Mesin pembengkok tabung

ERCOLINA Medibender MB 42T

Kondisi: baik (bekas), jarak pergerakan sumbu X: 745 mm, jarak lintasan sumbu Y: 370 mm, jarak gerak sumbu Z: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-travel: 745 mm Y-travel: 370 mm Hfodoqgcdtspfx Aqvjl Z-travel: 300 mm Table size: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm (LxWxH)

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine Hedpjng Amkofx Aqvjfl • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2025, Protec welding turning table with 5000 kg load capacity. Speed infinitely adjustable from 0.05 to 0.5 rpm. Handheld remote control. Height: 600 mm. Diameter: 1500 mm. Foot pedal remote control available at extra cost. Hedpfx Aqjid Szcevofl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 13.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, berat keseluruhan: 15.800 kg, jam operasional spindle: 13.500 h, pasokan pendingin: 40 batang, Kami menawarkan mesin Deckel Maho DMU100P Duoblock tahun 2007 dalam kondisi baik, dengan total waktu penggunaan spindel hanya 13.500 jam. Pengendali Heidenhain iTNC530 Jarak perjalanan sumbu X: 1000 mm Jarak perjalanan sumbu Y: 1000 mm Hedpfezlyd Dsx Aqvefl Jarak perjalanan sumbu Z: 1000 mm Pendingin internal 40 bar Spindel SK40 12.000 RPM Meja Ø1100 x 900 Mesin akan tersedia dalam stok dalam 2 minggu ke depan.

Kondisi: bekas, Tahun pembuatan: 2014, panjang total: 1.500 mm, lebar total: 1.150 mm, tinggi total: 2.400 mm, de-to-hu-it-lt-001 Hfodpfx Aqexapftsvjl

Kondisi: bekas, Tahun pembuatan: 2003, spitzenhoehe-255 Hfjdpjwizltofx Aqvel

Kondisi: bekas, Tahun pembuatan: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Turning length: 650 mm Max. workpiece diameter over bed cover: 200 mm Hjdpsdmbrxofx Aqvjfl Centre distance: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirements approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with threading, tailstock quill taper Morse 4, maximum quill travel 200 mm, tailstock offset 550 mm Control cabinet 80x40x230 cm, weight: 150 kg Motor control cabinet with Siemens 810T, dimensions: W/D/H 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws drilling machine, drill bits

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 4.937 h, gaya penekanan: 102 t, berat keseluruhan: 7.200 kg, jumlah sumbu: 8, Diese 8s AMADA HRB 1003 press brake was manufactured in 2023. It offers a pressing force of 1000 kN and a stroke of 250 mm, making it suitable for a variety of applications. With a weight of 7,200 kg and featuring the AMNC3i control system with Lite Mode, it provides advanced functionalities. Take advantage of this opportunity to purchase the AMADA HRB 1003 press brake. Contact us for more details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full-load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3,110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning • Tool clamping: S-GRIP DUO Available tooling: - 3 Amada punches No. 831206, 835 mm long, and 1 segmented version - 3 Amada punches No. 820806, 835 mm long, and 1 segmented version Plus dies: Hodpsyk Dc Njfx Aqvefl - 3 pcs V 16 / H 120 / 85° x 835 mm long and 1 segmented version - 2 pcs V 16 / H 120 / 88° x 835 mm long - 3 pcs V 32 / 85° x 835 mm long and 1 segmented version - 3 pcs V 8 / V 12 / 88° x 835 mm long and 1 segmented version - 3 pcs V 16 / V 25 / 88° x 835 mm long and 1 segmented version - 3 pcs V 8 / V 12 / 30° x 835 mm long and 1 segmented version

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 45 m/menit, pergeseran cepat sumbu Y: 45 m/menit, pergerakan cepat sumbu Z: 45 m/menit, model controller: Heidenhain iTNC530, lebar meja: 960 mm, panjang meja: 600 mm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 40.000 rpm, jam operasional spindle: 22.800 h, hidung spindel: HSK E 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 38, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin ini hanya digunakan untuk pengolahan tembaga. Sistem pendingin air tetap tersedia namun sampai saat ini belum pernah digunakan. Dengan kata lain, ini adalah mesin yang selalu digunakan untuk pekerjaan ringan, belum pernah menggunakan pendingin air, dan dilengkapi spindle Weiss 40.000 rpm. Mesin secara standar dilengkapi dengan: - Dokumentasi asli mesin dan spindle Weiss - Laser alat BLUM - Pengukur 3D Heidenhain TS-440 - Pendingin spindle dan emulsi Hfsdexgukbopfx Aqvel - Atap yang dapat dikunci (model harmonika) Mesin dapat diperlihatkan dalam kondisi teraliri listrik berdasarkan janji temu.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.100 mm, Perlengkapan: dokumentasi / manual, STANDARD EQUIPMENT Special beam and column design produced as a composite structure, which automatically ensures crowning without the need for separate control or manual adjustment. The two upper press cylinders are separately controlled (Y1 and Y2 axes), allowing for quick angle correction when needed. AKAS safety light curtain (motorized) Electric foot pedal with two pedals and panic-stop function Electronic selection for “Teach-In” programming on all axes Upper tool clamp, mechanical quick-change clamping on both sides Inverter – reduced energy consumption High speed function up to 100 tons for workpieces up to 3 m Operating hours counter, initial oil fill AMNC 3i graphical, 18.5” touchscreen controller: Y1, Y2 – right and left press cylinders X1, X2 – backgauge forward-backward movement Z1, Z2 – manual lateral movement of backgauge (4-axis) R – synchronous vertical movement of backgauge Operation from memory or directly via USB Tool library (for AMADA tools only) Programming: 2D graphical, numerical angle and Teach-In programming, external 3D graphic programming software Modular tooling system (835 mm, 415 mm, and sectional design – optional) Digipro angle measuring system, infrared Technical data: Hsdpfx Aqezcg Ixsvefl Pressing force (kN) — 1,000 Table length (mm) — 3,110 Distance between columns (mm) — 2,705 C-frame opening size (mm) — 420 Stroke (Standard) (mm) — 200 Stroke (Long Stroke option) (mm) — 350 Installation height (Standard) (mm) — 470 Installation height (Long Stroke option) (mm) — 620 Table width (mm) — 180 Table height (mm) — 960 Approach speed max. (mm/s) — 200 Working speed (mm/s) — 15 Return speed (mm/s) — 150 Number of controlled axes — 7 Backgauge movement range (X-axis) (mm) — 700 Backgauge movement range (X-axis, support extended) (mm) — 1,020 Backgauge movement range (R-axis) (mm) — 250 Movement speed (X-axis) (mm/s) — 500 Movement speed (R-axis) (mm/s) — 160 Movement speed (Z-axis) (mm/s) — 1,000 Power requirement (kW) — 16.5 Oil tank (liters) — 160 Controller — AMNC 3i graphical, 18.5” touchscreen controller DigiPro wireless angle gauge — standard equipment Machine communication — USB, UTP network External programming capability — via BendCAM software