser monitoring system - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels Knsdpfx Ajvn Stmjahjf Extended machine features: + Thin sheet productivity package - High-speed cutting - Lens cutting head with 130 mm focal length - Compressed air cutting + Crosswise pallet changer incl. safety device + MDE interface + LoadMaster incl. loading station and spreading magnets

Lihat detail

Iklan kecil