Aufspannwinkel verstellbar

Elliott 640/400/H360 mm

Kondisi: baik (bekas), Tahun pembuatan: 2014, Hurco VMX 84 T, Year of manufacture: 2014, Control: WinMax, Travel X/Y/Z: 2135/860/760 mm, Tool changer with 40 stations, Tool holder: SK 40, Spindle speed up to 18,000 rpm, Itjdpfx Aaov S Twuehor High-pressure internal coolant, Simulation graphics, Electronic handwheel, Pocket milling with islands, DXF software, 3D infrared measuring probe,

Kondisi: baik (bekas), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional. The machine can be inspected and tested under power on site. International shipping available. Itsdoum Rpyspfx Aahsr Inspection: Please note that, to avoid misunderstandings, the machine can be inspected and tested under power prior to purchase. Should you have any questions, please ask them before buying to avoid any uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse Itodpfx Aou U Sabeahsr • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Tahun pembuatan: 1993, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used REIFENHÄUSER single-screw extruder - Screw size: Diameter 50 mm x 30 L/D - Grooved feed and degassing zone - Type: RH 241-1-50-30v - With DC drive 30.2 kW - Year of manufacture: 1993 - Equipped with installed control cabinet Itedopy Eygopfx Aahsr - Fully functional

Kondisi: bekas, edge sanding machine, edge sander, sanding machine Itedpfx Aocmh H Ioaher - Sanding height: 75 mm - Distance between return pulleys: 700 mm - Sanding shoe length: 390 mm - Dimensions: 780/300/H520 mm - Weight: 40 kg

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.135 mm, jarak lintasan sumbu Y: 865 mm, jarak gerak sumbu Z: 762 mm, produsen pengendali: Hurco, model controller: Winmax, lebar meja: 865 mm, panjang meja: 2.185 mm, berat keseluruhan: 17.500 kg, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 40 batang, Vertikal machining centre HURCO VMX 84 T40 Year of manufacture: 2010 Control: WinMax (Version 08.01.09.23 ST) Technical specifications: Drive power: 18 kW Spindle speed: 10 – 12,000 rpm Tool holder: SK 40 Number of tool magazine pockets: 40 Internal coolant supply (IKZ): 20 bar Travel distances: X-axis: 2,135 mm Y-axis: 865 mm Z-axis: 762 mm Equipment: - Chip conveyor - External coolant unit with 600-litre tank capacity Isdpfx Aajv Sm Hvehetr - Spindle chiller

Kondisi: sangat baik (bekas), Granulasi eksentrik EGR digunakan dalam produksi plastik yang peka terhadap suhu dan geseran. EGR dirancang khusus untuk penggranulan PVC lunak, PVC keras, formulasi HFFR, atau senyawa untuk kabel tegangan rendah, menengah, dan tinggi berbasis elastomer. Itsdpfjw Iu T Tsx Aahsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, panjang meja: 790 mm, lebar meja: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm Isdpfx Aaewffymohjtr

Kondisi: baik (bekas), Tahun pembuatan: 1971, nomor mesin/kendaraan: 170119003210A0, 25217 Technical Specifications: - Keyway width: 3 to 36 mm - Max. keyway length: up to 340 mm Itsdpewu Suvefx Aahjr - Bore diameter: 10 to 350 mm - Feed rate: 0.01 – 0.22 mm - Cutting speed: 2 – 10 m/min - Return speed: 20 m/min - Max. tensile force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A complete CNC dual-gantry plasma cutting system by Microstep, equipped with oxy-fuel torch for nesting, bevel cutting, and pipe processing, is available. 1) Plasma cutting machine: Max. working length: 16,500 mm, max. working width: 2,500 mm, max. working width including nesting: 3,700 mm, max. material thickness for stainless steel/structural steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: with a plasma rotator and Kjellberg HiFocus 280i neo plasma source. Gantry 2: fully automatic acetylene oxy-fuel torch, with option to equip a second torch carriage. Pipe cutting device: pipe diameter range: 30 mm - 700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. 2) Donaldson Cyclopeel DFPRO 16 extraction and filtration unit, air flow rate: 16,000 m³/h, filter elements: 16. Documentation available. On-site inspection possible. Expected to be available from late 2025/early 2026. Photos are from commissioning in 2014. Itsdpswmqwyofx Aahsr