Balok penjepit untuk menjepit benda kerja dengan cakar dan cakram penjepit.

Erowa, System 3R, Becker Erodiertechnik ER-021128, ER-017646,3R-239-545-9911-V01

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 950 mm, panjang total: 600 mm, tinggi total: 1.850 mm, kebutuhan udara: 0,9 m³/jam, kapasitas tangki: 250 l, tegangan masuk: 230 V, berat keseluruhan: 180 kg, Perlengkapan: kabin, pencahayaan, XTON SANDBLASTER™ is a premium sandblasting and glass bead blasting machine, ideal for workshops with limited workspace. The 250-liter pressure-blast cabinet operates in a closed-loop system and features a unique filtration system with an integrated dust separator. It is designed for exceptionally quiet operation, enhancing operator comfort. The unit is equipped with high-quality, grain leather gloves that are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, the unit is available in a stainless steel version upon request. EQUIPMENT: - Work table with dimensions: 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATIONS: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm Bedporl R Dljfx Aa Towi - Chamber capacity: 250 L - Mains voltage: 230 V / 50 Hz - Rated operating pressure: up to 10 bar - Cleaning performance: 25 m³/h - Cleaning class: SA-3.0 – comprehensive and thorough corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive media valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Work table load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optionally stainless steel

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar Bwsdpfxjph Uk Nj Aa Tji - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. Bedpfxsfxyhfe Aa Towi In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 750 mm, jumlah slot dalam magazin alat: 36, panjang meja: 2.200 mm, lebar meja: 850 mm, model controller: OKUMA-OSP-HMI, pasokan pendingin: 15 batang, jarak dari tengah meja ke hidung spindel: 950 mm, daya motor spindle: 22 W, jumlah spindel: 36, pergerakan cepat sumbu Z: 16 m/menit, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 16 m/menit, hidung spindel: BT 50, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 50 rpm, beban meja: 2.500 kg, diameter alat: 120 mm, panjang alat: 400 mm, berat alat: 20 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, 3-axis vertical machining centre with OKUMA-OSP-HMI CNC Bjdsu Dinkjpfx Aa Towi

Kondisi: siap digunakan (bekas), tinggi total: 3.300 mm, lebar total: 3.450 mm, panjang total: 6.000 mm, produsen pengendali: Siemens, berat kosong: 17.000 kg, Model: FTV 850 Pendinginan melalui spindle Area kerja dapat dibagi menjadi dua bagian 2 meja magnetik Kolom bergerak, mirip dengan Mazak VTC / Unisign / Hedelius Bwsdewxz D Ujpfx Aa Tsi Struktur sasis berat Gerak longitudinal sumbu X: 1800 mm Perjalanan silang sumbu Y: 850 mm Gerak sumbu Z (Tinggi): 800 mm Dimensi area penjepitan - meja: 2300 x 900 mm Universal (2x 360°): ISO 50 Kepala bor (1 x 90°): 19 kW

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Bodju A Dn Njpfx Aa Tjwi

Tahun pembuatan: 2023, Kondisi: baru, SONDA ist eine wirtschaftliche Lösung, um eine Ultraschall-Reinigungseinheit zu erhalten. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschall-Wascheinheit umwandeln möchten, ist SONDA die ideale Wahl. Wir können SONDA-Einheiten unabhängig von den Abmessungen fertigen. Teilen Sie uns einfach die Maße Ihres Tanks mit, und montieren Sie die Einheit mit wenigen Handgriffen an Ihrem Tank. Funktionsprinzip - Jede einzelne, eintauchbare SONDA-Einheit arbeitet mit einem eigenen Hochfrequenzgenerator. - Die eintauchbaren SONDA-Einheiten sind zur einfachen Befestigung an der Tankwand vorbereitet. - Besonders geeignet für große Tanks im Bereich Beschichtung und Oberflächenbehandlung. Bodpfxod I E Ivs Aa Tswi Eintauchschwinger, Ultraschallreiniger, Schwinger, Ultraschall Für technische Details stehen wir Ihnen gerne zur Verfügung.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, de Bwsdpov Rqftjfx Aa Tei

Tahun pembuatan: 2007, Kondisi: diremajakan ulang (bekas), GF AgieCharmilles Progress V3 Bedpfxommfwuo Aa Tswi Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in water bath) / 800 kg (out of water bath) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled upon receipt of order. You will receive a 6-month warranty on all machine components. We are also pleased to offer you commissioning and training services.

Kondisi: baik (bekas), Tahun pembuatan: 2008, HWACHEON HI-TECH 200B CNC DREHBANK HERSTELLER: HWACHEON, HERGESTELLT IN SÜDKOREA MODELL: HI-TECH 200B BAUJAHR: 2008 STEUERUNG: FANUC Oi-TB SPITZENDURCHGANG ÜBER BETT: 500,0 mm SPITZENDURCHGANG ÜBER SCHLITTEN: 390,0 mm MAX. BEARBEITUNGSDURCHMESSER: 350,0 mm MAX. WERKSTÜCKLÄNGE: 400,0 mm VERFAHRWEGE (XZ): X-ACHSE: 195,0 mm Z-ACHSE: 430,0 mm FUTTERDURCHMESSER: 250,0 mm Bwsdpjt Urwhofx Aa Tsi MAX. SPINDEL-DREHZAHL: 3.500 U/min SPINDELNASE: A2-8 SPINDELDURCHLASS: 76 mm REVOLVER: 12 STATIONEN MASCHINENGEWEICHT: 4.500 kg ZUSATZAUSSTATTUNG: - RENISHAW MESSTASTER - TEILEFÄNGER - REITSTOCK - SPÄNEFÖRDERER - MASCHINENHANDBÜCHER MASCHINE IN GUTEM FUNKTIONSZUSTAND