Pabrik penyaringan

Enders stationäre Siebanlage

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Processing plant for (track) ballast 40 cbm feed bunker with push cart Impact crusher OMT 120 kW with feed and discharge chute Double-deck screening unit 1,400 x 4,000 mm Rjdpfx Aotpamgsmuju with conveyor and stockpile belts complete electrical installation

Kondisi: sangat baik (bekas), The plant essentially consists of: - 2 feed units (walking floor bunkers) - 2 silos, each with 55 cbm capacity, equipped with discharge screws - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-connected twin-shaft extruders for the disintegration of woody biomass Rjdpfx Aslxzl Eemuju - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GG520A-17518 & GG502S-16471, lebar total: 5.100 mm, panjang total: 5.350 mm, tinggi total: 1.500 mm, berat keseluruhan: 3.250 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tekanan: 8 batang, panjang pemotongan (maks.): 3.700 mm, Pengukuran maksimum: 3210 mm Pengukuran minimum: 150 mm Panjang potong maksimum: 3700 mm Rjdsycgiiopfx Amuou Panjang potong minimum: 250 mm Monolitik: 3 - 10 mm Laminasi: 2+0,38+2 (22-1) minimum 8+4,56+8 (88-12) maksimum Bobot maksimum kaca pada lengan saat pemuatan/pembongkaran: 450 kg

Kondisi: baru, Tahun pembuatan: 2024, New Aurepa ADR tank trailer, gas, oxygen, nitrogen, argon, CRYOBASE Rjdpfxst R R Uqj Amusu Trailer for liquid nitrogen, liquid oxygen, liquid argon, gas, cryogenics New trailer: Year of manufacture: 2024, Germany All documentation available Used tank: Working pressure: 3.85 bar Capacity: 2,000 L We also have other tankers for LIN, LOX, LAR, LNG and CO₂, argon, oxygen, nitrogen and carbon dioxide, hydrogen, methane We are happy to prepare an offer for you or provide further information.

Tahun pembuatan: 2016, Kondisi: bekas, Cortadora y dobladora MEP, SYNTAX 28 Redjxl Avvepfx Amusu

Kondisi: bekas, jarak tempuh: 835.837 km, daya: 309 kW (420,12 hp), pendaftaran pertama: 11/2010, jenis bahan bakar: diesel, berat kosong: 9.580 kg, berat muatan maksimum: 16.420 kg, berat keseluruhan: 26.000 kg, ukuran ban: 315/80R22.5, konfigurasi gandar: 6x2, jarak roda: 4.800 mm, bahan bakar: diesel, rem: intarder, warna: kuning, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 2, panjang total: 9.480 mm, Tahun pembuatan: 2010, tinggi konstruksi: 3.850 mm, jumlah tempat tidur: 1, Perlengkapan: ABS, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, pendingin udara,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Rodsvf E Avjpfx Amuou Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Operating hours: 270 h Electric: yes Rsdpfsq N E U Asx Amuou

Tahun pembuatan: 1963, Kondisi: siap digunakan (bekas), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Rsdpfx Aeh I Edvomusu

Kondisi: sangat baik (bekas), jarak tempuh: 525.000 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 09/2014, jenis bahan bakar: diesel, ukuran ban: 385 65 R 22.5, konfigurasi gandar: 6x2, bahan bakar: diesel, kapasitas tangki bahan bakar: 580 l, rem: pengereman mesin, warna: kuning, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 7.090 mm, lebar total: 2.550 mm, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 13.000 kg, beban gandar yang diizinkan (gandar 3): 13.000 kg, Tahun pembuatan: 2014, Perlengkapan: ABS, kendali jelajah, pendingin udara, tangki bahan bakar kedua,