Mesin penggiling silinder - universal

EMAG Weiss WUG 21 (W27) / 650 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Alpha 1550XS – cycle lathe incl. accessories Centre distance is 1500 mm, not 2000 mm Multifix tool holders - 16 pieces Year of manufacture: 2013 Top condition (truly in excellent condition) Various change jaws (soft jaws) Steady rest Faceplate Spindle bore 104 mm Swing over bed 550 mm Three-jaw chuck 315 mm Blsdpounruyefx Aa Tod

Kondisi: bekas, translation-001 Bodpev Armcofx Aa Told

Tahun pembuatan: 2003, Kondisi: baik (bekas), Travel: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Bljdpfoiwkhksx Aa Tod

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. Bjdpfx Aefxyhfoa Told In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Bljdpfxov I Eq Se Aa Tjd Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors Bedjvzhf Sspfx Aa Teld - Clamping devices - Documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 750 mm, jumlah slot dalam magazin alat: 36, panjang meja: 2.200 mm, lebar meja: 850 mm, model controller: OKUMA-OSP-HMI, pasokan pendingin: 15 batang, jarak dari tengah meja ke hidung spindel: 950 mm, daya motor spindle: 22 W, jumlah spindel: 36, pergerakan cepat sumbu Z: 16 m/menit, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 16 m/menit, hidung spindel: BT 50, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 50 rpm, beban meja: 2.500 kg, diameter alat: 120 mm, panjang alat: 400 mm, berat alat: 20 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, 3-axis vertical machining centre with OKUMA-OSP-HMI CNC Bledou Dinkjpfx Aa Tod

Kondisi: bekas, Tahun pembuatan: 2014, Workpiece length 100 mm Swing diameter 80 mm Number of spindles 2 Control FANUC 31i-B5 Workpiece weight 2.00 kg Center height 170 mm Grinding wheel diameter 100 mm Grinding wheel bore 32 mm Max. grinding wheel width 20 mm Max. circumferential speed 125 m/sec Steady rest passage 45 - 60 mm Total power requirement 75.00 kW Machine weight approx. 25.00 t Space requirements approx. 5.00 x 3.50 x H3.50 m Camshaft grinding machine for cam blanks. Bodsvx Uvfopfx Aa Teld Equipped with FANUC 31i-B5 control for non-circular grinding; loading gantry; CO2 extinguishing system; for CBN grinding wheel; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock variant 12 (two grinding spindles movable independently)

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Bsdpfx Aju A Dn Nsa Told

Kondisi: baik (bekas), Tahun pembuatan: 2000, Mesin bubut berat ERNAULT SOMUA P72 dengan 3 rel pemandu Bjdoxq D Tyopfx Aa Told diameter di atas ranjang 2200mm diameter di atas dudukan 2000mm kecepatan 1,5 hingga 3000rpm - 75 hp berat mesin 39t berat yang diizinkan 16t mesin dapat dilihat beroperasi