Pengering butiran

ERBA EVK 350

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I Bodpfxod Iipms Aa Ueld • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: baik (bekas), Tahun pembuatan: 2012, jangkauan lengan: 2.696 mm, model controller: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data: Maximum Reach: 2,696 mm Rated Payload: 90 kg Rated Additional Load (Carousel / Wrist / Arm): 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Position Repeatability (ISO 9283): +/- 0.06 mm Number of Axes: 6 Mounting Position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1,058 kg Axis Data: Range of Motion: A1: +/- 185° A2: -140° / -5° A3: -120° / 155° A4: +/- 350° A5: +/- 125° A6: +/- 350° Speed at Rated Payload: A1: 136°/s A2: 130°/s A3: 120°/s A4: 292°/s A5: 258°/s A6: 284°/s Blsdpotpwxlefx Aa Uod Operating Conditions: Ambient Temperature during Operation: 10°C to 55°C (283 K to 328 K) Controller: KR C4

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 13639, Steuerung: Heidenhain Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 min⁻¹ Antriebsleistung Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorne am Lager: 70 mm Aufgerüsteter Werkzeugwechsler, Kapazität: 100 Plätze Schwenkrundtisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbereich C-Achse: 360° Maximale Tischbelastung: ca. 1.000 kg Maximaler Werkzeugdurchmesser: 80 mm Maximaler Werkzeugdurchmesser bei freiem Nebenfach: 125 mm Maximale Werkzeuglänge: 300 mm Maximales Werkzeuggewicht: 8 kg Vorschübe: Bodpsinh Rqsfx Aa Usld Eilgang (X/Y/Z): 30 m/min Elektrischer Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Weitere Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Bledst Hw Iispfx Aa Uod Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 331/43, Drilling capacity: 3 mm Blodpfx Aaofnbgqj Uod Throat depth: 100 mm Spindle speeds: 6300 and 9000 rpm Drive motor: 380 V, 0.18 kW Required space: 470 x 250 x 520 mm Weight: 39 kg

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 3 SUB OPERATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 57,297 h - Spindle hours: 39,537 h EQUIPMENT - Control: Fanuc 18iT - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: IEMCA SMART 316/32L - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer. - Electrical transformer - Number of driven tool holders: 3 Bodju Elk Dspfx Aa Ueld

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: X travel: 750 mm Y travel: 600 mm Z travel: 520 mm Table clamping surface: Ø 700 x 500 mm Spindle speed: 42,000 rpm Tool holder: HSK E50 Control system: HEIDENHAIN iTNC 530 Tool changer: 60 positions Rapid traverse: 50 m/min Table load capacity – central / maximum: 350 kg Total power requirement: 50 kVA Machine weight approx.: 9 t Space requirements approx.: 3.2 x 2.65 x 2.8 m 5-axis simultaneous HSC machining center, NC rotary-swivel table 700 x 500 mm, B-axis 180°, C-axis 360°, Chip conveyor, Electronic handwheel, Laser, Prepared for 3D probe HEIDENHAIN TS 641 (without probe) BA 4, Bsdpfewzx Nmox Aa Uold Oil mist extraction, Spindle cooler, No through-spindle coolant (IKZ), Approx. 141,300 power-on hours, approx. 64,500 total spindle hours Machine in good condition (calibration protocol available).

Kondisi: bekas, en_001_TechnicalDetails_2024-06-18 Blodpfx Aaevr S Ulj Usd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penekanan: 225 t, jangkauan kerja: 4.100 mm, Gebrauchte, hochwertige und vollständig gewartete Bystronic 4-Meter x 225-Tonnen hydraulische CNC-Abkantpresse mit Unterantrieb zu verkaufen. Xact Smart 225/4100 Blsdpfx Aajwd R Dho Usd Hersteller: Bystronic Modell: Xact Smart 225/4100 Baujahr / Neumaschine: 2016 Achsen insgesamt: 6 – 4-Achs Hinteranschlag (X, R, Z1, Z2) Hydraulische Bombierung Freistehend, keine Fundamentgrube erforderlich Kapazität / Tischlänge / Presskraft: 4 Meter x 4100 mm x 225 Tonnen CNC-Steuerung: ByVision Touchscreen Vollständig gewartet durch Bystronic UK

Kondisi: hampir baru (bekas), jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 300 mm, rentang pengukuran sumbu Y: 300 mm, rentang pengukuran sumbu Z: 200 mm, berat benda kerja (maks.): 50 kg, tinggi total: 860 mm, lebar total: 782 mm, panjang total: 920 mm, berat keseluruhan: 54 kg, Perlengkapan: dokumentasi / manual, Keyance VL-550 The system has only been used very little. We are happy to provide you with further information at any time upon request. Bedjuactispfx Aa Ueld