Mesin bending putar

EHT MULTISWING 4 - 32

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (L/W/H): 3200x2300x1350 mm Weight: 3,780 kg Standard equipment: - EZM9910 control unit - Backgauge range of 750 mm, programmable via control unit - Plastic inserts for hold-downs - 1 side stop and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Ball screw spindle - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Further machines are available for demonstration at our facility in Staufenberg. Nwodpfx Abed R Er Djvod Further information available on request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 48.274 h, jumlah sumbu: 6, gaya penekanan: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, an electrohydraulic top drive, and a 2D graphical control DA 69 on a 10.4" color screen. The machine is equipped with a 6-axis CNC backgauge, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced under a TRUMPF maintenance contract. Please contact us for more information about this machine. • Clear column spacing: 3680 mm • Installation height: 535 mm • Control unit: 2D graphical control DA 69 on window with 10.4" color display • Electrical equipment: for 3-phase 400V / 50Hz • The machine has been serviced annually • Maintenance contract available • Rigid machine frame, fully welded steel construction • Press beam with high flexural strength • High-dynamic electromechanical direct drive (torque motor) • Electrohydraulic top drive via proportional valves • Modern block hydraulic system • Inductive length measurement system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers Nwedpfox D D Hyox Abvjd • Upper Modufix tool clamping system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numeric workshop programming • Integrated Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-capable, teleservice via modem • Electrical cabinet air conditioning • Side-mounted safety doors and rear safety guard • Two-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomic package: comfortable front work area and footrest • 2 storage consoles and 2 document trays • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tooling maintained, all within tolerance Additional Equipment: • Backgauge system with 5 axes and electrical cabinet air conditioning • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support arms • 1x bending aid with 900 mm parking position • Table extension for base table / auxiliary table Technical Specification: Bending length: 1020 mm

Kondisi: baru, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 29689491504001, Only 2 units left for sale! Includes ignition system, complete set The system consists of a powerful wood gas engine coupled with a generator for efficient power generation. It is designed for stationary use and is ideal for industrial applications, combined heat and power plants (CHP), or emergency power supply. MAN Inline 6-cylinder engine with generator: - Robust construction for continuous operation - Optimised combustion for natural gas or biogas Direct-coupled to the engine - High efficiencies for maximum energy yield - Designed for three-phase power generation Electronic ignition for precise control - High reliability even under demanding conditions Nwodpfx Ajxxk Tpobvjd Output: as per type certificate Voltage: 400 V, 50 Hz Control: Integrated engine and generator management High efficiency and long service life Service-friendly design Adaptable for different types of gas Condition: The item was briefly installed but never put into operation. Therefore, it is as new and fully functional.

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: UP 20_LIND, Used Motoman HP20 Type: HP 20 Controller: NX100 Year of manufacture: 2004.09 Nsdpfxofd Drre Abvowd Payload capacity: 20 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 190454, Penawaran 25290 Data teknis: - Lebar kerja maks.: 3040 mm - Ketebalan material maks. pada kekuatan 40 kg/mm²: 2 mm - Sudut tekuk dapat dipilih sebelumnya: 6° - 135° - Lebar bukaan maksimum / stroke pelat penjepit atas: 250 mm - Penyesuaian tinggi: Nwodsw Sthdspfx Abvjd - pelat tekuk: 50 mm - pelat penjepit bawah: 50 mm - Penggerak pelat penjepit atas: 400 V / 0,37 kW - Penggerak pelat tekuk: 400 V / 0,75 kW - Penahan belakang manual - Rel tekuk jenis kaki angsa tersegmentasi - Kebutuhan ruang sekitar: P 4000 x T 1400 x L 1200 mm - Berat sekitar: 3500 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2003, FLEXIbend RAS 73.30 - Data teknis umum dalam mm: Panjang tekuk: 3200 mm Ketebalan plat maksimum (400 N/mm²): 3,0 mm Jarak angkat rahang atas maks: 300 mm Sistem stopper (U stop): 10-1550 mm Opsi perpanjangan: (-3050) Dimensi mesin (opsi terbesar): 4360 x 5220 mm Berat mesin dasar: 4400 kg - Data terkait mesin: Penggerak motor; 400V, 50/60 Hz, 3-fase Tahun pembuatan: 2003 Kondisi: Diperbaiki – kondisi bekas sangat baik Satu set alat lengkap, dengan ketebalan plat maksimum spesifik Pengoperasian oleh 2 orang dari depan Nsdpfsx Hx Slex Abvewd Foot switch kedua untuk pengoperasian dari belakang (termasuk pengaman cahaya saat bekerja dari belakang) Kontrol layar CNC grafis warna 15" Touch&More CNC backgauge dan sistem penyangga (10-1550) Sistem stopper (standar): 10-1550 mm - Gambar ilustrasi -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, The press brake was manufactured in 1994. The working length is 1,250 mm with a pressing force of 600 kN. Manufacturer: Micoda Nwodpfx Abop R Ircjved Working length: 1,250 mm Pressing force: 600 kN Weight: 4,000 kg Power: 10 kW

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, For sale is a used, fully functional semi-automatic mitre band saw machine. Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Max. vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Nedpfjwigavex Abvjwd Main drive power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Kondisi: bekas, Tahun pembuatan: 1996, Maximum punching force: 55 t Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm Angle steel 90°: 120x120x10 mm Angle steel 45°: 70x70x7 mm Nsdpfxowgkq Tj Abvewd Round bar: 40 mm Square bar: 40 mm Strokes per minute with 20 mm stroke: 37 /min Throat depth: 250 mm Machine weight approx.: 1,800 kg

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. Nwsdpfx Ajd Ixadsbvjd The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000