Ganda gergaji potong sudut / double miter saw

emmegi Classic Magic

Emmegi Classic Magic 500 5 Meter

Electronic double mitre saw with automatic feed of the movable cutting head, powered by a brushless motor and governed by a numerical control system. Pneumatic control of the angle adjustment in three fixed positions: 90°, 45°, and 22°30’ (external) or with a mechanical system for manual adjustment of intermediate angles. Hydro-pneumatic feed of the saw blades. Swivelling heads: The rotation of the heads around the horizontal axis is achieved by pneumatic cylinders, and the selectable angles range from 90° to 22°30' external; intermediate angles are set using special manually adjustable stops. The movable units are equipped with integrated pneumatic flip-down safety devices for the working area.

Pneumatic Intermediate Support
The pneumatic intermediate support is extremely useful when cutting light profiles of considerable length. In this case, the pneumatic support automatically provides the ideal support for the profile.

Additional Clamp for Profile Support on Roller Conveyors
After each cut, the remaining short profile section tends to fall onto the roller conveyor, risking contact with the saw blade while the cutting phase is still ongoing. This movement can damage both the workpiece and the freshly cut piece. The additional vise installed on the roller conveyor prevents this by holding the profile firmly throughout the entire cutting process.

Year of manufacture: 2019. As new! The saw has barely been used and is still covered with protective film on the printer and carriage!
Unfortunately, the saw does not have a cut counter, so it is not possible to say exactly how many cuts it has made. However, upon inspection it is immediately clear that the saw is truly in like-new condition and has barely been operated. It was used by its previous owner only for training purposes!

Features:
- LCD display with backlighting
- Prepared for connection of an industrial label printer
- USB port
- Single cut execution
- Memory for 99 profile correction values and automatic calculation of section length for mitre cuts
- Storage for 20 cutting lists entered via keyboard (50 sets each)
- Storage for 10 cutting lists imported via RS232 serial interface from an external PC (100 sets each)

MACHINE SPECIFICATIONS
- Position detection of the movable unit via direct measuring system with magnetic tape
- 2 carbide-tipped saw blades, diameter 500mm
- Pneumatic full-protection covers over the cutting area
- 2 pneumatic horizontal clamping units with low-pressure safety system
- Profile support roller conveyor
- Lubrication system: mist spray or minimal quantity pulse spray system
- Mitre cuts with saw blades Ø 500 mm from 22°30’ (external) to 90°
- Manual profile support
- Prepared for automatic start of the MG4 chip extraction system
- Two standard profile inlays
- Metric scale
- Label printer incl. peel-off function
- Overlength cutting
- Shortcut
Bedow Svxljpfx Ahwocw
- Cross cutting
- Macro
- Automatic cutting
- Pro software package

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.