Motor roda gigi 0,25 kW 670 rpm

ELKA M80B8

Kondisi: bekas, DATA TEKNIS - Jumlah poros: 4 - Jumlah spindel: 1 - Jumlah kepala revolver: 1 SPINDEL UTAMA - Hidung spindel: A2-8 - Daya penggerak spindel: 18,5 [kW] - Kecepatan spindel: 4.000 [RPM] - Diameter batang maksimum: 80 [mm] - Panjang pemesinan maksimum: 728 [mm] - Diameter pemesinan maksimum: 460 [mm] - Resolusi minimum sumbu C: 0,001 [derajat] KEPALA REVOLVER - Jumlah posisi: 12 - Jumlah posisi yang digerakkan oleh motor: 12 - Jarak perjalanan X/Z: 260/795 [mm] - Jarak perjalanan Y: +/- 50 [mm] - Jenis alat: BMT - Kecepatan alat yang digerakkan: 6000 [RPM] PENAHAN - Jenis penahan: Digital - Jenis kerucut: CM5 - Jarak perjalanan penahan: 650 [mm] PASOKAN LISTRIK - Tegangan suplai: 400 [V] - Total daya: 39 [kVA] BERAT DAN DIMENSI - Ruang yang dibutuhkan: 3.110 x 1.922 [mm] - Tinggi mesin: 2.120 [mm] - Berat mesin: 6.100 [kg] JAM MESIN - Jam saat mesin menyala: 26654 [jam] - Jam operasi: 15488 [jam] AKSESORIS - Pengontrol: CELOS Ppodpox Tvklefx Adisw - Pemrograman Teach-In: MAPPS 4 - Antarmuka: USB, PCMCIA, RJ45, RS232 - Perangkat pengukur alat: Renishaw - Tangki pendingin * dengan pompa bertekanan tinggi: 15 [bar] - Konveyor serpihan - Perangkat pengukur alat - Pengeluaran komponen - Konveyor komponen - Majalah batang: LNS QUICK LOAD SERVO 80 S2 - Jumlah dudukan alat tetap: 9 - Jumlah dudukan alat yang digerakkan: 3 - Transformator listrik - Cekam

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Ppjdpfxjgwbbqj Adiew No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Cloos welding robot Qirox QRC 320 incl. V6 control unit, Pedeizwv Nepfx Adiopw base pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary-tilt table WPK 5000, load capacity 500 kg, 1 job selection panel, 1 control unit for customer-supplied sliding door gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. A second station with an additional, identical rotary-tilt table is possible.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Table clamping surface: 765 x 400 mm Travels (X/Y/Z): 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool stations: 20 positions Feed rates: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Ppodpfx Adetwy Disijw Space requirement: 2300 x 2100 x 2650 mm Weight: 4000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 5.217 h, panjang pembubutan: 285 mm, lubang spindel: 91 mm, jarak pergerakan sumbu X: 1.000 mm, jarak gerak sumbu Z: 285 mm, daya motor spindle: 26.000 W, tinggi total: 2.200 mm, panjang total: 3.200 mm, lebar total: 2.300 mm, berat keseluruhan: 6.600 kg, 9480 Podpfxoyyxlfe Adiopw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 590 mm, jumlah sumbu: 6, Mesin MORI SEIKI NL2000SY/500 dengan 6 sumbu ini diproduksi pada tahun 2005 dan memiliki jarak gerakan sumbu X sebesar 260 mm, jarak gerakan sumbu Z sebesar 590 mm, daya spindel sebesar 5,5 kW, dan kecepatan spindel sebesar 6.000 RPM. Mesin ini dilengkapi dengan turret perkakas dengan 12 posisi. Jika Anda mencari mesin bubut berkualitas tinggi, Anda dapat mempertimbangkan mesin MORI SEIKI NL2000SY/500 yang kami tawarkan untuk dijual. Psdex D R Auepfx Adiepw • Turret perkakas: 12 posisi

Kondisi: bekas, Tahun pembuatan: 1961, de2c1c73 Ppjdpfxewwl I Is Adiew

Kondisi: baik (bekas), Tahun pembuatan: 1990, Bearbeitungszentrum mit 4 Achsen Tischmaße: 1200 x 660 mm Verfahrwege: X 1050 mm, Y 650 mm, Z 660 mm Maximale Tischbelastung: 1.600 kg Vorschubgeschwindigkeit: 15.000 mm/min Werkzeugmagazin mit 31 Plätzen, teilweise mit BT 50 Werkzeugaufnahmen bestückt 4. Achse (gesteuert): NIKKEN CNC 250, Spannfutter-Durchmesser 250 mm Abmessungen (LxBxH) ca. 3.000 x 5.000 x 2.900 mm Ppsdpfx Adjfbml Nsijw Gewicht ca. 13.000 kg

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) Pedod Nt Rqjpfx Adiepw EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: bekas, Tahun pembuatan: 2008, diameter pembubutan: 275 mm, lubang spindel: 80 mm, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 1.345 mm, tinggi total: 2.232 mm, panjang total: 4.339 mm, lebar total: 2.232 mm, berat keseluruhan: 7.600 kg, Perlengkapan: dokumentasi / manual, Mori Seiki NL 2500 SY / 1250 CNC Turning Machine with Y-Axis, Driven Tools, and Sub-Spindle CNC Control MSX-850-III (Mitsubishi 720 BM) Turning Diameter: 275 / 366 mm Spindle Bore Diameter: 80 mm Spindle Speed: 4,000 rpm Spindle Motor: 18.5 / 15 kW X-Axis Travel: 260 mm Y-Axis Travel: +50 / -50 mm Ppodpfxey Nyzgs Adijw Z-Axis Travel: 1,345 mm W-Axis Travel (Sub-Spindle to Main Spindle): 1,275 mm Minimum Indexing C-Axis Main Spindle: 0.001° Number of Tool Stations on Turret: 12x Number of Driven Tools: 12x Tool Interface: BMT Bar Feeder: LNS Quick Load Servo III Motorized Driven Tools Speed: 6,000 rpm If you have any questions regarding the machine or would like to arrange a viewing appointment, please feel free to contact us by phone or email. Please also have a look at our other listings to get a complete overview of our stock.