Centrifugal fan, radial fan, fan, ventilator, control cabinet fan; control cabinet ventilator

ebm-papst K3G450-AZ30-61

Radial fan, fan, blower, control cabinet fan
Control cabinet fan, radial module with support spider
EBM PAPST Type K3G450-AZ30-61
Year of manufacture: 2015
Motor: M3G150-IF
Design: Radial
Air flow rate: max. 8040 m³/h
Pressure increase: 1492 Pa
Fan: Ø 450 mm
Number of blades: 7
Power connection: 3~ 380-480 VAC 50 / 60 Hz
Nominal speed: 2750 rpm
Power: 5370 Watts at 400 VAC
Rated current: 8.3 A at 400 VAC
Efficiency: 64.9 %
Efficiency grade N: 67.7
External mounting frame: 550 x 550 mm
Operating mode: Continuous operation (S1)
Bearings: Maintenance-free ball bearings
Protection class: IP55
Insulation class: F
Compliance with standards: EN 61800-5-1; CE
Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC
Dsdpj Agw Enofx Aavocp
Technical features:
- Output 10 VDC, max. 10 mA
- Output 20 VDC, max. 50 mA
- Output for slave 0-10 V
- Input for sensor 0-10 V or 4-20 mA
- External 24 V input (parameterization)
- External enable input
- Fault alarm relay
- Integrated PID controller
- Motor current limitation
- PFC, passive
- RS485 MODBUS-RTU
- Soft start
- EEPROM write cycles max. 100,000
- Control input 0-10 VDC / PWM
- Control interface with safety-isolated SELV potential
- Over-temperature protection, electronics / motor
- Under-voltage / phase failure detection
Dimensions W x H x D: 550 x 550 x 480 mm
Weight: 54 kg
Very good condition - from a test setup

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.