Forklift listrik 3t Lithium Ion

EP CPD30L1-S

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1321500165, Tahun pembuatan: 2023, jam operasional: 10 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.800 mm, pengangkatan bebas: 1.520 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.225 mm, daya: 24 kW (32,63 hp), tipe perpindahan gigi: otomatis, kapasitas baterai: 560 Ah, tegangan baterai: 80 V, Tersertifikasi DGUV hingga: 08/2025, lebar kerangka garpu: 1.228 mm, panjang garpu: 1.070 mm, berat keseluruhan: 4.830 kg, tinggi total: 4.095 mm, panjang total: 3.640 mm, lebar total: 1.298 mm, warna: original, Perlengkapan: geser samping, kabin, pencahayaan, 7885b635-6772-49e1-9c73-a0ebbaa4fcdd Redevmyz Nepfx Aahjck

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Rjdpfx Aovgnb Rsahsck Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Kondisi: bekas, weinig_powermat_700_2026 Rsdpfx Ajxpuufjaheck

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: P 04-09-002, neu U05 10 001, Automatic Spray Machine Venjakob HGS-K All images are sample images only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price refers to refurbished condition - Operator side: right - Dual-drive system for gun carriage - Dry extraction: 4,000 m³/h - Extraction port diameter: 400 mm Rcedpfxoumvr Te Aahek - Conveyor belt transport system - Feed speed continuously adjustable from 3 to 8 m/min - With paint recovery system - Gun control: LS 1 - Installed paint circuits: 1 pc - Airless spray system: 4 units Krautzberger KAA 1300 - Number of paint pumps: 1 pc - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, fuse protection: 35 A - Location: in stock - Voltage fluctuation tolerance max. +/- 5% _____ Optionally, we can also provide you with a quote for the assembly and commissioning of the system, as well as training for your staff. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Tahun pembuatan: 2025, Kondisi: baru, Rollers: 4 Rcodeg Ez Siopfx Aahjk Roller width: 60 mm Roller diameter: 120 mm Spring deflection: 20 mm Speeds: variable, 3 – 18 m/min Stand: Stativ 1050 plus Motor power: 0.75 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Veneer splicing machine Electric motor, separate for chain drive and glue application Glue is applied at the edge of the newly inserted veneer strip, increasing the bond strength of the glue joint. Robust, durable stainless steel conveyor chain with weighing links Separate adjustment of temperature, speed, and pressure Rcodpfx Aajxgg Hhshjk Quick and easily accessible glue trough for fast and easy refilling or cleaning Multiple heating zones for individual temperature control Extended glue trough life thanks to integrated cooling unit Continuously variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 1200 mm Veneer strip width: 45–1200 mm Veneer strip length: 300–3200 mm Veneer strip thickness: 0.4–3.0 mm Veneer moisture content: max. 8–12% Working height: 900 mm Feed speed: 5–50 m/min Heating zone length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg SPARE PARTS WORTH EUR 3,500 INSTALLED

Kondisi: bekas, Mesin serut dan profil otomatis Weinig Profimat 23 untuk penyerutan dan pemprofilan kayu empat sisi dengan alat dan tambahan gergaji leist kaca untuk produksi jendela. Spindel: 5 Spindel 1: Bawah Spindel 2: Kanan Spindel 3: Kiri Spindel 4: Atas Spindel 5: Bawah Spindel 6: Gergaji leist kaca Lebar kerja: 230 mm Rcedpfx Aexc Hhweahek Tinggi kerja: 120 mm Daya total: 28 kW Arus nominal: 60 A

Kondisi: bekas, Number of spindles: 5 units Working width: 20 - 230 mm Planing height: 8 - 120 mm Joiner table length: 2000 mm Feed motor: 1.1 kW Continuously variable feed speed: 2 - 12 m/min 1 WEINIG Planing & Moulding Machine VARIOMAT incl. multifunction/slotting table ----- Machine will be cleaned and function-tested before delivery Technical manufacturer description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, horizontal bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed 6000 rpm Tool circle diameter: 125 - 145 mm Axial adjustment range: 5 mm Rabbet unit incl. rabbeting cutter MarathonCoating for table insert before and after 1st lower spindle 2nd spindle, vertical right ----- Motor with brake: 11 kW Shared motor with left vertical spindle Diameter 40 mm Speed electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool circle diameter for longitudinal machining: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum profiling depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip 125 mm Insert segment incl. additional fence lip 150 mm 3rd spindle, vertical left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool interface Shared speed with right vertical spindle Tool circle diameter for longitudinal machining: 93-232 mm Maximum profiling depth: 45 mm Minimum profiling depth at tool diameter 200 mm: 20 mm Axial adjustment range below table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle, horizontal top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed 6000 rpm Tool circle diameter: 125-200 mm Maximum profiling depth: 30 mm Minimum profiling depth at tool diameter 200 mm: 20 mm Axial adjustment range: 30 mm Rsdpswugpbjfx Aahjck Glazing bead discharge after upper spindle 5th spindle, second horizontal bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed 6000 rpm Tool circle diameter: 125-200 mm Maximum profiling depth: 15 mm Axial adjustment range: 10 mm Machine operation ----- Both axes of all spindles—with the exception of the 1st lower spindle—are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital readout of the feed in conjunction with the pressure roller before the upper spindle. Pressure after the upper spindle adjustable separately. Memory function ----- To store set values of profiles Tool adjustment axes and pressure elements before and after the upper tool holder with electronic double displays: Function: - Store the setting values of the machined profile at the press of a button under a profile number - Upon recalling the profile number, the electronic double displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are matched - 99 memory slots 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with memory function. For spindles no. 2, 3, 4 3 radial CNC-controlled adjustments and posit...

Kondisi: baik (bekas), Tahun pembuatan: 2012, jenis bahan bakar: listrik, Immediate operational condition, duplex mast, without side shifter but hydraulic circuit present, 13,795 hours (subject to change due to use). Battery from 2014 was reconditioned by a specialist in 2023, with several cells replaced. 80 V, lift height 3,300 mm, fork length 1,600 mm. Forward-reverse control via foot pedal, similar to Linde. Rcedeiqpp Sjpfx Aahok

Kondisi: bekas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 x right), reinforced motors, 8,000 rpm, ATS control system The machine will be cleaned and function-tested before delivery. Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 5.5 kW (motor renewed) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125–180 mm Rabbetting device incl. tool Hardened table insert in front of the first bottom spindle 2nd spindle right 12.1 kW (motor renewed) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the left spindle, incl. lateral spring-loaded roller pressure 4th spindle right 8.3 kW (motor renewed) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Divided pressure shoe in front of top spindle, adjustable to the tool circle and can be swung away from the tool, spring-loaded. 6th spindle bottom 4.0 kW ----- Diameter: 40 mm Rcjdpfx Ajxz Hh Ueahok Speed: 6,000 rpm Tool circle diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All moulder spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5–24 m/min Infeed roller in front of first lower tool, pneumatically controlled high/low, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment of feed rollers relative to left spindle: 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380–420 V), 50 Hz. Machine frame, tables and fences ----- Jointing table 2.0 m long (incl. straightening fence) Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed behind the top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height 12 mm Electric height adjustment of top spindles and feed Centralized lubrication points on front of machine Electronic digital displays: Spindle 3 and 5 axial, spindle 6 radial, spindle 4 axial and radial Safety and Noise Protection ----- Full safety enclosure Easy high...