Single kepala mesin cutting-off

Elumatec MGS

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Cedpfx Adjuiy Ngsgjpt Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Kondisi: baru, Tahun pembuatan: 2025, Valmec Master 400 Aging Brush Machine - Working width: 400 mm - Maximum working height: 300 mm - Motors: 2 x 3 kW - Conveyor belt with inverter speed control Cpsdpogmm Sasfx Adget - Supplied with steel brush and Tynex brush - Extraction outlets: 2 x 100 mm - Independent height adjustment of brush units - Dimensions: 1300 x 900 x 1600(h) mm - Machine weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2007, Technical data: Speed: 2800 rpm Saw blade: ø 380 mm Motor output: 3000 W Codpfx Asrwlwvedgopt Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 26045, diameter mata gergaji: 420 mm, Performs double-angle cuts. Supplied complete with infeed roller conveyor and outfeed roller conveyor equipped with a measuring reader. Codpov Hfc Esfx Adgopt

Kondisi: baru, Saw blade diameter 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Cpodefg Rldjpfx Adget Working height: 925 mm Blade speed: 15 – 150 rpm Total power requirement: 5.5 kW Machine weight approx. 0.615 t Space requirement approx. 1.4 x 1.4 x 2.0 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on ball recirculation linear double guides - Three-stage gearbox - Infinitely variable speeds, 15–150 rpm - Vice opening 190 mm - Stroke of the saw head programmable directly from the control panel, adjustable to match the cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade, Ø 370x32x3 mm for solid and profile material - Vice with counter-hold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical length cuts - Material support arm, also with connection option for roller conveyor/loading side

Kondisi: baru, Tahun pembuatan: 2025, ATTENTION: POSSIBILITY OF CALCULATING ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers: gantry cranes, semi-gantry cranes, jib cranes, column cranes, suspended bridge cranes, and overhead travelling cranes. We invite you to submit your inquiries. Quotations are tailored based on data provided by the customer, such as: crane type, load capacity, lifting height, dimensions, and runway length. This listing concerns a gantry crane/hoist with a load capacity of 5 TONS. All crane components are manufactured from top-quality materials, ensuring durability and resistance to damage even in demanding environments. TECHNICAL PARAMETERS: GANTRY CRANE HOIST LOAD CAPACITY 5 TONS Span length - 6 M Lifting height: 3.55 M Lifting mechanism - 5-ton electric chain hoist Lifting speed: 2.7 M/MIN Cross-travel speed: 11 M/MIN Crane travel speed: 10 M/MIN DUTY CLASS A3 Power supply: 380V/50Hz/3 PHASE Control mode: pendant "lamp" + remote control A VAT invoice is issued for all machines. Codpfxsv Ni Rxe Adgjpt For any questions, please do not hesitate to contact us.

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Cpodpoh Rdwxofx Adgjt Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories - Quality Made in Germany The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, BRIQUETTING PRESS machine, AUTOMATIC, HYDRAULIC model POR STANDARD used machine working condition: Excellent Briquette cutting system hydraulic machine CE marking: Yes hourly output: 60 / 90 kg/h hydraulic pump motor: 7.5 HP briquette diameter: 65 mm Cjdpow E Iyiefx Adgopt max. briquette length: 50 / 300 mm voltage: 380V / 50Hz net weight: 800 kg overall dimensions: 195 x 110 cm, H = 150 cm

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 21100122-F, 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting capacity at 90° (round): 120 mm - or (flat): 105 x 105 mm - or (flat): 180 x 70 mm - Cutting capacity at 45° (round): 110 mm Cpsdpfxjwq N Swj Adget - or (flat): 135 x 60 mm - Mitre adjustment left and right: 45° - Tiltable mitre adjustment of the saw head to the left for bevel cuts - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1,730 x D 1,200 mm - Weight approx.: 180 kg

Kondisi: bekas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx: 2500 kg Weinig Profimat 23 four-sided planer, window version with glass bead cutting, or can be used as a grooving spindle ATS control and program control --- Machine is currently being overhauled and function-tested Technical data summary (For any additionally included accessories, please enquire) --- General --- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW Cpsdpfx Aju Su Huedgst > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx: 2500 kg Spindle configuration --- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically controlled up/down Spindle specifications --- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features --- > Glass bead separation or can be used as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package - Shared control of the right spindle and glass bead removal via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planing heads (Technical data according to manufacturer - no liability assumed!)